Palworld

Palworld

AVERAGE FPS
61
good

This combination provides smooth gameplay with an average of 61 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 22 28 37 46
1440p QHD 39 51 66 82
1080p Full HD 59 78 101 125

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 46
3840x2160 Medium 37
3840x2160 High 28
3840x2160 Ultra 22
2560x1440 Low 82
2560x1440 Medium 66
2560x1440 High 51
2560x1440 Ultra 39
1920x1080 Low 125
1920x1080 Medium 101
1920x1080 High 78
1920x1080 Ultra 59

Palworld with Intel Core Ultra 7 265 + NVIDIA GeForce GTX 1070, In-Depth Analysis

Palworld’s measured performance with the Intel Core Ultra 7 265 and NVIDIA GeForce GTX 1070 shows a clear trade-off between visual fidelity and frame rate. The data indicates that this combination is best suited for 1080p gaming, where it can deliver playable to highly fluid performance across most presets. At higher resolutions, the GTX 1070 becomes the primary bottleneck, making compromises necessary for a smooth experience.

Settings Recommendations

For this specific hardware pairing, the benchmark results point to Medium settings at 1920x1080 as the optimal balance. The measured average of 101 FPS with a minimum of 86 FPS and a maximum of 116 FPS provides a consistently smooth experience that is well above the threshold for comfortable play. This preset offers a significant jump from the 59 FPS average seen at Ultra, while maintaining a much higher frame rate than the 78 FPS average of High settings.

If you prioritize visual quality over maximum frame rate, High settings at 1920x1080 are still viable. The 78 FPS average is playable, and it represents a 32% improvement over the Ultra preset’s 59 FPS. However, the data suggests that the jump from Medium to High costs you 23 FPS on average, which is a substantial hit for what may be a marginal visual gain in a game like Palworld. The measured frame times for Medium are also tighter, with the minimum of 86 FPS being far more stable than the 59 FPS average of Ultra.

At 2560x1440, the situation changes. The Medium preset is the only sensible choice for a consistent experience, delivering an average of 66 FPS with a minimum of 57 FPS. This is the only 1440p setting that stays above the 60 FPS line on average. High settings at this resolution drop the average to 51 FPS, which is playable but noticeably less fluid. Low settings are the only way to get above 60 FPS at 1440p, with an 82 FPS average, but this comes at the cost of significant visual downgrades.

For 3840x2160, the data is clear: this GPU is not suited for 4K Palworld. Even the Low preset only manages a 46 FPS average, which falls below the standard of smooth gameplay. The Medium preset’s 37 FPS average with a minimum of 31 FPS confirms that 4K is not a practical target for this combination. You would be sacrificing too much visual fidelity for a frame rate that is still not ideal.

The Low preset at 1080p yields a 125 FPS average, indicating headroom for competitive play or for users with high-refresh-rate monitors. However, the substantial jump in frame rate from Low to Medium (24 FPS) is a strong indicator that the Medium preset is the most efficient use of the hardware, offering a balanced experience without the harsh visual compromises of Low.

GPU Role

The NVIDIA GeForce GTX 1070 is the defining component in this pairing, acting as the main performance limiter in Palworld. Its 8 GB of GDDR5 memory on a 256-bit bus, with a bandwidth of 256.3 GB/s, is sufficient for 1080p but struggles as resolution increases. The benchmark data shows a clear scaling pattern: as resolution increases from 1920x1080 to 2560x1440 to 3840x2160, average frame rates across all settings drop by roughly 35-50% at each step. This is a classic indicator of a GPU hitting its memory bandwidth and raw compute limits.

The card’s compute capabilities, measured at 6.463 TFLOPS of FP32 performance, are adequate for Palworld’s stylized graphics at lower resolutions. The boost clock of 1683 MHz (from a base of 1506 MHz) provides the necessary headroom, but the aging Pascal architecture lacks the dedicated ray tracing and tensor cores found in newer GPUs, which are not utilized in this game’s rendering path. The GTX 1070’s performance relative to other GPUs, sitting at the 47th percentile, underscores its mid-range position in the current landscape.

