Palworld

Palworld

AVERAGE FPS
82
good

This combination provides smooth gameplay with an average of 82 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 29 38 49 61
1440p QHD 52 69 89 110
1080p Full HD 79 104 135 167

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 61
3840x2160 Medium 49
3840x2160 High 38
3840x2160 Ultra 29
2560x1440 Low 110
2560x1440 Medium 89
2560x1440 High 69
2560x1440 Ultra 52
1920x1080 Low 167
1920x1080 Medium 135
1920x1080 High 104
1920x1080 Ultra 79

Palworld with AMD Ryzen 7 3700X + AMD Radeon RX 9060, In-Depth Analysis

Palworld with the AMD Ryzen 7 3700X and AMD Radeon RX 9060 presents a clear performance profile: the GPU is the primary bottleneck at higher resolutions, while the CPU provides a solid foundation for high frame rates at 1080p. The measured data shows a system that is well-balanced for 1440p gaming, but struggles to maintain smooth gameplay at 4K Ultra settings. This analysis breaks down the measured FPS across all resolutions and settings, interprets the CPU and GPU roles based on their specifications and benchmark scores, and provides actionable recommendations for the best experience.

Resolution Scaling

The performance drop from 1080p to 4K is steep and clearly indicates that the AMD Radeon RX 9060 is the limiting factor at higher resolutions. At High settings, the average frame rate falls from 104 FPS at 1920x1080 to 69 FPS at 2560x1440, a significant 33.7% reduction. Moving to 3840x2160, the average FPS drops further to 38, which is a 63.5% decrease from the 1080p figure. This scaling pattern is characteristic of a GPU that is running out of pixel processing power, as the workload on the graphics card increases dramatically with resolution.

The data for Low settings reinforces this conclusion. At 1920x1080, the system achieves an average of 167 FPS. This high frame rate suggests that the CPU is capable of feeding the GPU with enough data to maintain a very high output. However, at 4K Low, the average FPS is 61. While this is a playable frame rate, the 63.5% drop from the 1080p Low result (from 167 to 61 FPS) demonstrates that even with reduced graphical fidelity, the GPU's compute and memory bandwidth limits are reached as the pixel count quadruples. The GPU's 8 GB of GDDR6 memory and 288.0 GB/s bandwidth are likely stretched thin at this resolution.

The scaling also shows that the Ryzen 7 3700X is not the primary bottleneck. If the CPU were the limiting factor, we would expect to see a smaller performance delta between 1080p and 1440p, as the GPU would still be waiting on the CPU. Instead, the consistent and large drop in FPS with each resolution increase points squarely at the Radeon RX 9060. The system's performance is highly resolution-dependent, meaning that for 4K gaming, users will need to make significant compromises in settings to achieve a smooth experience.

Settings Recommendations

The benchmark results indicate that the best experience for this combination of CPU and GPU is found at 2560x1440 with Medium settings. This configuration yields an average of 89 FPS, with a minimum of 76 FPS and a maximum of 103 FPS. This frame rate is well above the smoothness threshold for most players and provides a good balance between visual quality and performance. The 76 FPS minimum suggests that even in demanding scenes, the frame rate does not dip into unplayable territory.

At 1920x1080, the High preset is an excellent choice, delivering an average of 104 FPS. This is a significant improvement over the 79 FPS average at Ultra settings, and the visual difference between High and Ultra in Palworld is often not worth the 31.6% performance penalty. For users with high-refresh-rate monitors at 1080p, the Low preset at 167 FPS is the only option that can fully utilize such a display, but it comes with a substantial reduction in visual quality.

For 4K gaming, the data shows that the system is not capable of a "best experience" at the highest settings. The Ultra preset at 3840x2160 averages only 29 FPS, which is unplayable for most. The Low preset at 61 FPS is the only playable option at this resolution, but it requires a significant sacrifice in visual fidelity. Therefore, the recommended path is to prioritize 1440p Medium or 1080p High for a superior balance of performance and image quality. The 4K resolution should be reserved for static scenes or games where frame rate is less critical.

CPU Role

The AMD Ryzen 7 3700X, with its 8 cores and 16 threads based on the Zen 2 architecture, provides a robust foundation for Palworld. The processor's benchmark scores, such as a Geekbench multi-core score of 8899 and a Passmark multithread score of 22458, indicate strong multi-threaded capabilities, which are beneficial for a game that simulates a living world with many AI-driven creatures. The 3.60 GHz base and 4.40 GHz boost clocks are adequate for maintaining high frame rates, as evidenced by the 167 FPS average at 1080p Low settings.

The CPU's role becomes more apparent at lower resolutions. At 1920x1080, the GPU is less burdened, and the CPU must work harder to prepare frames. The high FPS figures at 1080p, particularly the 167 FPS at Low and 135 FPS at Medium, demonstrate that the Ryzen 7 3700X is not a bottleneck in these scenarios. Its performance is competitive, with a benchmark average score of 34260, placing it in the 84th percentile of all CPUs. This puts it in a similar league as the AMD Ryzen AI 7 350 (0.1% faster) and the Intel Core i5-13450HX (0.2% slower), showing it holds its own against newer processors.

