Palworld

Palworld

AVERAGE FPS
121
excellent

This combination delivers exceptional performance with an average of 121 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 45 54 76 88
1440p QHD 77 100 131 162
1080p Full HD 116 156 203 249

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 88
3840x2160 Medium 76
3840x2160 High 54
3840x2160 Ultra 45
2560x1440 Low 162
2560x1440 Medium 131
2560x1440 High 100
2560x1440 Ultra 77
1920x1080 Low 249
1920x1080 Medium 203
1920x1080 High 156
1920x1080 Ultra 116

Palworld with AMD Ryzen 7 7700 + AMD Radeon RX 9070 XT, In-Depth Analysis

Resolution Scaling

The measured frame rates for Palworld across the three tested resolutions reveal a clear pattern of GPU-bound scaling at higher settings. At 1080p with High settings, the AMD Ryzen 7 7700 paired with the AMD Radeon RX 9070 XT delivers an average of 156 FPS. Moving to 1440p High, the frame rate drops to 100.1 FPS, a decline of approximately 36% from the 1080p result. At 4K High, the average falls further to 53.5 FPS, representing a 66% reduction from the 1080p baseline. This steep scaling curve indicates that the Radeon RX 9070 XT's rendering throughput—not the CPU—becomes the limiting factor as pixel count rises.

The data across settings tiers reinforces this interpretation. At Low settings, the 1080p result reaches 249.3 FPS, while 1440p Low produces 161.9 FPS and 4K Low yields 87.9 FPS. The gap between Low and High at 4K is substantial: 87.9 FPS versus 53.5 FPS, a 64% advantage for the lower preset. At 1080p, the same Low-to-High comparison shows 249.3 FPS versus 156 FPS, a smaller relative difference of 60%. The fact that even at 4K Low the system stays above 87 FPS suggests the GPU has ample headroom when graphical load is reduced, but the heavy shader and geometry work at High and Ultra presets quickly saturates the 9070 XT's compute resources.

Ultra settings tell the most dramatic story. At 4K Ultra, the average FPS collapses to 44.9, below the 53.5 FPS of 4K High. At 1440p Ultra, the average is 77.2 FPS, while 1080p Ultra holds at 115.8 FPS. The scaling from 1080p Ultra to 4K Ultra shows a 61% performance loss, nearly identical to the High preset's 66% loss. This consistency indicates that Palworld's Ultra preset adds a fixed overhead across resolutions, likely from increased draw distances and particle effects, rather than a resolution-dependent cost. The 1080p Ultra result of 115.8 FPS still exceeds 60 FPS, but the 4K Ultra figure of 44.9 FPS falls below the commonly accepted smoothness threshold.

Overall, the resolution scaling data points to the GPU as the primary bottleneck above 1080p. The CPU's role becomes more apparent at lower resolutions and settings, where frame rates exceed 200 FPS and the processor must feed the GPU with draw calls and game logic updates. At 1080p Low, the 249.3 FPS average suggests the Ryzen 7 7700 can sustain very high frame rates, but the RX 9070 XT's performance ceiling at 4K Ultra limits the experience to sub-60 FPS territory.

CPU Role

The AMD Ryzen 7 7700 brings 8 cores and 16 threads based on the Zen 4 architecture, with a base clock of 3.80 GHz and a boost clock of 5.30 GHz. In synthetic benchmarks, this processor scores 8,484 in 3DMark's 16-thread test and 8,479 in the max-thread test, indicating strong multi-threaded scaling. The single-thread score of 1,049 in 3DMark and 4,136 in Cinebench R23 single-core shows capable per-core performance, which matters for Palworld's game logic and physics simulation that often rely on a few heavily loaded threads.

Palworld's measured FPS at 1080p Low reaches 249.3, which is close to the practical limit for many displays. This high frame rate suggests the Ryzen 7 7700's 5.30 GHz boost clock and 32 MB of shared L3 cache provide enough single-thread headroom to avoid becoming a bottleneck at lower graphical settings. The 3DMark 2-thread score of 2,043 and 4-thread score of 3,931 further confirm that lightly threaded workloads, which are common in survival game tick rates and AI updates, are handled efficiently.