The measured frame rates show that at 1080p, the GPU can keep up with the CPU’s ability to feed it frames, as evidenced by the high averages on Low and Medium settings. However, at 1440p and especially 4K, the GPU’s fill rate and memory subsystem become overwhelmed. The drop from 101 FPS at 1080p Medium to 66 FPS at 1440p Medium is a 35% reduction, while the jump to 4K Medium results in a 63% reduction from the 1080p figure. This pattern demonstrates that the GTX 1070’s performance is directly tied to pixel count, and its 8 GB frame buffer is a limiting factor for high-resolution textures and effects.

FAQ

Q: Can this CPU and GPU combo run Palworld smoothly at 1920x1080?

A: Yes, but you should use Medium settings for the best experience. The data shows a 101 FPS average with a minimum of 86 FPS at 1080p Medium. High settings are also playable at 78 FPS average, while Ultra drops to 59 FPS.

Q: Is this setup capable of 1440p gaming in Palworld?

A: It is marginal. The only preset that averages above 60 FPS is Low, at 82 FPS. Medium settings produce a 66 FPS average, which is playable, but High drops to 51 FPS and Ultra to 39 FPS. For a consistent experience, Medium is the highest you should consider.

Q: What frame rate can I expect at 4K resolution?

A: The GTX 1070 is not suitable for 4K Palworld. Even on Low settings, the average is only 46 FPS. Medium yields 37 FPS, High 28 FPS, and Ultra 22 FPS. All of these are below the threshold for smooth gameplay.

Q: How does the GPU’s memory capacity affect performance?

A: The 8 GB of GDDR5 memory is a key factor. At 1080p, it is sufficient, but at higher resolutions, the demand for texture data and frame buffer space increases. The significant frame rate drops at 1440p and 4K likely indicate that the 8 GB capacity and 256.3 GB/s bandwidth are being saturated.

Q: What is the best setting to maximize frame rate for a high-refresh monitor?

A: At 1080p, the Low preset delivers a 125 FPS average, which is the highest measured. This would be the choice for pushing frame rates to their maximum potential. Medium at 101 FPS is also a strong option if you want better visuals with still very high performance.

Q: Is the CPU holding back the GPU in this game?

A: At lower resolutions and settings, the GPU is the primary bottleneck. The benchmark results show that at 1080p Low, the frame rate is very high (125 FPS), suggesting the CPU can feed the GPU effectively. However, at higher resolutions and settings, the GPU’s performance limits the overall frame rate, so the CPU is not the limiting factor in those scenarios.

Measured FPS Breakdown

The complete set of measured frame rates reveals a predictable pattern of performance scaling.

At 1920x1080:

  • Ultra averages 59 FPS.
  • High averages 78 FPS.
  • Medium averages 101 FPS, with a minimum of 86 FPS and a maximum of 116 FPS.
  • Low averages 125 FPS.

The gap between Ultra and High is 19 FPS, while the gap between High and Medium is 23 FPS. The jump from Medium to Low is 24 FPS. This shows that each step down in settings yields a significant performance increase, with the most playable results starting at Medium.

At 2560x1440:

  • Ultra averages 39 FPS.
  • High averages 51 FPS.
  • Medium averages 66 FPS, with a minimum of 57 FPS and a maximum of 76 FPS.
  • Low averages 82 FPS.

Compared to 1080p, the frame rate at each setting drops by roughly 35-50%. The Medium preset remains the sweet spot for a playable experience, staying above 60 FPS on average.

At 3840x2160:

  • Ultra averages 22 FPS.
  • High averages 28 FPS.
  • Medium averages 37 FPS, with a minimum of 31 FPS and a maximum of 42 FPS.
  • Low averages 46 FPS.

The 4K results are uniformly poor, with even the lowest preset failing to reach 50 FPS. The medium preset’s minimum of 31 FPS confirms that stutter and lag will be noticeable. The data clearly shows that 4K is not a viable resolution for this hardware combination in Palworld.

