Palworld

Palworld presents a demanding survival sandbox environment where the AMD Ryzen 7 5800X and NVIDIA GeForce RTX 2060 SUPER combination shows clear performance boundaries. The measured data indicates a system that is firmly GPU-limited at higher resolutions, while still offering playable frame rates at 1080p across most settings presets. This analysis breaks down the measured FPS results to understand where this combo excels and where it falls short.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and consistent across all settings, confirming that the NVIDIA GeForce RTX 2060 SUPER is the primary bottleneck as resolution increases. At High settings, the average frame rate falls from 95 FPS at 1920x1080 to 62 FPS at 2560x1440, a reduction of 33 FPS, and then further down to 35 FPS at 3840x2160. This progression shows a roughly 63% performance loss from 1080p to 4K, which is typical for a GPU with 8 GB of VRAM and a 256-bit memory bus when pushed to higher pixel counts.

The scaling pattern at Low settings is even more revealing. The 152 FPS average at 1080p drops to 100 FPS at 1440p and then to 55 FPS at 4K. The percentage drop from 1440p to 4K is 45%, which is slightly less severe than the 50% drop seen from 1080p to 1440p. This suggests that at lower settings, the CPU begins to play a larger role at 1080p, but the GPU still dominates the 4K result. The data indicates that this system is not designed for 4K gaming in Palworld, as even the lowest settings fail to maintain 60 FPS at that resolution.

The Medium preset shows the most complete data set with min and max FPS readings. At 1080p, the average is 123 FPS with a minimum of 105 FPS and maximum of 142 FPS. Moving to 1440p, the average drops to 81 FPS with a minimum of 69 FPS and maximum of 93 FPS. At 4K, the average falls to 45 FPS with a minimum of 38 FPS and maximum of 52 FPS. The consistent minimum frame rates suggest that the system does not experience severe stuttering, but rather a steady decline in performance as pixel count increases. The Ultra preset follows the same pattern, with 72 FPS at 1080p dropping to 47 FPS at 1440p and 26 FPS at 4K.

GPU Role

The NVIDIA GeForce RTX 2060 SUPER, based on the TU106 chip and Turing architecture, operates with a base clock of 1470 MHz and a boost clock of 1650 MHz. The 8 GB of GDDR6 memory on a 256-bit bus provides 448.0 GB/s of bandwidth. These specifications align with the observed performance in Palworld, where the GPU is clearly the limiting factor at higher resolutions. The card's 2176 shading units and 64 ROPs handle the game's rendering demands, but the 4K results show that the architecture is stretched beyond its comfort zone.

The GPU's memory configuration appears sufficient for 1080p and 1440p gaming in Palworld, as the frame rates remain playable at these resolutions. However, at 4K, the combination of higher pixel count and the game's open-world rendering likely exceeds the 8 GB VRAM capacity, contributing to the significant FPS drop. The measured data shows that the RTX 2060 SUPER performs within its expected range for this title, with its percentile rank of 62 out of all GPUs indicating it is a mid-range performer. The average benchmark score of 18093 places it slightly below the NVIDIA GeForce RTX 3060 Mobile, which scores 18159, a delta of -0.4%.

The GPU's compute capabilities, as shown by the Passmark G3D score of 16462 and Geekbench OpenCL score of 76957, provide context for its gaming performance. The card's FP32 throughput of 7.181 TFLOPS is adequate for Palworld's visual effects, but the 4K Ultra settings demand more than this hardware can deliver. The data indicates that the RTX 2060 SUPER is best suited for 1080p and 1440p gaming, where it can maintain respectable frame rates across all settings presets.

FAQ

Q: Can this system run Palworld at 4K resolution?

A: The measured data shows that at 4K, the average FPS ranges from 26 FPS at Ultra settings to 55 FPS at Low settings. None of the settings presets achieve a stable 60 FPS at 3840x2160, indicating that 4K gaming is not viable for this combination.

Q: What is the best resolution for this CPU and GPU combo?

A: At 1920x1080, all settings presets deliver average frame rates above 72 FPS, with the Low preset reaching 152 FPS. This resolution provides the most headroom and is clearly the sweet spot for this system.

Q: How does the RTX 2060 SUPER compare to its nearest rivals?

A: The RTX 2060 SUPER has an average benchmark score of 18093, which is 0.4% lower than the RTX 3060 Mobile (18159) and 0.5% lower than the AMD Radeon Pro 5700 (18189). It outperforms the AMD Radeon RX 460 by 1.5% and the Intel Arc A770M by 1.6%.

Q: Is the Ryzen 7 5800X a bottleneck at 1080p?

A: The data shows that at 1080p Low settings, the system achieves 152 FPS, which is likely CPU-limited given the GPU's performance at higher resolutions. However, at High settings, the frame rate drops to 95 FPS, indicating that the GPU becomes more involved at higher graphical loads.

Q: What is the performance difference between Low and Ultra settings at 1440p?

A: At 2560x1440, the Low preset averages 100 FPS, while the Ultra preset averages 47 FPS. This represents a 53% performance reduction when moving from the lowest to the highest settings.

Q: Does the system maintain consistent frame rates?

