Palworld

Palworld presents a demanding workload that scales significantly with resolution, and the measured data for the AMD Ryzen 7 5800X3D with the NVIDIA GeForce RTX 4070 reveals a clear progression of performance. At 1080p, the combination produces very high frame rates, but the most revealing metric is the drop when moving to 4K, which shifts the bottleneck firmly onto the GPU. The frame rate decline from the 1080p High preset to the 4K High preset is substantial, indicating that the RTX 4070's rendering capabilities are the limiting factor at higher pixel counts, while the processor has ample headroom to feed the graphics card at lower resolutions.

Resolution Scaling

The measured FPS data across the three resolutions shows a classic scaling pattern where the GPU becomes the primary constraint as pixel count increases. At 1920x1080 with the High preset, the combo achieves an average of 155 FPS, which drops to 102 FPS at 2560x1440, and further to 57 FPS at 3840x2160. This represents a 34% reduction in performance from 1080p to 1440p, and a 63% reduction from 1080p to 4K. The scaling is not linear, which is expected given that the pixel count quadruples from 1080p to 4K, but the actual FPS drop is less severe than that, suggesting that the CPU is still contributing at the lower end.

Looking at the Low preset, the pattern intensifies. At 1080p Low, the average FPS is 248, which falls to 163 at 1440p and then to 91 at 4K. The gap between 1080p and 1440p is 85 FPS, while the gap between 1440p and 4K is 72 FPS. This indicates that even at the lowest settings, the RTX 4070 is being pushed hard at 4K. The fact that the 1080p Low result is so high (248 FPS) suggests that the CPU is not a limiting factor at this resolution and settings combination, as the frame rate is well beyond typical display refresh rates.

The Medium preset provides the only complete data set with min and max FPS values. At 1080p Medium, the average is 201 FPS with a min of 171 and a max of 231. At 1440p Medium, the average drops to 132 FPS with a min of 113 and max of 152. At 4K Medium, the average is 73 FPS with a min of 62 and max of 85. The variance between min and max FPS at each resolution is relatively consistent, around 60 FPS, which indicates stable frame pacing without major stuttering, but the overall level shifts down as resolution increases.

For the Ultra preset, the data shows the most severe scaling. The 1080p Ultra average is 117 FPS, which is still playable, but this drops to 77 FPS at 1440p and then to 43 FPS at 4K. The 4K Ultra result is below the 60 FPS threshold commonly considered smooth, indicating that this combination is not suitable for maximum settings at the highest resolution. The overall pattern across all presets is that the RTX 4070's memory bandwidth of 504.2 GB/s and its 12 GB of GDDR6X memory become the limiting factors as resolution increases, while the CPU's 8 cores and 16 threads provide consistent performance headroom.

FAQ

Q: What is the average FPS at 1080p with High settings?

A: The measured average FPS for the AMD Ryzen 7 5800X3D with the NVIDIA GeForce RTX 4070 at 1920x1080 on High settings is 155 FPS.

Q: How does the 4K Ultra preset perform?

A: At 3840x2160 with Ultra settings, the combination produces an average of 43 FPS, which is below the 60 FPS threshold for smooth gameplay.

Q: Is there a significant performance difference between Low and Ultra at 1440p?

A: Yes, the data shows a large gap. At 2560x1440, the Low preset achieves an average of 163 FPS, while the Ultra preset averages 77 FPS, a difference of 86 FPS.

Q: What are the minimum and maximum FPS values recorded at 1080p Medium?

A: For the 1920x1080 Medium preset, the minimum FPS is 171 and the maximum FPS is 231, with an average of 201 FPS.

Q: Does the CPU or GPU limit performance at 4K?

A: The benchmark results indicate that at 3840x2160, the GPU is the limiting component, as frame rates drop significantly across all presets, while the CPU's performance metrics show it can handle high thread counts.

Q: What is the average FPS at 1440p with High settings?

A: The measured average FPS at 2560x1440 with High settings is 102 FPS.

How This Combo Ranks

The combination of the AMD Ryzen 7 5800X3D and NVIDIA GeForce RTX 4070 ranks 902 out of 3711 tested combos in Palworld. This percentile placement indicates that this setup performs in the top quarter of all possible combinations for this specific game. The rank is determined by the measured FPS data, and while it is not the absolute top tier, it places the combo in a strong position for competitive or high-refresh-rate play at most resolutions.

