Palworld

The Intel Core i7-14700KF paired with the NVIDIA GeForce RTX 2060 achieves a combo rank of 2942 out of 3711 tested combinations in Palworld. This places the pairing in the lower third of all tested systems, indicating that while the CPU is a high-end part, the overall gaming experience is constrained by the GPU. The data shows that this configuration is not optimized for high-refresh-rate or high-resolution play, but it does provide a stable baseline for 1080p gaming at medium settings.

How This Combo Ranks

The combo’s rank of 2942 out of 3711 tested combos places it in the 21st percentile of all systems tested for Palworld. This is a low ranking, driven almost entirely by the GPU’s position. The RTX 2060 holds a percentile of 58 against all GPUs, but in this specific game, its performance is further limited. The CPU, by contrast, is a top-tier part; the i7-14700KF has a percentile of 94 against all CPUs and an average benchmark score of 70163. This discrepancy highlights a significant bottleneck.

The nearest GPU rivals in synthetic benchmarks are the NVIDIA GeForce GTX 580 (deltaPct 0), AMD Radeon 680M (deltaPct 0.1), NVIDIA GeForce RTX 3050 OEM (deltaPct 0.6), and AMD Radeon RX 7600 (deltaPct 0.8). All are within 1% of the RTX 2060’s average score of 15290, confirming that the GPU is a mid-range part that has been surpassed by newer entries. The CPU, however, sits comfortably above its rivals, with the AMD Ryzen 7 9700F being only 0.2% slower, and the Intel Core Ultra 7 265K being 1% faster. This creates a situation where the CPU is overqualified for the GPU’s output, leading to the low overall combo rank.

Benchmark results indicate that the CPU’s multi-threaded strength, evidenced by a Cinebench R23 multicore score of 44167, is not being utilized effectively in Palworld because the GPU cannot keep up. The measured FPS data confirms this, as the system fails to hit 60 FPS at 1440p on high settings, let alone 4K. The rank is a reflection of the entire system’s balance, and this pairing is heavily skewed towards the CPU.

GPU Role

The NVIDIA GeForce RTX 2060 is built on the Turing architecture and features 6 GB of GDDR6 memory on a 192-bit bus, providing 336.0 GB/s of bandwidth. Its base clock is 1365 MHz with a boost clock of 1680 MHz. The card has 1920 shading units, 120 texture mapping units, and 48 raster output units. It also includes 30 RT cores and 240 tensor cores, though these are not heavily leveraged in Palworld. The GPU’s FP32 performance is 6.451 TFLOPS, and its pixel rate is 80.64 GPixel/s, with a texture rate of 201.6 GTexel/s.

In Palworld, the RTX 2060’s 6 GB VRAM is a limiting factor. The data shows that at 4K Ultra settings, the average FPS drops to 24, which is unplayable. Even at 1080p Ultra, the average FPS is only 65, indicating that the GPU’s compute and memory bandwidth are insufficient for the game’s highest settings. The card’s 336.0 GB/s bandwidth is a bottleneck at higher resolutions, where the demand for texture data increases significantly.

The GPU’s performance relative to its rivals is tight, with the AMD Radeon RX 7600 being just 0.8% faster in synthetic benchmarks. This suggests that the RTX 2060 is competitive with entry-level modern cards, but it lacks the headroom needed for Palworld’s demanding environments. The measured FPS at 1080p Low (138 FPS) shows that the card can push high frame rates when the load is light, but the performance drops off steeply as settings and resolution increase. This is a classic sign of a GPU that is running out of raw compute and memory bandwidth.

Resolution Scaling

The measured FPS data reveals a clear pattern of diminishing returns as resolution increases. At 1080p High, the average FPS is 86. Moving to 1440p High, the FPS drops to 57, a 33.7% decrease. At 4K High, the FPS falls to 32, which is a 62.8% drop from 1080p. This scaling is typical for a GPU-bound scenario, where the rendering load grows exponentially with pixel count.

The CPU’s role becomes less significant at higher resolutions, as the GPU becomes the primary limiter. At 1080p Low, the system achieves 138 FPS, suggesting that the CPU can handle high frame rates. However, the GPU’s performance at 4K Low (51 FPS) shows that even with minimal settings, the GPU is unable to maintain a smooth experience at that resolution. The data indicates that the RTX 2060 is a 1080p-centric card, with 1440p being a stretch and 4K being impractical except at low settings.

The drop from 1080p Low to 1080p Ultra is 52.9% (from 138 to 65 FPS), while the drop from 1440p Low to 1440p Ultra is 52.7% (from 91 to 43 FPS). This consistency suggests that the GPU’s performance scales predictably with settings, but the absolute numbers are too low for high-end play. At 4K, the drop from Low to Ultra is 52.9% (from 51 to 24 FPS), which is similar, but the starting point is already below the playable threshold.