A: The only preset with min and max FPS data is Medium, which shows a minimum of 105 FPS at 1080p, 69 FPS at 1440p, and 38 FPS at 4K. These minimums are close to the averages, suggesting stable performance without major frame drops.

Settings Recommendations

Based on the measured FPS data, the High preset at 1920x1080 provides the best balance between visual quality and performance, averaging 95 FPS. This is well above the 60 FPS threshold for smooth gameplay and represents a significant improvement over the Medium preset's 123 FPS while still maintaining high visual fidelity. The Ultra preset at this resolution drops to 72 FPS, which is still playable but may not justify the additional GPU load.

For users prioritizing maximum frame rates, the Low preset at 1080p delivers 152 FPS, which is suitable for competitive play or for users with high refresh rate monitors. At 2560x1440, the High preset's 62 FPS average is the recommended choice, as it maintains the 60 FPS target with good visuals. The Medium preset at 1440p also works well at 81 FPS, but the step down in quality is noticeable compared to High.

The 4K resolution is not recommended for this system, as even the Low preset only achieves 55 FPS. The Ultra preset at 4K produces an unplayable 26 FPS average. The data suggests that users should stick to 1080p or 1440p for the best experience. The Medium preset at 1440p, with its 81 FPS average and 69 FPS minimum, offers a good middle ground for users who want higher resolution without sacrificing smoothness.

How This Combo Ranks

The AMD Ryzen 7 5800X and NVIDIA GeForce RTX 2060 SUPER combination ranks 2619 out of 3711 tested combos for Palworld, placing it in the 29th percentile of all tested systems. This ranking reflects the GPU's mid-range position, as the RTX 2060 SUPER's percentile rank of 62 means it performs better than 62% of all GPUs, but the system's overall performance is dragged down by the demanding nature of Palworld at higher resolutions.

The CPU, with its percentile rank of 81, is clearly the stronger component in this pairing. The Ryzen 7 5800X's average benchmark score of 29123 places it just above the Intel Core Ultra 5 135H (29093, delta 0.1%) and below the Intel Xeon Phi 7210 (29245, delta -0.4%). This suggests that the system's ranking in Palworld is primarily constrained by the GPU, not the processor.

Given that the combo ranks in the bottom third of all tested configurations, it is clear that this system is not optimized for Palworld's most demanding settings. However, the rank also indicates that there are many weaker combinations, and the system can still provide a good experience at 1080p. The data shows that the GPU is the limiting factor, and users looking to improve performance would need to upgrade the graphics card first.

Measured FPS Breakdown

At 1920x1080, the system delivers its strongest performance across all settings. The Low preset averages 152 FPS, which is the highest measured frame rate for this system. The Medium preset follows at 123 FPS, with a minimum of 105 FPS and a maximum of 142 FPS. The High preset averages 95 FPS, and the Ultra preset drops to 72 FPS. All settings at this resolution exceed 60 FPS, making 1080p the most reliable resolution for this combo.

At 2560x1440, performance drops noticeably but remains playable for most presets. The Low preset averages 100 FPS, while the Medium preset averages 81 FPS with a minimum of 69 FPS and maximum of 93 FPS. The High preset averages 62 FPS, which is just above the 60 FPS threshold. The Ultra preset falls to 47 FPS, which may be too low for some users. The Medium preset at 1440p offers the best balance with its consistent frame times.

At 3840x2160, the system struggles to maintain playable frame rates. The Low preset averages 55 FPS, which is below 60 FPS. The Medium preset averages 45 FPS with a minimum of 38 FPS and maximum of 52 FPS. The High preset drops to 35 FPS, and the Ultra preset produces an average of 26 FPS. None of the 4K settings provide a smooth experience, confirming that this resolution is beyond the capabilities of this hardware.

CPU Role

The AMD Ryzen 7 5800X, with its 8 cores and 16 threads based on Zen 3 architecture, provides substantial processing power for Palworld. The CPU's base clock of 3.80 GHz and boost clock of 4.70 GHz ensure that the processor is not the limiting factor in most scenarios. The 32 MB of L3 cache and dual-channel DDR4 memory support with 51.2 GB/s bandwidth contribute to the system's overall responsiveness.

The CPU's benchmark scores show it is a strong performer, with a Cinebench R23 multicore score of 15476 and a single-core score of 1574.5. The 3DMark 16-thread score of 7586 and Passmark multithread score of 27732 indicate that the processor can handle the game's background tasks and physics calculations without bottlenecking the GPU at lower resolutions. At 1080p Low settings, the 152 FPS result suggests that the CPU is capable of feeding frames faster than the GPU can render them.

However, the data shows that the CPU is not the primary constraint in Palworld. The frame rate scaling from Low to Ultra settings at each resolution is consistent with GPU-bound behavior, where the CPU's performance remains constant while the GPU's workload increases. The Ryzen 7 5800X's percentile rank of 81 and its proximity to rivals like the Intel Core i5-13500HX (delta -0.5%) demonstrate that it is a capable processor that will not hold back most GPU configurations. The system's overall ranking in Palworld is therefore a reflection of the GPU's limitations rather than the CPU's capabilities.