The CPU component, the Ryzen 7 5800X3D, holds an 80th percentile ranking against all CPUs, with an average benchmark score of 27896. Its nearest rivals include the AMD Ryzen 7 6800U with an average score of 27887 (a delta of 0%), the Intel Core i9-10900K at 27872 (a delta of 0.1%), and the AMD Ryzen AI 5 PRO 340 at 27932 (a delta of -0.1%). These scores are extremely close, indicating that the 5800X3D is competitive with these processors in general benchmarks, but its performance in Palworld is what drives the combo rank.

The GPU, the RTX 4070, ranks in the 81st percentile against all GPUs, with an average benchmark score of 37648. Its nearest rivals are the NVIDIA Tesla P4 at 37628 (a delta of 0.1%), the AMD Radeon RX Vega 56 at 37507 (a delta of 0.4%), and the NVIDIA GeForce RTX 4080 Mobile at 38135 (a delta of -1.3%). The RTX 4070 is slightly ahead of the desktop RX Vega 56 and the Tesla P4, but slightly behind the mobile RTX 4080 in synthetic benchmarks, though the in-game results will vary due to thermal and power constraints.

The combo rank of 902 out of 3711 suggests that while the individual components are strong, there are many other pairings that achieve higher FPS in Palworld. This is likely due to the game's specific engine demands, which may favor different architectures or memory configurations. The data shows that this combo is not at the absolute top, but it is far from the bottom, offering a balanced performance profile that is suitable for most gaming scenarios.

Measured FPS Breakdown

The measured FPS data provides a comprehensive look at how this combo performs across different settings and resolutions. At 1920x1080, the results are consistently high. The Low preset averages 248 FPS, which is the highest recorded value for this combo. The Medium preset averages 201 FPS with a minimum of 171 and a maximum of 231. The High preset averages 155 FPS, and the Ultra preset averages 117 FPS. This shows that at 1080p, even the most demanding settings are playable, and the lower presets push well beyond the refresh rate of most monitors.

Moving to 2560x1440, the performance remains strong but begins to show the GPU's limits. The Low preset averages 163 FPS, which is still very high. The Medium preset averages 132 FPS with a minimum of 113 and a maximum of 152. The High preset averages 102 FPS, which is a solid result for 1440p gaming. The Ultra preset averages 77 FPS, which is still above the 60 FPS threshold but shows a noticeable drop from the High preset. The difference between Low and Ultra at 1440p is 86 FPS, highlighting the significant impact of graphical settings on this resolution.

At 3840x2160, the performance drops considerably. The Low preset averages 91 FPS, which is playable but not as smooth as lower resolutions. The Medium preset averages 73 FPS with a minimum of 62 and a maximum of 85, which is near the edge of smooth gameplay. The High preset averages 57 FPS, which is below the 60 FPS target. The Ultra preset averages 43 FPS, which is not ideal for a smooth experience. The data shows that this combo is best suited for 1080p or 1440p gaming, and 4K is only viable at lower settings.

The Medium preset is the only one that provides complete min and max data for all resolutions. At 1080p, the range is 171 to 231 FPS, at 1440p it is 113 to 152 FPS, and at 4K it is 62 to 85 FPS. The consistent spread of approximately 60 FPS across all resolutions indicates that frame times are stable, with no major spikes or drops. This is a positive sign for gameplay smoothness, even when the average FPS is lower.

GPU Role

The NVIDIA GeForce RTX 4070 plays a critical role in determining the performance ceiling for this combo in Palworld. The GPU is built on the Ada Lovelace architecture with a 5 nm process node and contains 35,800 million transistors on a 294 mm² die. It features 5888 shading units, 184 texture mapping units, and 64 raster output units. The core clocks are a base of 1920 MHz and a boost of 2475 MHz, which are relatively high for a desktop GPU.

The memory subsystem is a key factor in higher resolutions. The RTX 4070 has 12 GB of GDDR6X memory on a 192-bit bus, providing a bandwidth of 504.2 GB/s. This bandwidth is sufficient for 1080p and 1440p gaming, but at 4K, the demand for memory bandwidth increases significantly. The measured FPS at 4K shows a notable drop across all presets, which correlates with the GPU's memory bandwidth limitations. The 12 GB capacity is also a consideration, as Palworld's open-world environments can consume significant VRAM, especially at higher settings.

