Pc Building Simulator

Pc Building Simulator presents an interesting scaling pattern for the AMD Ryzen 7 5700 and NVIDIA GeForce GTX 1070 combination. At 1080p Low, the system delivers 182.9 FPS, but this drops to 31.2 FPS at 4K High, a reduction of approximately 83%. This dramatic falloff indicates that the GTX 1070 becomes the primary limiting component as resolution increases, while the CPU's 8-core, 16-thread configuration provides sufficient headroom at lower resolutions.

Resolution Scaling

The measured FPS data shows a clear trend: performance degrades steadily as resolution climbs, but the rate of degradation is heavily influenced by the graphics preset. At 1080p Low, the combo achieves 182.9 FPS, which is more than double the 88.7 FPS seen at 1080p Ultra. Moving to 1440p, the Low preset still manages 115.8 FPS, while Ultra drops to 57.2 FPS. At 4K, the gap narrows in absolute terms—Low yields 62.2 FPS, Medium 42.7 FPS, High 31.2 FPS, and Ultra 28.6 FPS—but the relative cost of Ultra versus Low becomes more pronounced.

The 4K Ultra result of 28.6 FPS is just barely above the 31.2 FPS of 4K High, suggesting that the GPU is nearing its limits. The GTX 1070's 8 GB of GDDR5 memory and 256-bit bus width, providing 256.3 GB/s of bandwidth, are likely the constraining factors at this resolution. The gap between 1080p and 1440p is notable: at High settings, the FPS drops from 91.8 to 57.1, a 38% reduction. This is a larger proportional drop than the 1440p to 4K transition at High, which goes from 57.1 to 31.2 FPS (45% reduction). This indicates that the GPU's pixel fill rate and memory bandwidth are increasingly taxed as pixel count grows.

Interestingly, the Low preset shows less severe scaling: 182.9 FPS at 1080p, 115.8 FPS at 1440p, and 62.2 FPS at 4K. This suggests that at Low settings, the CPU and GPU are better balanced, with the Ryzen 7 5700's 16 threads able to feed the GPU more effectively. The 4K Low result of 62.2 FPS is playable, but the 4K High and Ultra results fall below 32 FPS, making them unsuitable for smooth gameplay.

FAQ

Q: What is the best resolution for this combo in Pc Building Simulator?

A: The data shows that 1080p is the sweet spot, with all presets delivering above 88 FPS. At 1440p, only Low and Medium presets exceed 84 FPS, while High and Ultra dip to 57.1 and 57.2 FPS respectively. 4K is only playable at Low settings (62.2 FPS).

Q: How does the GTX 1070 perform relative to its nearest rivals?

A: The GTX 1070's average benchmark score is 12,331, placing it 0.7% higher than the NVIDIA Quadro K4200 (12,241) and 1.3% lower than the GeForce GTX 880M (12,490). It is also 1.4% behind the GTX 1650 SUPER (12,504) and 1.7% behind the Tesla K20Xm (12,547).

Q: Is the Ryzen 7 5700 a bottleneck at 1080p?

A: Based on the FPS data, at 1080p Low the system reaches 182.9 FPS, which is likely near the CPU's limit in this simulation game. The CPU's single-thread score of 901 in 3DMark and multi-thread score of 6,617 suggest it can handle high frame rates, but the GTX 1070's 51st percentile ranking among all GPUs indicates it may limit higher presets.

Q: What is the combo's ranking among tested configurations?

A: This combo ranks 1,485 out of 1,769 tested combos for Pc Building Simulator, placing it in the bottom 16% of all configurations. This reflects the GPU's age and mid-range position.

Q: How does the CPU's performance compare to its nearest rivals?

A: The Ryzen 7 5700 has an average benchmark score of 27,220, which is 0.7% higher than the Intel Core i9-9900K (27,043) and 0.8% higher than both the Core i7-12700H (27,006) and Core i7-1370P (26,991). It is 1.2% ahead of the AMD Ryzen AI 5 340 (26,909).

Q: Can this system handle 4K gaming?

A: Only at Low settings, where it achieves 62.2 FPS. Medium drops to 42.7 FPS, High to 31.2 FPS, and Ultra to 28.6 FPS. None of the higher presets reach the 60 FPS threshold at 4K.

Settings Recommendations

For 1080p gaming, the Ultra preset (88.7 FPS) is the best choice, as it provides the highest visual quality while still maintaining a smooth frame rate above 60 FPS. The High preset (91.8 FPS) is nearly identical in performance and could be used if slightly higher frame rates are preferred. At 1440p, the Medium preset (84.8 FPS) offers the best balance, delivering over 80 FPS while preserving decent visual fidelity. The High preset (57.1 FPS) and Ultra preset (57.2 FPS) are both playable but sit below the 60 FPS threshold, making them less ideal for fast-paced scenes.

For 4K, only the Low preset (62.2 FPS) is recommended for actual gameplay. The Medium preset (42.7 FPS) is borderline, but the High (31.2 FPS) and Ultra (28.6 FPS) presets should be avoided due to sub-30 FPS performance. The data suggests that Pc Building Simulator is not particularly demanding on the CPU at lower settings, as the Ryzen 7 5700's 16 threads can easily handle the simulation logic, but the GTX 1070's 64 ROPs and 6.463 TFLOPS of FP32 compute become the limiting factor at higher resolutions.

How This Combo Ranks

This configuration ranks 1,485 out of 1,769 tested combos for Pc Building Simulator, placing it in the 16th percentile. This low ranking is primarily due to the GTX 1070's age—it was released in 2016 and is now end-of-life. The GPU's 51st percentile ranking among all GPUs means it sits near the median, but the CPU's 84th percentile ranking among all CPUs is significantly higher. This mismatch suggests the GPU is the bottleneck in most scenarios.

The combo's ranking reflects its performance in a simulation game that likely relies more on CPU logic than GPU rendering. The Ryzen 7 5700's strong multi-threaded performance (Cinebench R23 multi-core score of 20,655) helps maintain high frame rates at 1080p, but the GPU struggles to keep up at higher resolutions. Compared to other combos in the database, this pairing is better suited for 1080p gaming or 1440p at medium settings, rather than high-refresh-rate or 4K gaming.

GPU Role

The NVIDIA GeForce GTX 1070 is built on the Pascal architecture using TSMC's 16 nm process, with 7,200 million transistors on a 314 mm² die. It features 1,920 shading units, 120 texture mapping units, and 64 ROPs. The GPU operates at a base clock of 1506 MHz with a boost clock of 1683 MHz, and its memory runs at 2002 MHz (8 Gbps effective) across a 256-bit bus, yielding 256.3 GB/s of bandwidth.

The 8 GB GDDR5 memory capacity is sufficient for Pc Building Simulator at 1080p and 1440p, but the 4K Ultra settings (28.6 FPS) suggest that memory bandwidth and capacity are stretched. The GPU's pixel rate of 107.7 GPixel/s and texture rate of 202.0 GTexel/s are modest by modern standards, explaining the significant FPS drop when moving from 1080p to 4K. The GTX 1070's DirectX 12 score of 48 in PassMark is notably low, which could impact performance in newer titles, but Pc Building Simulator's 2019 release date means it likely relies on DirectX 11, where the GPU scores 100.

The GPU's average benchmark score of 12,331 places it right at the 51st percentile, directly between the Quadro K4200 (0.7% lower) and the GTX 880M (1.3% higher). This indicates that the GTX 1070 is still a capable mid-range card, but its performance ceiling is evident in the 4K results. The 150 W TDP and dual-slot design are consistent with its 2016-era performance class, and the 450 W suggested PSU provides adequate headroom for this configuration.