Pc Building Simulator
This combination provides smooth gameplay with an average of 109 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 39 | 41 | 58 | 82 |
| 1440p QHD | 74 | 78 | 111 | 156 |
| 1080p Full HD | 118 | 124 | 175 | 247 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Pc Building Simulator with AMD Ryzen 5 7500X3D + AMD Radeon RX 9060, In-Depth Analysis
Pc Building Simulator presents an interesting case for the AMD Ryzen 5 7500X3D and AMD Radeon RX 9060 combination. The data shows a component pairing that is heavily influenced by resolution, with the CPU's large cache and the GPU's mid-range capabilities creating distinct performance profiles. The benchmark results indicate a system that excels at high refresh rates in lower resolutions but faces significant challenges when pushed to 4K, making it a study in balance and bottleneck behavior.
Resolution Scaling
The measured FPS data reveals a dramatic shift in performance as resolution increases, clearly illustrating where the system's limits reside. At 1080p with Low settings, the combo achieves an average of 247 FPS, which is an exceptional figure that suggests the CPU and GPU are working in a well-balanced state. Moving to 1440p at the same settings drops the average to 156 FPS, a reduction of approximately 37%, while 4K Low sees a further decline to 82 FPS, which is about 47% lower than the 1440p result. This scaling pattern is typical of a system where the GPU becomes increasingly dominant as the pixel count rises.
The trend becomes more pronounced when examining higher quality presets. At High settings, the average FPS falls from 124 at 1080p to 78 at 1440p, and then plummets to 41 at 4K. The 4K High result is a 67% drop from the 1080p High figure, indicating that the RX 9060 is struggling to maintain playable frame rates at the highest resolution. The Ultra preset follows a similar trajectory: 118 FPS at 1080p, 74 at 1440p, and just 39 at 4K. The gap between 1080p and 4K at Ultra is a stark 67%, reinforcing the notion that this is a GPU-bound scenario at 4K.
What makes this data particularly revealing is the comparison between resolution scaling at different settings. The Low preset shows a more gradual decline (247 to 156 to 82) compared to the Ultra preset (118 to 74 to 39). This suggests that at Low settings, the CPU has more headroom to feed frames, but at Ultra, the GPU's workload becomes the primary constraint. The 4K Medium row provides additional context with an average of 58 FPS and a minimum of 49 FPS, showing that even mid-tier settings at 4K can push the system to its limits. The data implies that the limiting component at 4K is unequivocally the GPU, as the CPU's performance headroom is unlikely to be exhausted at such high pixel counts.
CPU Role
The Ryzen 5 7500X3D brings a 6-core, 12-thread configuration with a base clock of 4.00 GHz and a boost clock of 4.50 GHz. Its defining feature is the 96 MB shared L3 cache, which is a substantial amount for gaming workloads. The CPU's benchmark scores paint a picture of a processor that excels in specific areas: the PassMark single-thread score of 3494 and multi-thread score of 25047 indicate strong per-core performance, while the data compression score of 271649 and integer math score of 70774 show robust throughput in calculation-heavy tasks. The processor sits in the 89th percentile among all CPUs, with an average benchmark score of 44573.
In Pc Building Simulator, the CPU's role is particularly interesting because the game's simulation mechanics rely heavily on processing the state of virtual components. The 96 MB L3 cache is likely beneficial for keeping game state data close to the cores, reducing latency when accessing frequently used information. The nearest rival data shows the Ryzen 5 7500X3D is 0.2% ahead of the Intel Core Ultra X9 388H and 0.5% ahead of the Intel Core i9-13950HX, which are both high-end mobile processors. This suggests the CPU is competitive with top-tier chips despite its desktop platform positioning.
The CPU's impact on frame rates is most evident at 1080p Low, where the 247 FPS result indicates the processor can keep up with the GPU's output. However, the data does not show a scenario where the CPU becomes a bottleneck at higher resolutions, as the frame rates scale predictably with GPU load. The 65W TDP and 5 nm process node suggest power efficiency, which could allow for sustained boost clocks during extended gaming sessions. The lack of an unlocked multiplier means overclocking is not an option, but the stock performance appears well-suited for this simulation title.
FAQ
Q: What is the best resolution for this combo in Pc Building Simulator?
A: The data shows 1440p as the sweet spot, offering 156 FPS at Low, 111 FPS at Medium, and 78 FPS at High. This provides a balance between visual quality and high frame rates, as 4K drops to 82 FPS at Low and just 41 FPS at High.