Measured FPS Breakdown

At 1920x1080, the system shows its best performance. With Low settings, the average FPS is 138, which is very smooth. Medium settings yield 112 FPS, with minimum and maximum FPS of 95 and 129, respectively. High settings produce 86 FPS, and Ultra settings drop to 65 FPS. This indicates that 1080p is the sweet spot for this combo, with all settings except Ultra achieving over 60 FPS.

Moving to 2560x1440, the performance drops significantly. Low settings average 91 FPS, which is still playable. Medium settings produce 74 FPS, with a range of 63 to 85 FPS. High settings average 57 FPS, which is below the 60 FPS target. Ultra settings fall to 43 FPS, making the game feel sluggish. The data shows that 1440p is only viable on Low or Medium settings for a consistent experience.

At 3840x2160, the system struggles. Low settings average 51 FPS, which is borderline. Medium settings produce 41 FPS, with a range of 35 to 47 FPS. High settings drop to 32 FPS, and Ultra settings are unplayable at 24 FPS. The data confirms that 4K is not a realistic option for this pairing, even at the lowest settings.

CPU Role

The Intel Core i7-14700KF is a 20-core, 28-thread processor based on the Raptor Lake architecture. It has a base clock of 3.40 GHz and a boost clock of 5.60 GHz. The CPU features 80 KB of L1 cache per core, 2 MB of L2 cache per core, and 33 MB of shared L3 cache. It supports DDR4 and DDR5 memory and has a TDP of 125 W. The processor is a desktop part with an unlocked multiplier, making it suitable for overclocking.

In Palworld, the CPU’s role is to feed the GPU with draw calls and game logic. The benchmark results show that the i7-14700KF is a powerhouse, with a Passmark multithread score of 52425 and a Geekbench multicore score of 21462. Its single-thread performance is also strong, with a Cinebench R23 single-core score of 6235. These numbers suggest that the CPU is not the limiting factor in this combo.

The measured FPS at 1080p Low (138 FPS) indicates that the CPU can push frame rates well above 60 FPS. However, the GPU’s limitations cap the system’s performance. The CPU’s nearest rival, the AMD Ryzen 9 7950X, is only 0.9% slower in average benchmark score, showing that the i7-14700KF is at the top of the desktop heap. This makes the pairing with the RTX 2060 a mismatch, as the CPU is capable of supporting a much more powerful GPU.

FAQ

Q: What is the best resolution for this combo in Palworld?

A: The data shows that 1920x1080 is the best resolution, with all settings except Ultra achieving over 60 FPS on average (138 FPS on Low, 112 FPS on Medium, 86 FPS on High).

Q: Can this system handle 4K gaming in Palworld?

A: No. At 3840x2160, the average FPS ranges from 24 on Ultra to 51 on Low, which is below the 60 FPS target even at the lowest settings.

Q: How does the CPU compare to its rivals?

A: The Intel Core i7-14700KF has an average benchmark score of 70163, which is 0.2% higher than the AMD Ryzen 7 9700F and 0.9% higher than the AMD Ryzen 9 7950X. It is 1% slower than the Intel Core Ultra 7 265K.

Q: What is the GPU’s VRAM capacity and how does it affect performance?

A: The GPU has 6 GB of GDDR6 memory. The data suggests this is insufficient for high settings at 1440p and above, as the average FPS drops below 60 at 1440p High.

Q: Is the system CPU-bound or GPU-bound?

A: The system is GPU-bound. The CPU’s benchmark scores are in the 94th percentile, while the GPU’s are in the 58th. The FPS scaling with resolution confirms that the GPU is the limiting component.

Q: What is the average FPS at 1440p Medium settings?

A: The average FPS at 2560x1440 with Medium settings is 74, with a minimum of 63 and a maximum of 85.

Settings Recommendations

For this combo, the data suggests that 1080p Medium is the optimal balance of visual quality and performance. The average FPS of 112 with a minimum of 95 ensures a smooth experience without the need for Low settings. At 1080p High, the average FPS is 86, which is still playable, but the drop to 65 FPS on Ultra makes the highest preset less desirable.

If the user prefers 1440p, the only viable option is Low settings, which average 91 FPS. Medium settings at 1440p produce 74 FPS, which is acceptable, but the minimum of 63 FPS indicates potential stutters in demanding scenes. High and Ultra settings at 1440p should be avoided, as they fall below 60 FPS.

For 4K, no settings are recommended, as even Low settings average only 51 FPS, and Medium drops to 41 FPS. The system is not suited for 4K play in Palworld. The best experience per the measured rows is 1080p Medium, offering high frame rates with a reasonable visual quality trade-off. Users prioritizing frame rate over visuals can opt for 1080p Low to achieve 138 FPS, but the Medium preset provides a more balanced experience.