Palworld

Palworld

AVERAGE FPS
77
good

This combination provides smooth gameplay with an average of 77 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 27 36 47 58
1440p QHD 49 65 84 104
1080p Full HD 75 98 128 158

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 58
3840x2160 Medium 47
3840x2160 High 36
3840x2160 Ultra 27
2560x1440 Low 104
2560x1440 Medium 84
2560x1440 High 65
2560x1440 Ultra 49
1920x1080 Low 158
1920x1080 Medium 128
1920x1080 High 98
1920x1080 Ultra 75

Palworld with AMD Ryzen 7 9700F + AMD Radeon RX 6650 XT, In-Depth Analysis

The AMD Ryzen 7 9700F paired with the AMD Radeon RX 6650 XT delivers a mid-range 1080p experience in Palworld, with performance that scales predictably across resolutions and settings. This combination ranks 1894th out of 2944 tested combos for this game, placing it in the lower-middle portion of the database. The data shows a system that can handle the game at high framerates in Full HD, but struggles to maintain playable performance at 4K with higher quality presets.

How This Combo Ranks

The combo’s rank of 1894 out of 2944 tested pairings places it in the 36th percentile of all CPU-GPU combinations tested for Palworld. This means roughly two-thirds of tested systems outperform this pairing in this specific title. The ranking reflects the GPU’s position as a mid-range part; the RX 6650 XT sits at the 65th percentile among all GPUs in the database, while the Ryzen 7 9700F achieves a 94th percentile ranking among all CPUs. The substantial gap between CPU and GPU percentiles indicates that the graphics card is the primary constraint in this pairing.

Looking at the CPU’s nearest rivals, the Ryzen 7 9700F’s average benchmark score of 69996 puts it within a narrow band of comparable processors. The AMD Ryzen 9 7940HX scores 69875, a 0.2% difference, while the Intel Core i7-14700KF scores 70163, putting the 9700F 0.2% behind. The AMD Ryzen 9 7950X scores 69515 (0.7% lower) and the Intel Core i7-14700K scores 69355 (0.9% lower). These tiny deltas suggest that in pure CPU throughput, the 9700F is essentially interchangeable with these rivals for gaming workloads. In Palworld specifically, the CPU is unlikely to be the deciding factor between these processors, as the game’s performance ceiling is set by the GPU.

The GPU’s nearest rivals tell a similar story. The RX 6650 XT’s average benchmark score of 19765 compares closely with the NVIDIA Tesla K40m (19885, 0.6% higher), AMD FirePro D300 (19637, 0.7% lower), AMD FirePro W7000 (19905, 0.7% higher), and NVIDIA Quadro K5200 (19602, 0.8% lower). These are older workstation-class parts, which highlights that the RX 6650 XT’s raw compute scores are not exceptional by modern standards. However, its gaming-specific features and driver optimization for titles like Palworld will produce different results than these raw compute benchmarks suggest.

GPU Role

The AMD Radeon RX 6650 XT is built on the RDNA 2.0 architecture with the Navi 23 chip, manufactured on a 7 nm process at TSMC. It contains 11,060 million transistors on a 237 mm² die. The GPU operates with a base clock of 2055 MHz, a game clock of 2410 MHz, and a boost clock of 2635 MHz. Memory runs at 2190 MHz with 17.5 Gbps effective speed across an 8 GB GDDR6 interface with a 128-bit bus, yielding 280.3 GB/s of memory bandwidth.

For Palworld, the 8 GB VRAM capacity is the most significant specification. The game’s open-world survival genre with many dynamic objects and textures can consume memory quickly at higher resolutions. The measured FPS data shows this limitation clearly. At 3840x2160 with Ultra settings, the average FPS drops to 27, which is below the threshold for smooth gameplay. Even at Medium settings in 4K, the average is 47 FPS with a minimum of 40 and maximum of 54. The 8 GB frame buffer, combined with the 128-bit bus, becomes a bottleneck at 4K resolution where texture data requirements increase substantially.

The GPU’s compute capabilities include 2048 shading units, 128 texture mapping units, and 64 render output units. It also features 32 ray accelerators for ray tracing workloads. The pixel rate is 168.6 GPixel/s, texture rate is 337.3 GTexel/s, and FP32 performance reaches 10.79 TFLOPS. These specifications position the card as a 1080p-focused solution. In Palworld, the data confirms this: at 1920x1080 with Medium settings, the average FPS is 128, which is excellent for a survival game with frequent combat and building mechanics.

The GPU’s power delivery requires a 450 W suggested PSU with a single 8-pin connector, and the card has a TDP of 176 W. It uses a PCIe 4.0 x8 interface, which provides sufficient bandwidth for the 8 GB frame buffer. The card supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, ensuring compatibility with Palworld’s rendering requirements.

Resolution Scaling

The FPS scaling from 1080p to 4K reveals the GPU-bound nature of this combination. At 1920x1080 with Low settings, the average FPS is 158. Moving to 2560x1440 at Low, the average drops to 104, a 34.2% reduction. At 3840x2160 with Low, the average falls to 58, which is 63.3% lower than the 1080p figure. This steep decline indicates that the GPU’s compute and memory bandwidth are the limiting factors as pixel count increases.