Q: Does the CPU bottleneck the GPU at 1080p?
A: At 1080p Low, the 247 FPS average suggests the CPU is keeping pace, but the 118 FPS at Ultra indicates the GPU becomes the limiting factor. The CPU's 89th percentile ranking and 96 MB L3 cache likely prevent it from being a bottleneck at any tested resolution.
Q: How does the RX 9060 compare to its closest rivals?
A: The RX 9060 has an average benchmark score of 16014, which is 0.7% behind the NVIDIA GeForce RTX 3060 Ti (16129). It is 1% ahead of both the AMD Radeon R9 370X and AMD Radeon RX 7700, and 2.1% ahead of the AMD Radeon Pro W5500.
Q: What is the CPU's percentile ranking among all processors?
A: The Ryzen 5 7500X3D is in the 89th percentile of all CPUs, with an average benchmark score of 44573. It is 0.2% ahead of the Intel Core Ultra X9 388H and 0.5% ahead of the Intel Core i9-13950HX in average score.
Q: Is 4K playable with this combination?
A: The data shows 4K Medium achieves an average of 58 FPS with a minimum of 49 FPS, which is playable. However, 4K High (41 FPS) and 4K Ultra (39 FPS) fall below the 60 FPS threshold, suggesting users should stick to Medium or lower for a smoother experience.
Q: How much FPS is lost when moving from 1080p to 4K at High settings?
A: The average FPS drops from 124 at 1080p High to 41 at 4K High, representing a 67% decrease. This indicates a significant GPU workload increase at higher resolutions.
How This Combo Ranks
The combination of the Ryzen 5 7500X3D and RX 9060 ranks 1710 out of 3002 tested combos in Pc Building Simulator. This places it in the 57th percentile of all combinations, which is a mid-pack position. The ranking suggests that while this pairing is capable, it is not among the top performers for this game. The data implies that other combos with higher-end GPUs or more powerful CPUs likely achieve better frame rates, particularly at higher resolutions.
The rank becomes more understandable when considering the GPU's percentile vs all GPUs at 59, which is slightly above the CPU's 89th percentile vs all CPUs. This mismatch indicates the GPU is the weaker link in the pairing, pulling the overall combo ranking down. The CPU's strong performance is somewhat wasted at 4K where the GPU cannot keep up, but at 1080p, the combo demonstrates its potential with frame rates exceeding 240 FPS at Low settings. The ranking also reflects that Pc Building Simulator may be more demanding on GPU resources than CPU resources, as the 4K Ultra result of 39 FPS is clearly insufficient for a smooth experience.
The delta percentages from the nearest rivals provide context: the RX 9060 is within 1% of the RTX 3060 Ti, meaning the combo's ranking would likely be similar with a comparable GPU. The 1710th position out of 3002 combos indicates there are 1291 combos that perform better, which is a substantial number. This suggests that for users prioritizing frame rates in this simulation game, investing in a higher-tier GPU would yield more significant improvements than upgrading the CPU.
Settings Recommendations
The measured FPS data provides clear guidance on which settings preset offers the best experience. At 1080p, all presets are playable, with Ultra achieving 118 FPS and Low reaching 247 FPS. The Medium preset offers a balanced 175 FPS with a minimum of 149 FPS, which ensures smooth gameplay without excessive frame drops. For users with high refresh rate monitors, the Low preset's 247 FPS is ideal for maximizing refresh rates, but the Medium preset provides a better balance of visual quality and performance.
At 1440p, the Medium preset stands out with 111 FPS and a minimum of 94 FPS, which maintains a solid frame rate while offering improved visuals over Low. The High preset at 78 FPS is still playable, but the Ultra preset's 74 FPS is approaching the lower bound of what is comfortable for fast-paced gameplay. For 4K, the Medium preset is the only option that provides a consistently playable experience, with an average of 58 FPS and a minimum of 49 FPS. The High and Ultra presets at 4K (41 and 39 FPS respectively) are not recommended for a smooth experience.
The data suggests that Medium is the best overall preset for this combo, as it provides high frame rates at both 1080p and 1440p while maintaining playability at 4K. The Low preset offers the highest frame rates but sacrifices visual fidelity, while the Ultra preset's performance gains over High are minimal in terms of FPS impact. For users who prioritize frame rate consistency, the Medium preset's minimum FPS values (149 at 1080p, 94 at 1440p, 49 at 4K) indicate it is the safest choice across all resolutions.
