Palworld

Palworld

AVERAGE FPS
53
playable

This combination offers playable performance with an average of 53 FPS, though you may want to lower settings for smoother gameplay.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 19 26 34 40
1440p QHD 34 46 59 69
1080p Full HD 51 70 84 106

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 40
3840x2160 Medium 34
3840x2160 High 26
3840x2160 Ultra 19
2560x1440 Low 69
2560x1440 Medium 59
2560x1440 High 46
2560x1440 Ultra 34
1920x1080 Low 106
1920x1080 Medium 84
1920x1080 High 70
1920x1080 Ultra 51

Palworld with Intel Core i5-9400 + NVIDIA GeForce RTX 3050 4 GB, In-Depth Analysis

Palworld pairs the Intel Core i5-9400 with the NVIDIA GeForce RTX 3050 4 GB, and the benchmark data places this combination at rank 1557 out of 1718 tested combos for this game. That puts it in the bottom tenth of the field, which is a direct reflection of how demanding Palworld is on the GPU side, especially given the 4 GB VRAM limitation. The ranking is not a judgment of the CPU, which holds its own in synthetic tests, but rather a signal that this specific pairing will struggle to deliver high-refresh or high-resolution experiences without significant compromises.

How This Combo Ranks

The combo rank of 1557 out of 1718 is a sobering statistic. Benchmark results indicate that roughly 91% of tested combinations outperform this setup in Palworld, which is a survival title that pushes both the processor and the graphics card under load. The data shows that the i5-9400 itself is a mid-pack performer, sitting at the 50th percentile among all CPUs, with an average benchmark score of 2305. Its nearest rivals include the Intel Core i3-10305 at 2300 (0.2% slower), the Intel Core i3-1125G4 at 2299 (0.2% slower), and the Intel Core i7-8809G at 2319 (0.6% faster). This tells us the CPU is not the bottleneck in most scenarios; it is a competent six-core, six-thread part from the Coffee Lake era.

The weak link is unambiguously the GPU. The RTX 3050 4 GB is positioned at the 50th percentile among all GPUs, but its 4 GB memory capacity is a severe constraint for Palworld’s open-world environments, which stream textures and assets aggressively. The measured FPS data confirms this: at 1080p Ultra, the combo manages only 51 FPS, and at 1440p Ultra it drops to 33.5 FPS. The ranking reflects that this GPU is simply not built for the game’s higher presets, regardless of the CPU’s capability. For context, the i5-9400’s single-core performance in Cinebench R23 (1125) and multi-core (7969) is respectable, but those numbers do not translate into playable frame rates when the GPU runs out of memory bandwidth and capacity.

What this rank means in practice is that you are working with a combination that is entry-level for this specific title. The data does not support expectations of smooth 4K or high-refresh 1440p gameplay. Instead, the combo’s position in the database suggests it is best suited for 1080p gaming at lower presets, where the numbers are more favorable, as detailed in the measured FPS breakdown below.

FAQ

Q: Can this combo run Palworld at 4K resolution?

A: Technically yes, but not at playable frame rates. At 4K Ultra, the average FPS is 18.9, and at 4K High it is 26.3. Only at 4K Low does it reach 40.4 FPS, and even that may feel inconsistent for a survival game that benefits from smooth motion.

Q: What is the best resolution for this combo?

A: The data clearly favors 1920x1080. At 1080p Low, the combo achieves 106.3 FPS, and at 1080p Medium it hits 84.4 FPS. These are the only settings where the frame rates consistently exceed 60 FPS, making 1080p the practical ceiling for this hardware.

Q: How does the i5-9400 compare to its closest rivals?

A: The i5-9400 has an average benchmark score of 2305. It is 0.2% faster than the Intel Core i3-10305 (2300) and the Intel Core i3-1125G4 (2299), and 0.6% slower than the Intel Core i7-8809G (2319). This places it in a tightly contested mid-range segment.

Q: Does the CPU bottleneck the GPU at 1080p?