The CPU's position among rivals is tight. Compared to the AMD Ryzen 9 7940H, the 7700 shows a 0.1% higher average benchmark score (40,468 versus 40,431). Against the AMD Ryzen AI 9 365, it leads by 0.5%. The Intel Core i9-13905H scores 0.6% higher, and the Intel Core Ultra 5 235T trails by 1.2%. This clustering means the 7700's performance is essentially neck-and-neck with its nearest competitors, and any in-game differences would be negligible. The 91st percentile ranking among all CPUs indicates this processor sits well above the median for overall compute capability.

In Palworld specifically, the 1080p Ultra result of 115.8 FPS versus 1080p High's 156 FPS shows a 26% penalty for the Ultra preset. This gap is likely attributable to increased CPU-side work from additional NPCs or world objects, but the 7700 still maintains a playable frame rate. The fact that 1080p High achieves 156 FPS while 1440p High drops to 100.1 FPS (a 36% reduction) confirms that the CPU is not the limiting factor at 1440p; the GPU's pixel throughput takes over from there.

How This Combo Ranks

The combination of the AMD Ryzen 7 7700 and AMD Radeon RX 9070 XT ranks 473rd out of 1,718 tested combos in Palworld. This places the pairing in the top 27.5% of all configurations, which is a respectable position given the game's early access status and the wide variety of hardware tested. The rank reflects the system's ability to push high frame rates at 1080p and 1440p, while 4K performance is limited to 53.5 FPS at High settings.

Relative to the GPU's standalone position, the RX 9070 XT holds the 82nd percentile among all GPUs, with an average benchmark score of 39,647. Its nearest rivals include the AMD Radeon Pro 575 (39,703, 0.1% higher), NVIDIA RTX A500 Mobile (39,568, 0.2% lower), AMD Radeon Pro 575X (39,836, 0.5% higher), and AMD Radeon RX Vega 64 (39,879, 0.6% higher). These deltas are all within 1%, meaning the 9070 XT's raw compute is on par with several older or professional-oriented cards, despite its modern RDNA 4.0 architecture and 16 GB of GDDR6 memory.

The 473rd rank out of 1,718 combos suggests that while the CPU and GPU are both strong individually, their combined performance in Palworld is not exceptional. This could be due to the game's optimization, which may not fully utilize the 9070 XT's 4,096 shading units or the 7700's 8 cores. The 1080p Low result of 249.3 FPS is impressive, but the 4K Ultra result of 44.9 FPS indicates that the combo cannot maintain high frame rates at maximum settings in 4K. For context, the top-ranked combos likely achieve over 100 FPS at 4K, which this pairing cannot reach even at High settings (53.5 FPS).

The rank also reflects the balance between the two components. The 7700's 91st percentile CPU score is higher than the 9070 XT's 82nd percentile GPU score, suggesting the processor has more headroom relative to its peers. In Palworld, this means the GPU is the more likely bottleneck, especially at higher resolutions. Users seeking better 4K performance would need a more powerful GPU, while the CPU could handle a faster graphics card without becoming a constraint.

FAQ

Q: What is the average FPS at 1080p with High settings for this combo?

A: The AMD Ryzen 7 7700 with the AMD Radeon RX 9070 XT achieves an average of 156 FPS at 1920x1080 with High settings in Palworld.

Q: How does the 4K Ultra performance compare to 4K High?

A: At 3840x2160, the Ultra preset averages 44.9 FPS, while High settings average 53.5 FPS. The Ultra preset is approximately 16% slower than High at 4K.

Q: Is the CPU or GPU the limiting factor at 1440p?

A: The data indicates the GPU becomes the limiting factor above 1080p. At 1440p High, the average FPS is 100.1, compared to 156 at 1080p High, a 36% drop that aligns with GPU workload scaling rather than CPU limitations.

Q: What is the combo's rank among all tested configurations in Palworld?

A: This specific CPU-GPU pairing ranks 473rd out of 1,718 tested combos, placing it in the top 27.5% of all configurations.