Measured FPS Breakdown
The complete dataset reveals a consistent pattern of performance scaling across resolutions and settings. At 1080p, the average FPS ranges from 247 at Low to 118 at Ultra, with Medium at 175 (min 149, max 201) and High at 124. The 1440p results show 156 FPS at Low, 111 FPS at Medium (min 94, max 127), 78 FPS at High, and 74 FPS at Ultra. The 4K results are notably lower: 82 FPS at Low, 58 FPS at Medium (min 49, max 66), 41 FPS at High, and 39 FPS at Ultra.
The minimum FPS data, where available, provides insight into frame pacing. At 1080p Medium, the minimum of 149 FPS is 85% of the average, indicating good consistency. At 1440p Medium, the minimum of 94 FPS is 85% of the average, which is also reasonable. The 4K Medium minimum of 49 FPS is 84% of the average, showing a similar level of consistency despite the lower overall performance. This data suggests the combo maintains stable frame delivery across resolutions, without severe stuttering or frame drops.
The gap between Low and Ultra settings widens as resolution increases. At 1080p, the difference is 129 FPS (247 to 118), at 1440p it is 82 FPS (156 to 74), and at 4K it is 43 FPS (82 to 39). This narrowing gap indicates that at higher resolutions, the GPU is so heavily loaded that the difference between Low and Ultra settings has less impact on absolute FPS. The data implies that the GPU's 8 GB VRAM and 128-bit memory bus are sufficient for this game at tested settings, as no VRAM-related issues are apparent in the frame rates.
GPU Role
The Radeon RX 9060 is built on the RDNA 4.0 architecture with a Navi 44 chip, featuring 1792 shading units, 112 texture mapping units, and 64 render output units. It operates with a base clock of 1700 MHz and a boost clock of 2990 MHz, with a game clock of 2400 MHz. The 8 GB of GDDR6 memory on a 128-bit bus provides 288.0 GB/s of bandwidth, which is a moderate figure for modern games. The GPU's PassMark G3D score of 17631 and 3DMark Steel Nomad DX12 score of 3322 indicate it performs in the mid-range tier, placing it in the 59th percentile of all GPUs.
In Pc Building Simulator, the GPU's role is primarily to handle the rendering of 3D models and textures of computer components. The game's simulation nature means it likely does not stress the GPU as heavily as action-oriented titles, but the 4K results show clear GPU limitations. The 39 FPS at 4K Ultra indicates the GPU is the limiting factor at this resolution, as the CPU's strong benchmark scores suggest it could feed more frames if the GPU could render them. The GPU's 21.43 TFLOPS FP32 performance is a theoretical ceiling that the game does not fully utilize, as evidenced by the significant FPS drop from 1080p to 4K.
The nearest rival comparisons show the RX 9060 is closely matched with the RTX 3060 Ti, which is a previous-generation mid-range card. This positioning suggests the RX 9060 is designed to compete in the mainstream segment, offering adequate performance for 1080p and 1440p gaming. The 4K performance, while not stellar, is playable at Medium settings, which is a reasonable expectation for a GPU in this class. The 8 GB VRAM is sufficient for this game's requirements, as the frame rates do not show signs of memory capacity issues. The GPU's 132W TDP and single 8-pin power connector indicate it is power-efficient, which could help with thermal management in the simulated PC building scenarios.
Hardware Specifications
AMD Ryzen 5 7500X3D
AMD Radeon RX 9060
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 7500X3D + AMD Radeon RX 9060 in Pc Building Simulator
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 82.0 |
| 3840x2160 | Medium | 58.0 |
| 3840x2160 | High | 41.0 |
| 3840x2160 | Ultra | 39.0 |
| 2560x1440 | Low | 156.0 |
| 2560x1440 | Medium | 111.0 |
| 2560x1440 | High | 78.0 |
| 2560x1440 | Ultra | 74.0 |
| 1920x1080 | Low | 247.0 |
| 1920x1080 | Medium | 175.0 |
| 1920x1080 | High | 124.0 |
| 1920x1080 | Ultra | 118.0 |
Pc Building Simulator with Ryzen 5 7500X3D + Other GPUs
See how Pc Building Simulator performs with the same CPU but different graphics cards.
Pc Building Simulator with RX 9060 + Other CPUs
See how Pc Building Simulator performs with the same GPU but different processors.
Other Games with Ryzen 5 7500X3D + RX 9060
Explore FPS benchmarks for other games using this same hardware combination.