Palworld

Palworld

AVERAGE FPS
36
playable

This combination offers playable performance with an average of 36 FPS, though you may want to lower settings for smoother gameplay.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 15 19 24 25
1440p QHD 24 28 38 47
1080p Full HD 38 47 61 73

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 25
3840x2160 Medium 24
3840x2160 High 19
3840x2160 Ultra 15
2560x1440 Low 47
2560x1440 Medium 38
2560x1440 High 28
2560x1440 Ultra 24
1920x1080 Low 73
1920x1080 Medium 61
1920x1080 High 47
1920x1080 Ultra 38

Palworld with AMD Ryzen 7 5800X + AMD Radeon RX 570, In-Depth Analysis

Palworld with the AMD Ryzen 7 5800X and AMD Radeon RX 570 produces a heavily GPU-bound experience, with frame rates that are playable only at 1080p and low-to-medium settings. The data shows a clear ceiling imposed by the graphics card, while the eight-core processor provides ample headroom that never becomes the primary constraint in this title.

Resolution Scaling

The performance drop from 1080p to 4K is steep and consistent, confirming that the Radeon RX 570 is the limiting component across all tested presets. At Low settings, the average frame rate falls from 72.8 FPS at 1920x1080 to 46.5 FPS at 2560x1440, a reduction of roughly 36%, and then further down to 24.7 FPS at 3840x2160. This pattern indicates that the GPU's fill rate and memory bandwidth are saturated well before the CPU becomes a factor.

The scaling behavior is even more revealing at higher quality presets. Moving from 1080p High (46.7 FPS) to 1440p High (27.5 FPS) drops performance by about 41%, while the jump to 4K High lands at just 18.6 FPS. The Ultra preset shows the most severe degradation: 38 FPS at 1080p, 24.1 FPS at 1440p, and a nearly unplayable 14.5 FPS at 4K. These numbers suggest that the RX 570's 4 GB frame buffer and 224.0 GB/s memory bandwidth are overwhelmed when pixel count and texture detail rise together.

The gap between Low and Ultra at each resolution highlights where the GPU's architecture struggles. At 1080p, the difference between Low and Ultra is 34.8 FPS, but at 4K that gap shrinks to 10.2 FPS. This compression at higher resolutions indicates that the card is already at its compute limit, so additional graphical load yields diminishing absolute returns. The data points to a classic scenario where resolution scaling is governed almost entirely by the GPU's pixel throughput and memory subsystem, with the CPU's role remaining static.

CPU Role

The AMD Ryzen 7 5800X brings 8 cores and 16 threads based on the Zen 3 Vermeer architecture, with a base clock of 3.80 GHz and a boost clock of 4.70 GHz. Its benchmark results show strong multi-threaded capability, including a Cinebench R23 multi-core score of 23571 and a PassMark multithread score of 27732. In Palworld, this processing power is more than sufficient to feed the RX 570, as evidenced by the fact that frame rates drop consistently with resolution increases rather than showing CPU-related stutters or plateaus.

The CPU's single-thread performance is also robust, with a 3DMark single-thread score of 943 and a Geekbench single-core score of 2194. These figures matter for a game like Palworld, which relies on game logic and world simulation that often depend on a few primary threads. However, the measured FPS data shows no indication that the CPU is the bottleneck: at 1080p Low, the system reaches 72.8 FPS, which is likely near the practical limit for this GPU class, and raising resolution immediately cuts performance in a linear fashion.

The Ryzen 7 5800X sits at the 84th percentile among all tested CPUs, and its nearest rivals include the AMD Ryzen 7 5800 (0.3% higher average score) and the Intel Core i5-12600KF (0.8% lower). These margins are negligible in gaming terms, and the CPU's 32 MB of L3 cache plus dual-channel DDR4 memory bandwidth of 51.2 GB/s provide adequate support for Palworld's open-world asset streaming. The conclusion from the data is straightforward: the CPU is not the constraint here, and its capabilities are effectively wasted in this pairing at higher resolutions.

