Pc Building Simulator
This combination delivers exceptional performance with an average of 151 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 56 | 56 | 81 | 112 |
| 1440p QHD | 104 | 110 | 153 | 219 |
| 1080p Full HD | 165 | 176 | 245 | 340 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Pc Building Simulator with AMD Ryzen 5 5600X + AMD Radeon RX 9070, In-Depth Analysis
Pc Building Simulator is a simulation title that rarely stresses modern hardware, but the measured data for this AMD Ryzen 5 5600X and Radeon RX 9070 combination reveals a clear performance hierarchy across resolutions and settings. The dataset shows that this combo is far more capable than the game demands, with the limiting factor shifting from the CPU at lower resolutions to the GPU at 4K Ultra.
Resolution Scaling
The FPS scaling from 1080p to 4K follows a predictable pattern, but the magnitude of the drop depends heavily on the graphics preset. At Low settings, the average frame rate falls from 339.9 FPS at 1920x1080 to 111.8 FPS at 3840x2160, a reduction of roughly 67%. This steep decline indicates that even at Low settings, the GPU is the primary bottleneck at higher resolutions, as the CPU has ample headroom to feed frames.
The scaling curve changes character at Medium settings. Here, the 1080p result is 244.6 FPS, which drops to 152.5 FPS at 2560x1440 and then to 80.6 FPS at 4K. The percentage drop from 1440p to 4K is about 47%, which is larger than the 38% drop from 1080p to 1440p. This shows that the RX 9070's rendering load grows super-linearly with pixel count, a typical sign that fill-rate and memory bandwidth are becoming more important.
At High and Ultra presets, the scaling becomes more gradual in absolute terms but still substantial. High settings produce 175.8 FPS at 1080p, 110.1 FPS at 1440p, and 55.7 FPS at 4K. Ultra is nearly identical to High, with 164.8 FPS at 1080p, 103.9 FPS at 1440p, and 56.1 FPS at 4K. The close similarity between High and Ultra results across all resolutions suggests that the Ultra preset adds minimal extra load in this game, or that the GPU is already saturated at High settings. The data indicates that the CPU is not the limiting factor at 1080p, since even the heaviest preset still achieves over 160 FPS.
How This Combo Ranks
Out of 1769 tested combinations, this pairing of AMD Ryzen 5 5600X and AMD Radeon RX 9070 holds the 567th position in Pc Building Simulator. That places it in roughly the 68th percentile of all combos, which is a strong result for a game that is not particularly demanding. The rank suggests that while this combo is far from the top, it sits well above the median and can handle the game with ease at most settings.
The CPU itself ranks in the 78th percentile of all processors, with an average benchmark score of 20680. Its nearest rivals include the AMD Ryzen 5 5600GT and Intel Core i7-10700, both of which score within 0.3% of the 5600X. The Intel Core i5-12490F is 0.5% behind, while the Intel Xeon 6325P is 0.7% ahead. These tiny deltas mean that swapping between these CPUs would produce no perceptible difference in Pc Building Simulator, reinforcing that the game is not CPU-bound.
The GPU's percentile is 79, with an average benchmark score of 34780. Its nearest rivals are the NVIDIA A2 (0.2% behind), NVIDIA Quadro GV100 (0.3% ahead), AMD Radeon HD 7970 (0.7% ahead), and AMD Radeon PRO W6400 (0.8% ahead). These are unusual comparisons, but they show that the RX 9070's raw compute score is competitive with a wide range of accelerators. In practical terms, the combo's 567th rank out of 1769 means that most users with this setup will never see the game struggle, even at high refresh rates.
GPU Role
The Radeon RX 9070 is built on the RDNA 4.0 architecture with a Navi 48 chip, manufactured on a 4 nm process by TSMC. It packs 53,900 million transistors on a 357 mm² die, giving it a transistor density of 151.0M per mm². The GPU has 3584 shading units, 224 texture mapping units, and 128 raster output units, along with 56 ray tracing cores. Its pixel rate is 322.6 GPixel/s and texture rate is 564.5 GTexel/s.
Memory is a strong suit for this card. It comes with 16 GB of GDDR6 on a 256-bit bus, providing 644.6 GB/s of bandwidth. The memory clock runs at 2518 MHz, which translates to 20.1 Gbps effective. This large memory pool is more than sufficient for Pc Building Simulator, and the high bandwidth helps maintain frame rates when the resolution scales up. The base clock is 1330 MHz, with a game clock of 2070 MHz and a boost clock of 2520 MHz.
The measured FPS data suggests that the GPU is the limiting factor at 4K, particularly on Ultra settings where the average drops to 56.1 FPS. At 1080p, the GPU is not stressed, as even Ultra settings produce 164.8 FPS. The card's FP32 performance of 36.13 TFLOPS and FP16 of 72.25 TFLOPS (2:1) are far beyond what this simulation title needs. The 220 W TDP and dual-slot design are typical for this performance class, and the PCIe 5.0 x16 interface provides ample bandwidth.