How This Combo Ranks

In the database of tested hardware combinations for Palworld, this pairing of the Intel Core Ultra 7 265 and NVIDIA GeForce GTX 1070 ranks 2437 out of 2944 total combinations. This places it in the lower percentile of tested systems, indicating that it is a below-average performer for this game. The ranking reflects the GTX 1070’s age and performance class, which is the primary limiting factor, rather than the CPU.

The CPU itself is a high-end part, ranking in the 93rd percentile among all processors. However, the GPU sits in the 47th percentile, and in a game like Palworld, the GPU’s performance is far more critical. The low overall combo rank is a direct result of this mismatch. The benchmark data shows that while the Ultra 7 265 has the headroom to push high frame rates, the GTX 1070 cannot deliver them, especially at higher resolutions.

For context, the CPU’s nearest rivals in synthetic benchmarks include the AMD EPYC 4464P and the Intel Core Ultra 7 265F, with performance deltas of -0.3% and +0.3% respectively. This indicates that the CPU is a very capable part. The GPU, however, is in a different league, with its nearest rivals being workstation or older parts like the AMD FirePro W5000 and NVIDIA Quadro M2000M. This data reinforces that the GTX 1070 is the bottleneck, and any upgrade path would focus on replacing the GPU to improve the combo’s ranking.

CPU Role

The Intel Core Ultra 7 265 provides a strong foundation for this system. With 20 cores and 20 threads, it is a modern, high-core-count processor. The architecture is Arrow Lake, built on a 3 nm process by TSMC. Its performance in synthetic benchmarks is impressive, with a Cinebench R23 multi-core score of 42216 and a single-core score of 5960. This raw processing power ensures that the CPU is not a limiting factor in Palworld’s gameplay, which is more dependent on GPU throughput.

The CPU’s role in this specific combination is to feed the GPU with draw calls and game logic data. Its high single-thread performance, evidenced by the 5960 score in Cinebench R23 single-core, is beneficial for a game like Palworld that relies on a single main thread for many simulation tasks. The benchmark results in-game show that at 1080p Low, the system achieves 125 FPS, which is a high number, suggesting the CPU can handle the game’s engine efficiently when not constrained by the GPU.

However, the CPU’s potential is largely untapped in this pairing. The GTX 1070 becomes the bottleneck at higher resolutions and settings, meaning the Ultra 7 265’s additional cores and threads do not translate to higher frame rates in Palworld. The CPU’s 30 MB of shared L3 cache and 102.4 GB/s memory bandwidth provide a fast pipeline for data, but this only matters if the GPU can process the frames. In essence, the CPU has ample headroom, and its presence in this combo ensures that frame rate drops are purely due to GPU limitations, not CPU stalls. The benchmark data confirms this: the frame rates scale inversely with resolution and graphical load, which is a signature of a GPU-bound scenario. The CPU is ready for a much more powerful GPU, but with the GTX 1070, its capabilities are held back.

Hardware Specifications

Intel Core Ultra 7 265

Cores / Threads 20 / 20
Base Clock 2400 MHz
Boost Clock 5300 MHz
TDP 65W
Socket Intel Socket 1851
View Full CPU Details →

NVIDIA GeForce GTX 1070

VRAM 8 GB GDDR5
Base Clock —
Boost Clock 1683 MHz MHz
TDP 150 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra 7 265 + NVIDIA GeForce GTX 1070 in Palworld

Resolution Settings Avg FPS
3840x2160 Low 46.0
3840x2160 Medium 37.0
3840x2160 High 28.0
3840x2160 Ultra 22.0
2560x1440 Low 82.0
2560x1440 Medium 66.0
2560x1440 High 51.0
2560x1440 Ultra 39.0
1920x1080 Low 125.0
1920x1080 Medium 101.0
1920x1080 High 78.0
1920x1080 Ultra 59.0

Palworld with GTX 1070 + Other CPUs

See how Palworld performs with the same GPU but different processors.

Other Games with iUltra 7 265 + GTX 1070

Explore FPS benchmarks for other games using this same hardware combination.