GPU Role

The AMD Radeon RX 570 is the definitive performance limiter in this configuration. Built on the Polaris 20 chip with GCN 4.0 architecture and a 14 nm process, this card features 2048 shading units, 128 texture mapping units, and 32 raster output units. Its clocks are modest, with a base of 1168 MHz and a boost of 1244 MHz, and it relies on 4 GB of GDDR5 memory across a 256-bit bus for 224.0 GB/s of bandwidth. These specifications translate to a measured FP32 throughput of 5.095 TFLOPS, which is simply insufficient for demanding modern titles at high resolutions.

The GPU's benchmark results place it at the 74th percentile among all GPUs, with an average score of 30158. Its nearest rivals include the NVIDIA GeForce RTX 5060 (0.2% higher) and the AMD Radeon RX 7700 XT (0.2% higher), though those comparisons are based on synthetic averages that don't reflect real gaming deltas. In Palworld specifically, the RX 570's limitations become apparent in the measured FPS: even at 1080p Ultra, it manages only 38 FPS, and at 4K Low it drops to 24.7 FPS. The card's 4 GB VRAM is likely a contributing factor at Ultra settings, where texture sets can exceed this capacity, forcing slower memory swaps.

The GPU's pixel rate of 39.81 GPixel/s and texture rate of 159.2 GTexel/s are the theoretical ceilings that explain the resolution scaling curve. At 4K, the card needs to fill over 8.3 million pixels per frame, and the data shows it can only sustain 14.5 FPS at Ultra, which is about 21% of the 1080p Ultra result. This nonlinear drop points to memory bandwidth saturation as a key issue, as the 224.0 GB/s figure is strained by higher resolution framebuffers.

Measured FPS Breakdown

The complete set of measured results provides a clear picture of what this combo can deliver. At 1920x1080, the average frame rates are 72.8 FPS on Low, 60.9 FPS on Medium, 46.7 FPS on High, and 38 FPS on Ultra. These figures show that 1080p is the only resolution where a consistent 60 FPS experience is achievable, and only on the Low preset. Medium settings come close at 60.9 FPS, but High and Ultra fall below the 60 FPS threshold.

Moving to 2560x1440, the averages drop to 46.5 FPS on Low, 37.8 FPS on Medium, 27.5 FPS on High, and 24.1 FPS on Ultra. None of these are smooth for fast-paced action, though Low and Medium might be tolerable for slower exploration. At 3840x2160, the situation becomes dire: 24.7 FPS on Low, 24.2 FPS on Medium, 18.6 FPS on High, and 14.5 FPS on Ultra. The 4K results are uniformly below playable thresholds, and the data suggests this resolution is not viable for this hardware in Palworld.

The differences between settings at the same resolution are consistent with GPU-bound behavior. At 1080p, the gap from Low to Ultra is 34.8 FPS, at 1440p it is 22.4 FPS, and at 4K it is 10.2 FPS. This diminishing gap with higher resolutions reinforces that the GPU is working at maximum capacity regardless of quality settings, so the absolute performance headroom is what shrinks.

How This Combo Ranks

This specific combination of the AMD Ryzen 7 5800X and AMD Radeon RX 570 ranks 1639 out of 1718 tested combos in Palworld. That places it in the bottom 5% of all configurations, which is consistent with the measured FPS data showing sub-60 FPS performance at most settings. The rank reflects that this pairing is significantly underpowered for the game's demands, particularly when compared to modern GPUs.

The ranking is driven almost entirely by the GPU, as the CPU's percentile standing (84th) is far higher than the combo's overall position. This mismatch is a clear signal that the RX 570 is the weak link. The data indicates that users with this CPU could achieve much better results by pairing it with a stronger graphics card, but within this specific combo, the performance ceiling is low.

FAQ

Q: What is the best resolution to play Palworld with this hardware?