A: Benchmark results suggest the CPU is not the primary limiter. The i5-9400’s multi-core score of 7969 in Cinebench R23 is adequate for modern games. The FPS drops from 106.3 at 1080p Low to 51 at 1080p Ultra indicate that the GPU, with its 4 GB VRAM and 192.0 GB/s bandwidth, is the constraining factor.

Q: Is the RTX 3050 4 GB’s VRAM sufficient for Palworld?

A: The data indicates it is not sufficient for higher presets. The gap between 1080p Medium (84.4 FPS) and 1080p High (69.8 FPS) is 14.6 FPS, and the drop to Ultra (51 FPS) is another 18.8 FPS. These steep declines align with the GPU exhausting its 4 GB memory buffer, forcing texture swapping.

Q: What preset should be avoided entirely?

A: Ultra settings at any resolution above 1080p should be avoided. At 1440p Ultra, the average FPS is 33.5, and at 4K Ultra it falls to 18.9. These are not playable figures for a game that requires quick reactions to enemy attacks and environmental hazards.

GPU Role

The NVIDIA GeForce RTX 3050 4 GB is the decisive component in this combo’s Palworld performance. Its role is defined by its memory configuration: 4 GB of GDDR6 on a 128-bit bus, yielding 192.0 GB/s of bandwidth. The GPU’s base clock is 1545 MHz, boosting to 1740 MHz, with memory running at 1500 MHz (12 Gbps effective). These specs are modest by modern standards, and the 4 GB capacity is the key limitation in Palworld, which is known for large, persistent worlds with numerous dynamic objects.

The GPU’s other specifications — 2048 shading units, 64 TMUs, and 32 ROPs — are sufficient for raw compute, but the texture rate of 111.4 GTexel/s and pixel rate of 55.68 GPixel/s are not enough to maintain high frame rates at demanding presets. The 16 RT cores and 64 tensor cores are present, but ray tracing is not a practical option in this game given the performance headroom. The FP32 throughput of 7.127 TFLOPS is decent for rasterization, yet the 4 GB memory pool forces the driver to aggressively manage assets, which manifests in the significant FPS drops between Medium, High, and Ultra presets.

The GPU’s launch MSRP is 199 USD, but that figure does not influence the measured results. What matters is that the RTX 3050 4 GB operates at a 90 W TDP, which is low, but that efficiency does not compensate for the memory shortfall. In this pairing, the GPU is the bottleneck at every resolution above 1080p Low, and even at 1080p, the Ultra preset (51 FPS) shows the GPU struggling to keep up with the CPU’s ability to feed it frames. The i5-9400 can deliver data fast enough; the RTX 3050 4 GB simply cannot process it at higher quality settings.

Measured FPS Breakdown

The measured FPS data provides a clear picture of performance across resolutions and settings. At 1920x1080, the combo achieves its best results: Low preset averages 106.3 FPS, Medium averages 84.4 FPS, High averages 69.8 FPS, and Ultra averages 51 FPS. These numbers show a linear degradation as settings increase, with a 55.3 FPS difference between Low and Ultra. The 1080p figures are the only ones where the combo approaches or exceeds the 60 FPS threshold, specifically at Low and Medium presets.

Moving to 2560x1440, the performance drops significantly. Low preset averages 69.1 FPS, which is still playable, but Medium drops to 59.4 FPS, High falls to 45.6 FPS, and Ultra plummets to 33.5 FPS. The gap between 1080p Low and 1440p Low is 37.2 FPS, indicating that the resolution increase heavily taxes the GPU’s memory bandwidth. At 1440p, only the Low preset maintains an average above 60 FPS, and the High and Ultra presets are not recommended for competitive or reactive gameplay.

At 3840x2160, the results are marginal. Low preset averages 40.4 FPS, Medium averages 34.4 FPS, High averages 26.3 FPS, and Ultra averages 18.9 FPS. None of these are playable for a survival title where dodging and timing are critical. The data shows that 4K is effectively out of reach for this combo, as even the lowest settings cannot sustain a consistent 30 FPS in demanding scenes. The measured rows confirm that the RTX 3050 4 GB is the limiting factor, as the FPS scales proportionally with resolution and settings, with no evidence of a CPU bottleneck.

