Palworld

Palworld with the AMD Ryzen 7 9700X and NVIDIA GeForce RTX 2060 produces a split personality: the CPU is a modern powerhouse, while the GPU is an older mid-range part. The measured results show this pairing lands at rank 1426 out of 1718 tested combos, placing it in the lower-middle portion of the database. This is a pairing where the processor has far more headroom than the graphics card can exploit, especially at higher resolutions.

FAQ

Q: What is the best resolution for this combo in Palworld?

A: The data shows 1920x1080 is the only resolution where this combo consistently delivers high frame rates. At 1080p Low, it hits 139.8 FPS, and even Ultra manages 63.6 FPS. At 2560x1440, the average drops to 57.4 FPS on High, while 3840x2160 falls below playable levels on every preset except Low.

Q: Can this combo handle 4K gaming in Palworld?

A: Not comfortably. At 3840x2160, the best result is 50.4 FPS on Low settings. Medium drops to 41.1 FPS, High falls to 29.3 FPS, and Ultra bottoms out at 23.5 FPS. Only the Low preset approaches a playable experience, and even that is marginal for a survival game.

Q: How does the RTX 2060 compare to its closest rivals?

A: The RTX 2060 scores 16074 in average benchmark score, sitting at the 58th percentile of all GPUs. It is 0.5% ahead of the AMD Radeon RX 7600S and 1.8% ahead of the AMD Radeon Pro W5500. It trails the AMD Radeon Pro 5600M and AMD Radeon Pro 5700 by 1.7%.

Q: Is the Ryzen 7 9700X a bottleneck for the RTX 2060?

A: The benchmark data suggests the CPU is not the limiting factor. The Ryzen 7 9700X scores 36029 on average, ranking in the 89th percentile of all CPUs. Its nearest rival, the Intel Core i5-14500HX, scores 35940 (0.2% slower). The CPU’s 8 cores and 16 threads are far ahead of what the GPU needs in this game.

Q: What is the difference between Low and Ultra settings at 1080p?

A: The jump is substantial. At 1920x1080, Low produces 139.8 FPS, while Ultra produces 63.6 FPS. That is a drop of over half the frame rate when moving from the lowest to the highest preset. Medium sits between them at 110.4 FPS, and High lands at 88.6 FPS.

Q: How does the combo rank overall in Palworld?

A: This specific CPU-GPU combination ranks 1426 out of 1718 tested combos for Palworld. That places it in the bottom 20 percent of all tested pairings, which aligns with the GPU’s mid-range status in a game that appears to favor stronger graphics hardware.

GPU Role

The NVIDIA GeForce RTX 2060 is built on the Turing architecture with a TU106 chip, featuring 1920 shading units, 120 TMUs, and 48 ROPs. Its memory configuration consists of 6 GB of GDDR6 on a 192-bit bus, delivering 336.0 GB/s of bandwidth. The GPU’s boost clock is 1680 MHz, with a base clock of 1365 MHz. For Palworld, this memory bandwidth and capacity become the primary constraints at higher resolutions.

The GPU produces 6.451 TFLOPS of FP32 performance and has a texture rate of 201.6 GTexel/s. In the benchmark database, it scores 14111 in PassMark G3D and 1242 in 3DMark Steel Nomad DX12. Its average benchmark score is 16074, placing it at the 58th percentile of all GPUs. This is a part that was designed for 1080p gaming, and the Palworld results confirm that.

At 1920x1080, the RTX 2060 delivers playable frame rates across all settings, from 139.8 FPS on Low to 63.6 FPS on Ultra. The 6 GB VRAM buffer appears sufficient at this resolution, as the game does not show signs of severe frame rate collapse. Moving to 2560x1440, the GPU begins to struggle: High settings produce 57.4 FPS, and Ultra drops to 44.9 FPS. At 3840x2160, the results are disappointing, with only Low settings (50.4 FPS) approaching playability.

The GPU’s 30 RT cores and 240 tensor cores exist on paper, but Palworld’s measured data does not suggest these features are heavily utilized. The game’s performance scaling across resolutions points to raw rasterization power and memory bandwidth as the limiting factors. The RTX 2060’s 336.0 GB/s bandwidth is decent for its era, but it is not enough to feed the pixel throughput required at 4K.

CPU Role

The AMD Ryzen 7 9700X is a Zen 5 part from the Granite Ridge family, fabricated on TSMC’s 4 nm process. It has 8 cores and 16 threads, with a base clock of 3.80 GHz and a boost clock of 5.50 GHz. The processor includes 32 MB of shared L3 cache, plus 1 MB of L2 per core and 80 KB of L1 per core. This configuration delivers exceptional single-threaded performance, scoring 4459 in Cinebench R23 single-core and 3353 in Geekbench single-core.