A: 1920x1080 is the only resolution that provides playable frame rates. At Low settings, the average is 72.8 FPS, and at Medium it is 60.9 FPS. Higher resolutions like 2560x1440 and 3840x2160 all fall below 47 FPS even on Low.

Q: Is the Ryzen 7 5800X or the RX 570 the bottleneck?

A: The RX 570 is the clear bottleneck. The measured FPS drops linearly with resolution increases, which is a GPU-bound signature. The Ryzen 7 5800X has sufficient cores and clocks to handle the game's logic, but the GPU cannot keep up.

Q: Can this combo handle 4K gaming in Palworld?

A: No. At 3840x2160, the highest average FPS is 24.7 on Low settings, and it drops to 14.5 on Ultra. These results are well below smooth playability thresholds.

Q: What is the highest FPS achievable with this setup?

A: The highest measured average is 72.8 FPS at 1080p with Low settings. The next best is 60.9 FPS at 1080p on Medium, which is the highest setting that stays near the 60 FPS mark.

Q: How does this combo rank compared to other tested systems?

A: It ranks 1639 out of 1718 combinations, placing it in the bottom 5% of tested configs in Palworld. This rank is due to the GPU's limitations, not the CPU.

Q: Is the RX 570's 4 GB VRAM a problem for this game?

A: The data suggests it is a factor at higher settings. The large FPS drop from Medium to High at 1080p (60.9 to 46.7 FPS) may indicate VRAM pressure, and Ultra settings likely exceed the 4 GB capacity, contributing to the low 38 FPS result.

Settings Recommendations

Based on the measured rows, the optimal experience for this combo is 1080p with Medium settings, which delivers an average of 60.9 FPS. This preset balances visual quality and performance, staying just above the 60 FPS threshold that is generally considered smooth. The Low preset at 1080p offers the highest frame rate at 72.8 FPS, but the visual downgrade may not be worth the extra 11.9 FPS over Medium.

For users who prioritize visual fidelity over frame rate, 1080p High is a viable option at 46.7 FPS, though this falls below the 60 FPS mark and may result in noticeable stutter during busy scenes. The Ultra preset at 1080p is not recommended, as it yields only 38 FPS and likely introduces VRAM-related issues. At 1440p, only the Low preset (46.5 FPS) approaches playability, but even that is borderline, and all 4K settings should be avoided due to sub-25 FPS averages.

The data supports a clear hierarchy: 1080p Medium is the sweet spot, 1080p Low is for maximum smoothness, and 1080p High is a compromise for better visuals at reduced frame rates. Any resolution above 1080p sacrifices too much performance to be practical, and Ultra settings should be skipped entirely on this hardware.

Hardware Specifications

AMD Ryzen 7 5800X

Cores / Threads 8 / 16
Base Clock 3800 MHz
Boost Clock 4700 MHz
TDP 105W
Socket AMD Socket AM4
View Full CPU Details →

AMD Radeon RX 570

VRAM 4 GB GDDR5
Base Clock —
Boost Clock 1244 MHz MHz
TDP 150 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 7 5800X + AMD Radeon RX 570 in Palworld

Resolution Settings Avg FPS
3840x2160 Low 24.7
3840x2160 Medium 24.2
3840x2160 High 18.6
3840x2160 Ultra 14.5
2560x1440 Low 46.5
2560x1440 Medium 37.8
2560x1440 High 27.5
2560x1440 Ultra 24.1
1920x1080 Low 72.8
1920x1080 Medium 60.9
1920x1080 High 46.7
1920x1080 Ultra 38.0

Palworld with Ryzen 7 5800X + Other GPUs

See how Palworld performs with the same CPU but different graphics cards.

Palworld with RX 570 + Other CPUs

See how Palworld performs with the same GPU but different processors.

Other Games with Ryzen 7 5800X + RX 570

Explore FPS benchmarks for other games using this same hardware combination.