Palworld

Palworld

AVERAGE FPS
93
good

This combination provides smooth gameplay with an average of 93 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 35 42 55 68
1440p QHD 60 79 103 129
1080p Full HD 89 120 153 189

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 68
3840x2160 Medium 55
3840x2160 High 42
3840x2160 Ultra 35
2560x1440 Low 129
2560x1440 Medium 103
2560x1440 High 79
2560x1440 Ultra 60
1920x1080 Low 189
1920x1080 Medium 153
1920x1080 High 120
1920x1080 Ultra 89

Palworld with Intel Core i9-14900K + AMD Radeon RX 6750 XT, In-Depth Analysis

Palworld, a survival title built on Unreal Engine, presents a demanding workload that stresses both the CPU and GPU. The pairing of the Intel Core i9-14900K with the AMD Radeon RX 6750 XT produces a wide spread of frame rates, heavily influenced by the chosen resolution. The measured data shows a system capable of high refresh rate play at 1080p, but one that is firmly limited by the graphics card as pixel count increases. The benchmark results reveal a clear scaling pattern that can guide users toward the optimal settings for their display.

Resolution Scaling

The frame rate progression from 1920x1080 to 3840x2160 is stark, revealing how the system’s bottleneck shifts with resolution. At 1080p with Low settings, the combo achieves 188.7 FPS, a figure that drops by roughly a third to 128.9 FPS at 1440p, and then halves again to 67.7 FPS at 4K. This steep decline suggests that at lower resolutions, the processor is doing the heavy lifting, feeding frames to the GPU as fast as it can. However, the GPU quickly becomes the limiting factor as the resolution climbs.

The data implies a classic GPU-bound scenario at higher resolutions. Moving from 1440p to 4K at High settings, the average frame rate falls from 79.3 FPS to 42.1 FPS, a reduction of nearly 47%. This is a substantial drop, indicating that the Radeon RX 6750 XT’s rendering pipeline is being saturated by the sheer number of pixels. The 12 GB frame buffer and 432.0 GB/s of memory bandwidth are sufficient, but the chip's raw compute power is what holds it back at 4K.

At 1080p, the story is different. The gap between Low (188.7 FPS) and Ultra (88.7 FPS) is massive, showing that the CPU has headroom to push very high frame rates when graphical load is low. The i9-14900K’s 24 cores and 32 threads, with a boost clock of 6.00 GHz, are clearly not the primary constraint here. The data suggests that for competitive or high-refresh-rate play, 1080p is the sweet spot, while 4K gaming would require a more powerful GPU to achieve smooth, consistent performance.

FAQ

Q: What is the performance difference between Low and Ultra settings at 1920x1080?

A: The measured average frame rate drops from 188.7 FPS on Low to 88.7 FPS on Ultra, a reduction of 100 FPS. This shows that Ultra settings impose a significant load on the GPU even at 1080p.

Q: Is the Radeon RX 6750 XT capable of 4K gaming in Palworld?

A: Yes, but with caveats. At 4K with Medium settings, the combo averages 54.9 FPS. On High settings, this drops to 42.1 FPS, and on Ultra, it falls to 34.5 FPS. The game is playable, but users may need to lower settings to achieve a stable 60 FPS.

Q: How does the CPU’s benchmark score compare to its closest rivals?

A: The Intel Core i9-14900K has an average benchmark score of 79824, which is 0.7% higher than the Intel Core i9-14900KF and 0.9% higher than the Intel Core Ultra 7 265K. It sits just 0.3% below the AMD EPYC 7413's score of 80041.

Q: What is the GPU's memory configuration and how might it affect performance?

A: The GPU features 12 GB of GDDR6 memory on a 192-bit bus, providing a bandwidth of 432.0 GB/s. For Palworld, this appears adequate, as the performance scaling is more dependent on resolution than on memory capacity.

Q: Where does this specific CPU and GPU combination rank among all tested combos in Palworld?

A: This pairing ranks 842 out of 1718 total tested combinations, placing it in the middle of the pack. This indicates that while it is a capable setup, there are many other combinations that achieve higher frame rates.

Q: What is the frame rate at 1440p with High settings?

A: The measured average frame rate is 79.3 FPS. This is a strong result, suggesting that 1440p with High settings is a viable option for a smooth experience on this hardware.

How This Combo Ranks

In the Palworld benchmark database, this configuration of the Intel Core i9-14900K and AMD Radeon RX 6750 XT achieves a rank of 842 out of 1718 tested combos. This places it squarely in the 49th percentile, meaning that roughly half of the tested systems perform better and half perform worse. The data suggests this is a balanced, mid-tier setup for this particular game, not an outlier on either end of the performance spectrum.

The ranking is likely influenced more by the GPU than the CPU. The i9-14900K is a top-tier processor, ranking in the 97th percentile against all CPUs, with an average benchmark score of 79824. In contrast, the RX 6750 XT ranks in the 79th percentile against all GPUs, with an average score of 35327. The GPU's relatively lower standing, compared to the CPU, means that it is the component that likely drags the combo down from a higher overall rank. The combo rank reflects the weakest link in the chain.

This mid-pack placement is consistent with the measured FPS data. While the combo can produce very high frame rates at 1080p, its performance at 4K is more modest. The rank is a holistic view of performance across all settings and resolutions, and the 4K results pull the average down. It is a reminder that a flagship CPU cannot fully compensate for a mid-range GPU in a graphically intensive title like Palworld.

Measured FPS Breakdown

The measured data provides a clear picture of performance across three resolutions and four quality presets. At 1920x1080, the system delivers excellent results, with an average of 188.7 FPS on Low, 153.1 FPS on Medium, 119.7 FPS on High, and 88.7 FPS on Ultra. These numbers indicate a system that can easily handle high refresh rate monitors at this resolution, even with maxed-out settings.

