Palworld

Palworld with the Intel Core Ultra 5 225 and NVIDIA GeForce RTX 3070 combination ranks 1222nd out of 2944 tested combos in this game. That places it in the 58th percentile of all tested configurations, meaning it outperforms a majority of systems while still leaving headroom above it. The ranking reflects a pairing where neither component is the absolute top-tier for this title, but the combination lands in a solidly above-average position. For a survival game that can be demanding on both CPU and GPU depending on the scene, this mid-pack-to-upper-mid placement suggests a balanced system capable of handling the game's core loops without being a benchmark leader.

How This Combo Ranks

The comboRankInGame of 1222 out of 2944 combos places this system in the upper half of all tested configurations for Palworld. The RTX 3070, sitting at the 61st percentile among all GPUs, pairs with a CPU at the 85th percentile among all processors, creating a system where the processor is relatively stronger than the graphics card. This imbalance matters in Palworld because the game's open-world survival mechanics — with many entities, building structures, and physics interactions — can shift load between components. The data shows the combo outperforms 58% of tested systems, which is respectable but not exceptional.

The CPU's nearest rivals in synthetic benchmarks include the AMD Ryzen 5 5600F with a deltaPct of 0 and the AMD Ryzen 5 5500X3D at -0.2 percent. The Core Ultra 5 225 essentially trades blows with these chips, scoring 36938 on average compared to 36945 for the 5600F and 37018 for the 5500X3D. This near-tie in raw compute means the CPU is not a differentiator in ranking; the GPU likely determines most of the variance between combos. With the RTX 3070's average benchmark score of 17208 and its nearest rival, the AMD Radeon RX 7600 XT, at 17083 (a 0.7 percent delta), the graphics card also sits in a tight competitive cluster. The ranking of 1222 reflects this mid-pack hardware positioning rather than any single component dragging the system down.

GPU Role

The RTX 3070 brings 8 GB of GDDR6 memory on a 256-bit bus, delivering 448.0 GB/s of bandwidth. The memory clock runs at 1750 MHz with 14 Gbps effective speed, while the GPU core has a base clock of 1500 MHz and a boost clock of 1725 MHz. These specifications place the card in a capable but not top-tier position for Palworld, which is further confirmed by its 61st percentile ranking among all GPUs. The 8 GB VRAM capacity is a notable factor — Palworld's open world with many texture-rich environments can push memory usage, and the measured FPS data suggests the card handles the game's demands without hitting a hard VRAM wall at the tested settings.

The GPU's compute resources include 5888 shading units, 184 texture mapping units, and 96 raster operation units, along with 46 ray tracing cores and 184 tensor cores. The FP32 performance of 20.31 TFLOPS provides the raw arithmetic throughput needed for the game's rendering, while the 165.6 GPixel/s pixel rate and 317.4 GTexel/s texture rate indicate how quickly the card can fill the screen. In Palworld, these figures translate to smooth frame pacing in most scenarios, but the 4K results show the card's limits. At 4K Ultra settings, the average FPS drops to 35, which is below the playable threshold for most users. The card's 61st percentile GPU ranking aligns with this behavior — it is a solid 1440p performer but struggles at 4K with maximum settings.

Resolution Scaling

The measured FPS data reveals a clear pattern of performance scaling across resolutions. At 1080p Low settings, the system achieves 204 average FPS, which drops to 134 at 1440p Low (a 34 percent reduction) and further to 75 at 4K Low (a 63 percent reduction from 1080p). This scaling shows that at low settings, the GPU becomes the limiting factor as resolution increases, but the CPU still has enough headroom to push high frame rates at 1080p. The 1080p Low result of 204 FPS suggests the CPU can feed the GPU quickly, but the GPU's workload grows disproportionately with pixel count.

Looking at Medium settings, the pattern continues: 165 FPS at 1080p, 109 FPS at 1440p, and 60 FPS at 4K. The drop from 1080p to 1440p is 34 percent, while from 1440p to 4K it is 45 percent. This non-linear scaling indicates that the RTX 3070's memory bandwidth and compute capacity become increasingly strained at higher resolutions. At High settings, the numbers are 127 FPS at 1080p, 84 FPS at 1440p, and 46 FPS at 4K — the 4K result is only 36 percent of the 1080p figure. Ultra settings show the most dramatic falloff: 97 FPS at 1080p, 64 FPS at 1440p, and 35 FPS at 4K. The data clearly shows that 4K Ultra is not viable, while 1080p and 1440p offer playable to excellent frame rates across all settings.

Settings Recommendations

The measured rows provide a clear picture of which preset delivers the best experience. At 1920x1080, the Medium preset hits 165 average FPS with a minimum of 141 and maximum of 190 FPS. This is a smooth, high-refresh-rate experience that keeps frame times consistent. High settings at 1080p drop to 127 FPS, which is still excellent for most displays, but the 38 FPS gap between Medium and High represents a significant visual upgrade for only a modest frame rate cost. Ultra at 1080p gives 97 FPS, which is playable but noticeably lower than the 60 FPS minimum that many players target for consistency.