Q: How does the RX 9070 XT's benchmark score compare to its nearest rival?

A: The RX 9070 XT has an average benchmark score of 39,647, which is 0.1% lower than the AMD Radeon Pro 575's score of 39,703. The difference is within measurement noise.

Q: What is the highest average FPS recorded for this combo in Palworld?

A: The highest average FPS is 249.3, achieved at 1920x1080 with Low settings. At Medium settings, the 1080p average is 202.9 FPS.

GPU Role

The AMD Radeon RX 9070 XT is built on the RDNA 4.0 architecture with the Navi 48 chip, manufactured on a 4 nm process by TSMC. It features 4,096 shading units, 256 texture mapping units, and 128 raster operation units, along with 64 ray tracing cores. The GPU operates at a base clock of 1660 MHz, with a boost clock of 2970 MHz and a game clock of 2400 MHz. Memory consists of 16 GB of GDDR6 on a 256-bit bus, delivering 644.6 GB/s of bandwidth, which is substantial for high-resolution textures and large open-world assets.

In Palworld, the GPU's performance is the primary driver of frame rates at all tested resolutions except for the lowest settings. At 1080p Low, the 249.3 FPS average shows the GPU can output very high frame rates when pixel shading demands are minimal. However, the transition to 1440p Low (161.9 FPS) and 4K Low (87.9 FPS) reveals a consistent scaling pattern: each doubling of pixel count reduces FPS by roughly 35-40%, which is typical for a GPU-bound scenario. The 9070 XT's 48.66 TFLOPS of FP32 compute and 760.3 GTexel/s texture rate are sufficient for 1440p High (100.1 FPS) but struggle to maintain 60 FPS at 4K High (53.5 FPS).

The GPU's VRAM capacity of 16 GB proves adequate for Palworld's largest assets. Even at 4K Ultra, where the average FPS drops to 44.9, there is no indication of memory swapping or texture pop-in that would suggest VRAM exhaustion. The 644.6 GB/s memory bandwidth supports high-resolution texture streaming, and the 256-bit bus provides enough throughput for the game's draw calls. The 9070 XT's position in the 82nd percentile among all GPUs, with an average benchmark score of 39,647, aligns with its measured in-game performance—strong but not top-tier.

The GPU's nearest rivals in synthetic benchmarks are all within 0.6% of its score, including the AMD Radeon Pro 575 (39,703), NVIDIA RTX A500 Mobile (39,568), AMD Radeon Pro 575X (39,836), and AMD Radeon RX Vega 64 (39,879). These results suggest that the 9070 XT's real-world Palworld performance is competitive with older high-end cards, but the 4K Ultra result of 44.9 FPS indicates it is not a 4K-max-settings GPU for this title. Users targeting 4K should expect to use High settings (53.5 FPS) or lower, while 1440p and 1080p offer smooth experiences across all presets.

Hardware Specifications

AMD Ryzen 7 7700

Cores / Threads 8 / 16
Base Clock 3800 MHz
Boost Clock 5300 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

AMD Radeon RX 9070 XT

VRAM 16 GB GDDR6
Base Clock —
Boost Clock 2970 MHz MHz
TDP 304 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 7 7700 + AMD Radeon RX 9070 XT in Palworld

Resolution Settings Avg FPS
3840x2160 Low 87.9
3840x2160 Medium 76.0
3840x2160 High 53.5
3840x2160 Ultra 44.9
2560x1440 Low 161.9
2560x1440 Medium 130.6
2560x1440 High 100.1
2560x1440 Ultra 77.2
1920x1080 Low 249.3
1920x1080 Medium 202.9
1920x1080 High 156.0
1920x1080 Ultra 115.8

Palworld with Ryzen 7 7700 + Other GPUs

See how Palworld performs with the same CPU but different graphics cards.

Palworld with RX 9070 XT + Other CPUs

See how Palworld performs with the same GPU but different processors.

Other Games with Ryzen 7 7700 + RX 9070 XT

Explore FPS benchmarks for other games using this same hardware combination.