Resolution Scaling

The resolution scaling behavior reveals a GPU-bound system. From 1080p Low to 1440p Low, the average FPS drops from 106.3 to 69.1, a 35% reduction. From 1440p Low to 4K Low, it drops from 69.1 to 40.4, another 41.5% reduction. This pattern is consistent across all settings, indicating that the GPU’s 192.0 GB/s bandwidth and 4 GB memory are the primary constraints. The i5-9400’s performance does not degrade with resolution, as its workload remains constant; the bottleneck is the GPU rendering more pixels.

The 1080p to 1440p transition is particularly telling. At Medium settings, the FPS drops from 84.4 to 59.4, a 25 FPS loss. At High settings, it drops from 69.8 to 45.6, a 24.2 FPS loss. These nearly identical deltas suggest that the GPU is hitting a memory bandwidth ceiling rather than a compute limit. The 4K results reinforce this: the difference between 4K Low (40.4 FPS) and 4K High (26.3 FPS) is only 14.1 FPS, whereas at 1080p, the Low-to-High gap is 36.5 FPS. This compression at higher resolutions indicates that the GPU is so memory-starved that raising settings has diminishing returns on frame rate.

For the builder, this means that lowering resolution is the most effective way to improve performance. The data shows that dropping from 1440p to 1080p at the same preset yields an average FPS gain of roughly 30-40%. Conversely, raising settings at a fixed resolution yields smaller gains, as the GPU’s memory is already saturated. The limiting component is unambiguously the RTX 3050 4 GB; the i5-9400 has the headroom to support higher frame rates, but the GPU cannot deliver them.

Settings Recommendations

Based on the measured rows, the optimal experience for this combo is at 1920x1080 with the Medium preset, which averages 84.4 FPS. This setting provides a smooth frame rate that is well above the 60 FPS threshold, while still offering improved visual fidelity over Low. The Low preset at 1080p (106.3 FPS) is the best choice for competitive play or if you prioritize frame rate above all else, but Medium is the sweet spot for balancing visuals and responsiveness.

At 2560x1440, the only viable setting is Low, which averages 69.1 FPS. This is playable, but the visual quality is noticeably reduced. There is no reason to attempt Medium or High at this resolution, as the frame rates (59.4 and 45.6 FPS) are too inconsistent for a game where you need to react to Pals and environmental threats. The 4K resolution should be avoided entirely; even Low (40.4 FPS) is below the playable threshold for most users.

For the best overall experience, the data recommends staying at 1080p Medium. This preset yields an 84.4 FPS average, which is 15.4 FPS higher than 1080p High (69.8 FPS) and 33.4 FPS higher than 1080p Ultra (51 FPS). The jump from Medium to High costs 14.6 FPS, which is a significant loss for marginal visual gains. The Ultra preset is not recommended at any resolution, as it consistently delivers the lowest frame rates, including a 51 FPS average at 1080p that will feel choppy in busy areas. In summary, prioritize resolution over settings: 1080p Medium is the target, and only drop to Low if you need to push above 100 FPS.

Hardware Specifications

Intel Core i5-9400

Cores / Threads 6 / 6
Base Clock 2900 MHz
Boost Clock 4100 MHz
TDP 65W
Socket Intel Socket 1151
View Full CPU Details →

NVIDIA GeForce RTX 3050 4 GB

VRAM 4 GB GDDR6
Base Clock —
Boost Clock 1740 MHz MHz
TDP 90 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i5-9400 + NVIDIA GeForce RTX 3050 4 GB in Palworld

Resolution Settings Avg FPS
3840x2160 Low 40.4
3840x2160 Medium 34.4
3840x2160 High 26.3
3840x2160 Ultra 18.9
2560x1440 Low 69.1
2560x1440 Medium 59.4
2560x1440 High 45.6
2560x1440 Ultra 33.5
1920x1080 Low 106.3
1920x1080 Medium 84.4
1920x1080 High 69.8
1920x1080 Ultra 51.0

Other Games with ii5-9400 + RTX 3050 4 GB

Explore FPS benchmarks for other games using this same hardware combination.