The Medium settings preset shows a similar pattern. At 1080p, the average is 128 FPS. At 1440p, it drops to 84 FPS (34.4% lower), and at 4K it reaches 47 FPS (63.3% lower). The consistency of these percentages across Low and Medium presets suggests that the scaling is primarily resolution-driven rather than settings-driven. The GPU’s fill rate and memory bandwidth are being saturated at higher resolutions regardless of the quality preset.

High settings exhibit the same trend. The 1080p average is 98 FPS, 1440p drops to 65 FPS (33.7% lower), and 4K falls to 36 FPS (63.3% lower). Ultra settings show the most dramatic drop: 75 FPS at 1080p, 49 FPS at 1440p (34.7% lower), and 27 FPS at 4K (64% lower). The consistent ~34% drop from 1080p to 1440p and ~63-64% drop from 1080p to 4K across all presets confirms that resolution scaling is uniform and that the CPU is not introducing additional bottlenecks at lower resolutions.

The 1080p to 1440p transition is the most playable step. At 1440p, even Ultra settings maintain an average of 49 FPS, which is acceptable for a survival game where reaction times are less critical than in competitive shooters. The 4K results, however, are marginal at best, with only the Low preset achieving an average above 60 FPS (58 FPS, technically below 60). This makes 4K a poor choice for this combination unless the user is willing to accept significant compromises in visual quality.

Measured FPS Breakdown

At 1920x1080, the RX 6650 XT with the Ryzen 7 9700F delivers strong performance across all presets. The Low preset averages 158 FPS, which is well above the 144 Hz refresh rate of many gaming monitors. Medium averages 128 FPS with a minimum of 109 and maximum of 147, providing a smooth experience with headroom for frame drops during intense moments. High averages 98 FPS, still comfortably above 60 FPS. Ultra averages 75 FPS, which is playable but may show occasional dips during heavy combat or when many Pals are on screen.

At 2560x1440, performance remains solid but begins to show the GPU’s limitations. Low averages 104 FPS, which is excellent for 1440p gaming. Medium averages 84 FPS with a minimum of 72 and maximum of 97, ensuring consistent frame delivery. High averages 65 FPS, which is acceptable for most players, though the lack of a reported minimum FPS means potential stutters cannot be assessed. Ultra averages 49 FPS, which is below the 60 FPS target that most gamers prefer, but the game remains playable.

At 3840x2160, the combination struggles to maintain playable framerates at higher presets. Low averages 58 FPS, just below the 60 FPS threshold. Medium averages 47 FPS with a minimum of 40 and maximum of 54, which will result in noticeable judder during fast movement. High averages 36 FPS, and Ultra averages 27 FPS. These figures make 4K gaming impractical for this pairing, except at the lowest settings where the experience is still not consistently smooth.

The Medium preset at 1080p (128 FPS average) and 1440p (84 FPS average) provides the best balance of visual quality and performance. The minimum FPS figures of 109 and 72 respectively indicate that the system maintains smooth frame delivery even during demanding scenes. The Ultra preset at 1080p (75 FPS average) is also viable for users who prioritize visual fidelity over maximum frame rate.

FAQ

Q: Can this combination run Palworld at 60 FPS in 4K?

A: No. The data shows the highest 4K average is 58 FPS at Low settings, which is below 60 FPS. Medium settings average 47 FPS, High averages 36 FPS, and Ultra averages 27 FPS. The 4K experience is only borderline playable at Low settings.

Q: What is the best resolution for this CPU-GPU pairing?

A: The 1920x1080 resolution delivers the most consistent performance. All four presets average above 75 FPS, with Low reaching 158 FPS, Medium at 128 FPS, High at 98 FPS, and Ultra at 75 FPS. This resolution fully utilizes the GPU’s capabilities without hitting memory bandwidth limits.

Q: How does the RX 6650 XT compare to its nearest rivals in raw benchmark scores?

A: The RX 6650 XT has an average benchmark score of 19765. The NVIDIA Tesla K40m scores 19885, which is 0.6% higher. The AMD FirePro D300 scores 19637 (0.7% lower), the AMD FirePro W7000 scores 19905 (0.7% higher), and the NVIDIA Quadro K5200 scores 19602 (0.8% lower). These deltas are minimal.

Q: Is the Ryzen 7 9700F a bottleneck for the RX 6650 XT in Palworld?

A: No. The CPU’s percentile rank of 94 among all CPUs versus the GPU’s 65th percentile indicates the CPU has ample headroom. The consistent FPS scaling across resolutions confirms that the GPU is the limiting component, not the processor.

Q: What is the performance difference between Medium and High settings at 1440p?

A: At 2560x1440, Medium averages 84 FPS with a minimum of 72 and maximum of 97. High averages 65 FPS with no reported minimum or maximum. This represents a 22.6% reduction in average FPS when moving from Medium to High.

Q: Does the 8 GB VRAM affect performance at 1080p?