Moving to 2560x1440, the frame rates remain very playable. The average FPS is 128.9 on Low, 103.2 on Medium, 79.3 on High, and 60.0 on Ultra. The data shows a linear scaling curve, with each preset drop yielding a roughly 20-25 FPS increase. This suggests that users with 1440p monitors have a wide range of options, from competitive play on Low to a visually rich experience on High.

At 3840x2160, the GPU becomes the clear limiting factor. The average FPS drops to 67.7 on Low, 54.9 on Medium, 42.1 on High, and 34.5 on Ultra. The drop from Low to Medium is 12.8 FPS, and the drop from Medium to High is another 12.8 FPS. The performance is playable on Low and Medium, but users will struggle to maintain a consistent 60 FPS on higher presets. The data shows that 4K gaming requires significant compromises in visual quality for this GPU.

GPU Role

The AMD Radeon RX 6750 XT is the primary determinant of performance in Palworld, especially at higher resolutions. Its 12 GB of GDDR6 memory and 432.0 GB/s of bandwidth are sufficient for the game's assets at 1440p and even 4K, but the processing power is what limits frame rates. The boost clock of 2600 MHz and the game clock of 2495 MHz on the RDNA 2.0 architecture provide a solid foundation, but the 13.31 TFLOPS of FP32 compute is outmatched by the demands of 4K.

The GPU's performance percentile of 79 versus all GPUs, with an average score of 35327, places it near the NVIDIA GeForce RTX 3080, which has a score of 35787 (a 1.3% difference). This context is useful, as it indicates the RX 6750 XT is a capable 1440p card that can handle 1080p with ease. The data shows that its role in this combo is to provide a smooth experience at 1080p and 1440p, but it is not a 4K powerhouse.

At 1080p, the GPU's limitations are less apparent, as the frame rates are high across all settings. However, the scaling from Low to Ultra (a 100 FPS difference) shows that the GPU is still the bottleneck when settings are increased. The data implies that the GPU's memory and bandwidth are not the issue; instead, it is the raw shader and texture processing power that determines the final frame rate.

CPU Role

The Intel Core i9-14900K plays a supporting role in this configuration, providing a massive amount of processing power that ensures the GPU is never starved for data. With 24 cores and 32 threads, and a boost clock of 6.00 GHz, this processor is a top-tier performer, ranking in the 97th percentile of all CPUs. Its average benchmark score of 79824 is 0.7% higher than the Intel Core i9-14900KF and 0.7% lower than the AMD EPYC 7413.

In Palworld, the CPU's role is to handle game logic, physics, and draw calls. The data shows that at 1080p with Low settings, the system reaches 188.7 FPS, which reflects the CPU's ability to feed the GPU. If the CPU were weak, this number would be significantly lower. The fact that the frame rate drops so drastically when resolution increases indicates that the CPU is not the bottleneck in this scenario.

The CPU's large L3 cache of 36 MB (shared) and high single-core performance are beneficial for a game like Palworld, which may have demanding simulation elements. The benchmark results show that the i9-14900K is more than capable of keeping up with the RX 6750 XT, even at high frame rates. The data suggests that the CPU is not a limiting factor in this combo, and its performance headroom could support a more powerful GPU in the future.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend heavily on the user's display resolution and performance targets. For 1920x1080, the Ultra preset provides an average of 88.7 FPS, which is a high level of performance for a visually demanding game. The High preset at 119.7 FPS is also an excellent choice for those who prioritize frame rate over maximum visual fidelity. The data shows that even the Ultra preset is very playable at this resolution.

For 2560x1440, the High preset is the recommended choice, offering an average of 79.3 FPS. This provides a good balance between visual quality and smoothness. The Ultra preset at 60.0 FPS is also viable for users who prefer maximum quality, but it offers less headroom for demanding scenes. The Medium preset at 103.2 FPS is a better option for competitive play, ensuring a high and consistent frame rate.

At 3840x2160, users will need to make significant compromises. The Low preset delivers 67.7 FPS, which is the only preset that comes close to a 60 FPS experience. The Medium preset at 54.9 FPS is a reasonable alternative for those who want better visuals without dropping below 50 FPS. The data shows that the High and Ultra presets are not recommended for 4K, as they fall below 43 FPS, which can feel stuttery in a fast-paced survival game. The best experience for 4K is achieved by using the Low or Medium preset.

Hardware Specifications

Intel Core i9-14900K

Cores / Threads 24 / 32
Base Clock 3200 MHz
Boost Clock 6000 MHz
TDP 125W
Socket Intel Socket 1700
View Full CPU Details →

AMD Radeon RX 6750 XT

VRAM 12 GB GDDR6
Base Clock —
Boost Clock 2600 MHz MHz
TDP 250 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i9-14900K + AMD Radeon RX 6750 XT in Palworld

Resolution Settings Avg FPS
3840x2160 Low 67.7
3840x2160 Medium 54.9
3840x2160 High 42.1
3840x2160 Ultra 34.5
2560x1440 Low 128.9
2560x1440 Medium 103.2
2560x1440 High 79.3
2560x1440 Ultra 60.0
1920x1080 Low 188.7
1920x1080 Medium 153.1
1920x1080 High 119.7
1920x1080 Ultra 88.7

Palworld with ii9-14900K + Other GPUs

See how Palworld performs with the same CPU but different graphics cards.

Palworld with RX 6750 XT + Other CPUs

See how Palworld performs with the same GPU but different processors.

Other Games with ii9-14900K + RX 6750 XT

Explore FPS benchmarks for other games using this same hardware combination.