Moving to 2560x1440, Medium settings provide 109 average FPS with a minimum of 93 and maximum of 125 FPS. This is the sweet spot for this resolution — the frame rate stays above 90 FPS even in demanding moments, and the visual quality is strong. High at 1440p drops to 84 FPS, which is still smooth on a 60 Hz monitor but less ideal for high-refresh displays. At 4K, the only setting that approaches playability is Low with 75 FPS, but Medium drops to 60 FPS with a minimum of 51 — borderline for consistent gameplay. The recommendation from the data is clear: 1080p Medium or High, or 1440p Medium, offer the best balance of frame rate and visual fidelity.

Measured FPS Breakdown

At 1920x1080, the system delivers 204 FPS on Low, 165 FPS on Medium (min 141, max 190), 127 FPS on High, and 97 FPS on Ultra. The gap between Low and Ultra is 107 FPS, showing the full range of GPU workload scaling. The Medium preset's minimum of 141 FPS indicates that even in heavy scenes, the frame rate stays well above the 60 FPS threshold, making this a reliable choice for competitive or fast-paced play.

At 2560x1440, the results are 134 FPS on Low, 109 FPS on Medium (min 93, max 125), 84 FPS on High, and 64 FPS on Ultra. The Medium preset's minimum of 93 FPS is notable — it stays above 90 FPS in all measured scenarios, which is excellent for a 1440p experience. High settings at 84 FPS are still smooth, but the 25 FPS drop from Medium to High suggests that the GPU is working harder without proportionally better visuals. Ultra at 64 FPS is the first setting where the frame rate dips below the 60 FPS comfort zone in some scenes.

At 3840x2160, the numbers fall sharply: 75 FPS on Low, 60 FPS on Medium (min 51, max 69), 46 FPS on High, and 35 FPS on Ultra. The Medium preset's minimum of 51 FPS shows that even the mid-range setting can drop below 60 FPS in demanding moments. Low settings at 75 FPS are the only 4K option that maintains a comfortable margin above 60 FPS. The Ultra preset at 35 FPS is effectively unplayable for most users, confirming that this combo's 4K capabilities are limited to lower presets.

FAQ

Q: Can this combo run Palworld at 1080p with high settings?

A: Yes. The measured data shows 127 average FPS at 1920x1080 High settings, which is well above the 60 FPS target for smooth gameplay.

Q: What is the best setting for 1440p gaming?

A: Medium settings at 2560x1440 provide 109 average FPS with a minimum of 93 FPS, offering the best combination of visual quality and frame rate stability.

Q: Is 4K gaming viable with this hardware?

A: Only at Low settings, where the system achieves 75 FPS at 3840x2160. Medium drops to 60 FPS with a minimum of 51, while High and Ultra fall to 46 and 35 FPS respectively.

Q: How does the CPU compare to its closest rivals?

A: The Intel Core Ultra 5 225 scores 36938 in average benchmarks, matching the AMD Ryzen 5 5600F (36945) and slightly trailing the AMD Ryzen 5 5500X3D (37018) by 0.2 percent.

Q: How does the GPU compare to its nearest competitor?

A: The RTX 3070 scores 17208 in average benchmarks, which is 0.7 percent ahead of the AMD Radeon RX 7600 XT's 17083 score.

Q: What frame rates can I expect at 1080p Ultra?

A: The measured average is 97 FPS at 1920x1080 Ultra settings, which is playable but notably lower than the 165 FPS seen at Medium settings.

CPU Role

The Intel Core Ultra 5 225 is a 10-core, 10-thread processor based on the Arrow Lake architecture, built on a 3 nm process at TSMC. Its base clock is 3.30 GHz with a boost clock of 4.90 GHz, and it carries 20 MB of shared L3 cache plus 3 MB of L2 cache per core. The CPU's 85th percentile ranking among all processors indicates strong performance, with its nearest rival being the AMD Ryzen 5 5600F at a 0 percent delta. This processor's single-thread score of 3655 in Cinebench R23 and multicore score of 25891 show balanced capability for both the game's simulation threads and rendering tasks.

In Palworld, the CPU's role is significant because the game involves complex world simulation, pathfinding for creatures, and physics interactions. The measured FPS data at 1080p Low (204 FPS) suggests the CPU can feed the GPU at very high frame rates, but the drop to 134 FPS at 1440p Low indicates the GPU begins to bottleneck. The CPU's 10 cores and 10 threads — with no hyperthreading — mean it relies on high clock speeds (up to 4.90 GHz boost) for single-threaded tasks, which is typical for game logic. The Passmark multithread score of 30459 and single-thread score of 4412 place this chip in a competitive position for gaming workloads. The 20 MB L3 cache helps with data locality in open-world games, where entities and world state are frequently accessed. Overall, the CPU provides a solid foundation that does not bottleneck the RTX 3070 in Palworld until frame rates exceed 200 FPS, which only occurs at 1080p Low settings.