A: The data suggests no VRAM limitation at 1080p. The lowest average FPS at this resolution is 75 FPS on Ultra settings, and all presets maintain smooth performance. The 8 GB frame buffer is sufficient for Palworld at 1080p, but becomes a constraint at 4K.

CPU Role

The AMD Ryzen 7 9700F is a 9000 series processor based on the Zen 5 architecture, codenamed Granite Ridge. It features 8 cores and 16 threads, with a base clock of 3.80 GHz and a boost clock of 5.50 GHz. The CPU is built on a 4 nm process at TSMC, containing 8,315 million transistors on a 70.6 mm² die. It supports DDR5 memory in a dual-channel configuration with 89.6 GB/s of memory bandwidth and includes 32 MB of shared L3 cache, plus 80 KB of L1 cache and 1 MB of L2 cache per core.

For Palworld, the CPU’s 8 cores and 16 threads are more than sufficient. The game’s simulation of Pals, building structures, and world state benefits from multi-threaded performance, but the 9700F’s PassMark multithread score of 36470 indicates strong parallel processing capability. The single-thread score of 4691 ensures that the game’s main thread, which handles player input and physics, has ample headroom.

The CPU’s percentile ranking of 94 among all CPUs means it outperforms 94% of processors in the database. Its average benchmark score of 69996 places it within 1% of several high-end rivals, including the AMD Ryzen 9 7940HX (69875, 0.2% higher), Intel Core i7-14700KF (70163, 0.2% lower), AMD Ryzen 9 7950X (69515, 0.7% higher), and Intel Core i7-14700K (69355, 0.9% higher). These negligible differences mean that swapping to any of these CPUs would not meaningfully change Palworld performance with this GPU.

The CPU operates with a 65 W TDP and supports PCIe Gen 5 with 24 lanes. It uses the AMD Socket AM5 and has a production status of Active, with a release date of 2025-09-15. The processor includes ECC memory support and has an unlocked multiplier for overclocking. In Palworld, the CPU’s 89.6 GB/s memory bandwidth is adequate for feeding the GPU with game data, and the 32 MB L3 cache helps with frequently accessed game assets.

At 1080p with Low settings, the average FPS of 158 is likely near the game’s engine limit or the GPU’s maximum output, rather than being CPU-limited. The CPU’s 94th percentile ranking versus the GPU’s 65th percentile confirms that the processor is not the constraint. Even at 1080p Ultra, the 75 FPS average is well within what the CPU can handle, as evidenced by the consistent scaling to 1440p and 4K.

Settings Recommendations

For users with a 1920x1080 display, the Medium preset offers the best experience. The 128 FPS average with a minimum of 109 FPS ensures smooth gameplay even during chaotic moments with multiple Pals or large base-building operations. The visual quality improvement over Low is substantial, and the 30 FPS headroom above High settings means there is room for frame drops without falling below 60 FPS.

At 2560x1440, Medium remains the recommended preset. The 84 FPS average with a 72 FPS minimum provides a reliable experience that stays above 60 FPS. High settings at 65 FPS average are acceptable but offer less margin for demanding scenes. The 49 FPS average at Ultra makes it a poor choice, as frame pacing issues will be noticeable.

For 4K displays, the data suggests avoiding this resolution with this combination. The Low preset averages 58 FPS, which is marginally below 60 FPS and will feel slightly inconsistent. Medium drops to 47 FPS, which is playable but not ideal for a survival game where quick reactions can be necessary. Users with 4K displays should consider running the game at 1440p with Medium settings for a better experience.

The Ultra preset is only viable at 1080p, where it averages 75 FPS. At 1440p, it drops to 49 FPS, and at 4K it falls to 27 FPS. Given that the visual difference between High and Ultra in most games is subtle, the 23 FPS average difference between these presets at 1080p (98 vs 75 FPS) suggests that High is the better choice for users seeking higher frame rates with minimal visual compromise.

Overall, the Ryzen 7 9700F and RX 6650 XT combination is best utilized at 1080p with Medium or High settings, or at 1440p with Medium settings. The system delivers playable performance across most configurations, with the GPU being the definitive limiting factor at higher resolutions and settings.

Hardware Specifications

AMD Ryzen 7 9700F

Cores / Threads 8 / 16
Base Clock 3800 MHz
Boost Clock 5500 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

AMD Radeon RX 6650 XT

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 2635 MHz MHz
TDP 176 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 7 9700F + AMD Radeon RX 6650 XT in Palworld

Resolution Settings Avg FPS
3840x2160 Low 58.0
3840x2160 Medium 47.0
3840x2160 High 36.0
3840x2160 Ultra 27.0
2560x1440 Low 104.0
2560x1440 Medium 84.0
2560x1440 High 65.0
2560x1440 Ultra 49.0
1920x1080 Low 158.0
1920x1080 Medium 128.0
1920x1080 High 98.0
1920x1080 Ultra 75.0

Palworld with Ryzen 7 9700F + Other GPUs

See how Palworld performs with the same CPU but different graphics cards.

Palworld with RX 6650 XT + Other CPUs

See how Palworld performs with the same GPU but different processors.

Other Games with Ryzen 7 9700F + RX 6650 XT

Explore FPS benchmarks for other games using this same hardware combination.