In multi-threaded workloads, the 9700X scores 31588 in Cinebench R23 multicore and 17002 in Geekbench multicore. Its average benchmark score is 36029, placing it at the 89th percentile of all CPUs. The nearest rival, the Intel Core i5-14500HX, scores 35940, which is 0.2% slower. The Intel Core Ultra 9 185H is 0.4% faster at 36165, and the AMD Ryzen 7 PRO 5845 is 0.6% slower at 35802.

For Palworld specifically, the CPU’s 5.50 GHz boost clock and strong single-core performance ensure that the processor is never the bottleneck in the measured scenarios. The game’s frame rates scale more directly with GPU settings and resolution than with CPU load. At 1080p Low, the CPU can push 139.8 FPS, but at 4K Ultra, the same CPU is waiting on the GPU to produce just 23.5 FPS.

The 65 W TDP and DDR5 memory support (dual-channel, 89.6 GB/s bandwidth) round out a platform that is future-proof for CPU-bound tasks. However, in this pairing, the CPU’s capabilities are largely unused headroom. The data indicates that the Ryzen 7 9700X would pair better with a more powerful GPU for Palworld, as the current bottleneck is clearly on the graphics side.

How This Combo Ranks

This combination of the AMD Ryzen 7 9700X and NVIDIA GeForce RTX 2060 ranks 1426 out of 1718 tested combos in Palworld. That places it in the bottom 17 percent of all pairings. The ranking reflects the GPU’s limitations rather than any CPU deficiency, as the 9700X is a top-tier processor by percentile.

The CPU and GPU sit at different performance tiers. The Ryzen 7 9700X is in the 89th percentile of all CPUs, while the RTX 2060 is in the 58th percentile of all GPUs. This mismatch is evident in the measured frame rates: the combo performs respectably at 1080p but falls off sharply at higher resolutions. The rank of 1426 suggests that most better-performing combos either use a stronger GPU or a more balanced pairing.

In the database’s context, this combo is closer to the bottom than the middle. For comparison, the CPU’s nearest rivals (Intel Core i5-14500HX, Intel Core Ultra 9 185H, etc.) would likely produce similar results when paired with the same GPU, since the GPU is the limiting factor. The GPU’s nearest rivals (AMD Radeon RX 7600S, AMD Radeon Pro 5600M) would also produce similar frame rates when paired with a CPU of this caliber.

Settings Recommendations

The measured data supports a clear recommendation: play at 1920x1080 with Medium or High settings. At 1080p Medium, the combo produces 110.4 FPS, which is smooth for a survival game. High settings yield 88.6 FPS, which is still well above the 60 FPS threshold for comfortable play. Low settings at 1080p provide 139.8 FPS, but the visual quality trade-off is likely too steep for most players.

For 2560x1440, the best experience comes from Low settings at 90.3 FPS. Medium at 75.3 FPS is also playable, but High drops to 57.4 FPS, which may feel inconsistent in action-heavy moments. Ultra at 1440p produces 44.9 FPS, which is not recommended. At 3840x2160, only Low settings (50.4 FPS) approach playability, and even that is borderline for a game that benefits from steady frame pacing.

The optimal balance of visual fidelity and performance is 1920x1080 at High settings. This provides 88.6 FPS, a significant improvement over the 63.6 FPS of Ultra, while retaining most of the graphical quality. If frame rate is the priority, 1080p Medium at 110.4 FPS is the sweet spot. Avoid Ultra at all resolutions unless visual quality trumps playability, as the frame rate drops to 63.6 FPS at 1080p and 23.5 FPS at 4K.

Measured FPS Breakdown

At 1920x1080, the combo delivers its best results. Low settings produce 139.8 FPS, Medium yields 110.4 FPS, High reaches 88.6 FPS, and Ultra drops to 63.6 FPS. The scaling is consistent, with each preset step costing roughly 20-25 FPS.

At 2560x1440, the frame rates fall by roughly 35-40 percent. Low settings still manage 90.3 FPS, Medium produces 75.3 FPS, High drops to 57.4 FPS, and Ultra falls to 44.9 FPS. This resolution is playable only on Low or Medium.

At 3840x2160, the results are largely unusable. Low settings yield 50.4 FPS, Medium produces 41.1 FPS, High drops to 29.3 FPS, and Ultra bottoms out at 23.5 FPS. Only the Low preset approaches a playable frame rate, and even that is marginal.

The data shows a clear pattern: this combo is a 1080p machine for Palworld. The RTX 2060’s 6 GB VRAM and 336.0 GB/s bandwidth are sufficient for 1080p but become increasingly inadequate as resolution increases. The Ryzen 7 9700X’s 5.50 GHz boost clock and 8 cores ensure the CPU side is never the limiting factor in any of these scenarios. For players with 1440p or 4K monitors, a GPU upgrade would be necessary to unlock the CPU’s full potential in this game.