Settings Recommendations
For the best experience, the data points to Medium settings as the sweet spot. At 1920x1080, Medium delivers 244.6 FPS, which is 39% higher than High settings and 48% higher than Ultra. Even at 2560x1440, Medium produces 152.5 FPS, comfortably above the 144 Hz refresh rate that many monitors target. The jump from Low to Medium costs about 28% performance at 1080p (from 339.9 to 244.6 FPS), but the visual improvement is typically worth it for a simulation game where readability of UI elements matters.
At 4K, Medium is the only preset that keeps the average above 60 FPS, hitting 80.6 FPS. High and Ultra both fall to around 56 FPS, which is playable but not ideal for a game that involves menu navigation and detailed PC component inspection. Low at 4K gives 111.8 FPS, but the visual quality loss is significant. For 1440p users, High settings at 110.1 FPS are a good balance, as the difference from Medium is only 42 FPS but the visual upgrade is noticeable. Ultra is not recommended at any resolution because it provides nearly identical performance to High (103.9 vs 110.1 at 1440p) with no measurable benefit in the data.
Measured FPS Breakdown
The complete dataset shows a consistent pattern across all twelve measured configurations. At 1920x1080, the average frame rates are 339.9 FPS on Low, 244.6 FPS on Medium, 175.8 FPS on High, and 164.8 FPS on Ultra. The gap between Low and Medium is 95.3 FPS, while the gap between Medium and High is 68.8 FPS. High and Ultra are closer, with a difference of only 11 FPS, suggesting diminishing returns at the top end.
Moving to 2560x1440, the numbers are 219.3 FPS on Low, 152.5 FPS on Medium, 110.1 FPS on High, and 103.9 FPS on Ultra. The scaling from 1080p to 1440p reduces performance by 35% on Low, 38% on Medium, 37% on High, and 37% on Ultra. This consistent ~37% drop indicates that the rendering load scales predictably with pixel count, and the GPU handles the extra work without hitting a memory or bandwidth wall.
At 3840x2160, the averages are 111.8 FPS on Low, 80.6 FPS on Medium, 55.7 FPS on High, and 56.1 FPS on Ultra. The drop from 1440p to 4K is 49% on Low, 47% on Medium, 49% on High, and 46% on Ultra. The fact that High and Ultra are statistically identical at 4K (55.7 vs 56.1) strongly suggests that both presets are hitting the same GPU limit. This is likely a fill-rate bottleneck, given the 128 ROPs and the high pixel count.
FAQ
Q: Can this combo run Pc Building Simulator at 4K 60 FPS?
A: Yes, but only on Medium settings, where the average is 80.6 FPS. High and Ultra both fall to around 56 FPS, which is below the 60 FPS threshold.
Q: What is the best setting for 1440p gaming with this setup?
A: High settings provide 110.1 FPS, which is a good balance. Medium gives 152.5 FPS if you prefer higher frame rates, while Ultra drops to 103.9 FPS with no clear visual benefit.
Q: Is the CPU or GPU the limiting factor at 1080p?
A: The data shows the CPU is not limiting. At 1080p Low, the combo hits 339.9 FPS, and even Ultra achieves 164.8 FPS. The Ryzen 5 5600X, with a 78th percentile ranking and an average score of 20680, has enough headroom.
Q: How does this combo rank against other tested systems?
A: It ranks 567th out of 1769 combos, placing it in the upper half of all tested configurations. This is a solid result for a simulation game that is not graphically intensive.
Q: What is the difference between High and Ultra settings in this game?
A: Based on the measured data, the difference is minimal. At 1080p, High gives 175.8 FPS and Ultra gives 164.8 FPS. At 4K, they are nearly identical at 55.7 and 56.1 FPS, respectively.
Q: Does the 16 GB VRAM make a difference in this game?
A: The RX 9070 has 16 GB of GDDR6 memory with 644.6 GB/s bandwidth. The measured FPS data does not show any VRAM-related stuttering or drops, indicating that 16 GB is more than sufficient for Pc Building Simulator at any tested resolution.
Hardware Specifications
AMD Ryzen 5 5600X
AMD Radeon RX 9070
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 5600X + AMD Radeon RX 9070 in Pc Building Simulator
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 111.8 |
| 3840x2160 | Medium | 80.6 |
| 3840x2160 | Ultra | 56.1 |
| 3840x2160 | High | 55.7 |
| 2560x1440 | Low | 219.3 |
| 2560x1440 | Medium | 152.5 |
| 2560x1440 | High | 110.1 |
| 2560x1440 | Ultra | 103.9 |
| 1920x1080 | Low | 339.9 |
| 1920x1080 | Medium | 244.6 |
| 1920x1080 | High | 175.8 |
| 1920x1080 | Ultra | 164.8 |
Pc Building Simulator with Ryzen 5 5600X + Other GPUs
See how Pc Building Simulator performs with the same CPU but different graphics cards.
Pc Building Simulator with RX 9070 + Other CPUs
See how Pc Building Simulator performs with the same GPU but different processors.
Other Games with Ryzen 5 5600X + RX 9070
Explore FPS benchmarks for other games using this same hardware combination.