The GPU's compute capabilities are also relevant. The FP32 performance is rated at 29.15 TFLOPS, which is substantial for a mid-range to high-end card. The pixel rate is 158.4 GPixel/s and the texture rate is 455.4 GTexel/s. These figures indicate that the GPU can handle complex shading and texture work, but the actual in-game performance is limited by the specific workload. The benchmark results show that the GPU is not the bottleneck at 1080p, where the CPU can push frame rates higher, but it becomes the limiting factor as resolution increases.

The RTX 4070's power draw is rated at 200 W, with a suggested PSU of 550 W. This is a manageable power requirement for most systems. The GPU supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4, ensuring compatibility with modern game APIs. The data shows that the GPU's performance in Palworld is solid, but the 4K results indicate that users should adjust settings to maintain playable frame rates.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend on the target resolution and desired frame rate. For 1920x1080, the Ultra preset is the best choice for visual quality, as it still achieves an average of 117 FPS. This is well above the 60 FPS threshold and provides a high level of detail. If a higher frame rate is preferred, the High preset at 155 FPS is also an excellent option, offering a balance between visual fidelity and performance.

For 2560x1440, the High preset is the recommended starting point, with an average of 102 FPS. This provides a good balance and is suitable for most gaming monitors. The Medium preset at 132 FPS is also a strong choice if a higher frame rate is desired, though it will reduce visual quality. The Ultra preset at 77 FPS is still playable, but it may not be ideal for fast-paced gameplay. The Low preset at 163 FPS is only recommended for competitive play where frame rate is the top priority.

For 3840x2160, the data suggests that the Medium preset is the best compromise, with an average of 73 FPS and a minimum of 62 FPS. This is just above the 60 FPS threshold and provides a decent visual experience. The Low preset at 91 FPS is also playable and will offer smoother gameplay, but at a significant cost to visual quality. The High preset at 57 FPS is below the 60 FPS target, and the Ultra preset at 43 FPS is not recommended for a smooth experience. For 4K gaming, users should be prepared to use Medium or Low settings to maintain acceptable performance.

The Medium preset is the only one that provides min and max FPS data, which shows that it has a stable frame rate range. This makes it a reliable choice for a consistent experience. The data indicates that this combo is best utilized at 1080p or 1440p with High or Ultra settings, while 4K gaming requires a trade-off between visual quality and frame rate.

CPU Role

The AMD Ryzen 7 5800X3D is a key component in this combo, and its performance in Palworld is characterized by its high thread count and large cache. The CPU has 8 cores and 16 threads based on the Zen 3 architecture (codenamed Vermeer) on a 7 nm process node. It operates with a base clock of 3.40 GHz and a boost clock of 4.50 GHz. The 96 MB of shared L3 cache is a standout feature, as it can significantly improve performance in games that benefit from large cache sizes.

The CPU's benchmark scores show a strong multi-threaded performance. It achieves a Cinebench R23 multicore score of 14317 and a single-core score of 1452. In Geekbench, it scores 11765 in multicore and 2017 in single-core. The PassMark multithread score is 28309, with a single-thread score of 3234. These numbers indicate that the CPU is well-balanced, providing strong performance in both multi-threaded and single-threaded workloads.

In Palworld, the CPU's role is to manage the game's simulation, AI, and physics. The 8 cores and 16 threads are sufficient to handle these tasks without becoming a bottleneck at lower resolutions. The measured FPS at 1080p, which reaches up to 248 FPS on Low settings, suggests that the CPU is not limiting performance at this resolution. Even at 1080p Ultra, the 117 FPS result shows that the CPU can keep up with the GPU's output.

However, the CPU's performance is not the primary factor in the frame rate drops at higher resolutions. The data shows that as resolution increases, the frame rate decreases regardless of the CPU's capabilities. This confirms that the GPU is the limiting component at 4K, while the CPU provides a solid foundation for the entire range of settings. The CPU's 80th percentile ranking against all CPUs, with an average benchmark score of 27896, places it in a competitive position, though its nearest rivals are very close in score.

The Ryzen 7 5800X3D's 105 W TDP is a consideration for cooling, but it is a capable processor for gaming. The data shows that it does not bottleneck the RTX 4070 at any resolution in Palworld, making it a suitable partner for this GPU. The combination of a strong CPU and GPU results in the 902nd rank out of 3711 combos, which is a solid performance for a modern gaming system.