However, the CPU's influence wanes as resolution increases. The data shows that the FPS drop from 1440p to 4K is almost entirely due to the GPU. The CPU's 32 MB of L3 cache and dual-channel DDR4 memory support are sufficient for the game's demands, and the processor does not appear to hold back the Radeon RX 9060 at higher resolutions. The system is well-balanced, but the CPU is the component with headroom to spare, as it only becomes a potential limiting factor when targeting extremely high frame rates at 1080p.

FAQ

Q: What is the best resolution and settings combination for this system?

A: The data shows that the optimal balance is at 2560x1440 with Medium settings, which yields an average of 89 FPS and a minimum of 76 FPS. This provides a smooth experience without the performance penalty of higher settings.

Q: Can this system play Palworld at 4K?

A: Yes, but only at lower settings. At 4K Low, the average FPS is 61. The High preset drops to 38 FPS, and Ultra falls to 29 FPS, which are not considered playable for a smooth experience.

Q: Is the CPU or GPU the bottleneck in this system?

A: The GPU is the primary bottleneck at higher resolutions. The FPS drops significantly from 1080p to 4K, indicating the Radeon RX 9060 is struggling with the increased pixel load. The CPU is more of a limiting factor only at very high frame rates at 1080p.

Q: How does the Ryzen 7 3700X compare to its rivals?

A: The Ryzen 7 3700X has an average benchmark score of 34260. This is 0.1% faster than the AMD Ryzen AI 7 350 and 0.2% slower than the Intel Core i5-13450HX, indicating it is a highly competitive processor in its class.

Q: What is the performance difference between High and Ultra settings at 1080p?

A: At 1920x1080, the High preset averages 104 FPS, while the Ultra preset averages 79 FPS. This is a 31.6% performance increase for High, making it the better choice for a smoother experience.

Q: Is the 8 GB of VRAM on the GPU a concern?

A: The data suggests it can be a limiting factor at 4K. The significant frame rate drops at 4K, even at Low settings, are likely influenced by the GPU's 8 GB memory capacity and 288.0 GB/s bandwidth, which may be insufficient for the game's texture and geometry demands at that resolution.

GPU Role

The AMD Radeon RX 9060 is the central figure in this performance analysis, and its capabilities define the system's limits. The measured FPS data shows that the GPU is the main driver of performance across all tested configurations. At 1080p, the GPU is able to produce high frame rates, but its performance degrades rapidly as resolution increases. The GPU's average benchmark score of 16014 places it in the 59th percentile of all GPUs, making it a mid-range performer. It is closely matched with the NVIDIA GeForce RTX 3060 Ti, which is 0.7% faster, and the AMD Radeon RX 7700, which is 1% slower.

The GPU's specifications, including a boost clock of 2990 MHz and a game clock of 2400 MHz, provide a solid foundation for 1080p and 1440p gaming. However, the 8 GB of GDDR6 memory on a 128-bit bus, providing 288.0 GB/s of bandwidth, is a limiting factor at higher resolutions. The data shows a steep drop in performance at 4K, with the High preset averaging 38 FPS and the Ultra preset at 29 FPS. This suggests that the GPU's memory subsystem and compute units are overwhelmed by the demands of 4K rendering.

The GPU's role is best summarized by its performance scaling. At 1080p High, it achieves 104 FPS. At 1440p High, it achieves 69 FPS. At 4K High, it achieves 38 FPS. This consistent and significant drop with each resolution step confirms that the RDNA 4.0 architecture is not designed for high-end 4K gaming. The GPU's strength is in delivering high refresh rates at 1080p and solid 60+ FPS experiences at 1440p, as seen with the 89 FPS average at 1440p Medium. The RX 9060 is a capable card for its target market, but it has clear limitations that must be respected.

Measured FPS Breakdown

This section provides a detailed breakdown of all measured average FPS values from the data set.

1920x1080:

  • Ultra: The average FPS is 79.
  • High: The average FPS is 104.
  • Medium: The average FPS is 135, with a minimum of 115 and a maximum of 156.
  • Low: The average FPS is 167.

2560x1440:

  • Ultra: The average FPS is 52.
  • High: The average FPS is 69.
  • Medium: The average FPS is 89, with a minimum of 76 and a maximum of 103.
  • Low: The average FPS is 110.

3840x2160:

  • Ultra: The average FPS is 29.
  • High: The average FPS is 38.
  • Medium: The average FPS is 49, with a minimum of 42 and a maximum of 57.
  • Low: The average FPS is 61.

The data confirms a clear hierarchy. The highest performance is at 1080p Low, achieving 167 FPS. From there, performance scales down with increased resolution and graphical settings. The lowest performance is at 4K Ultra, with only 29 FPS. The differences between settings at each resolution are substantial, with the jump from Low to Ultra typically costing more than half the frame rate. For example, at 1440p, the difference between Low (110 FPS) and Ultra (52 FPS) is a 52.7% reduction in performance. This data emphasizes the importance of settings management to achieve a playable experience, particularly at higher resolutions.

Hardware Specifications

AMD Ryzen 7 3700X

Cores / Threads 8 / 16
Base Clock 3600 MHz
Boost Clock 4400 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

AMD Radeon RX 9060

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 2990 MHz MHz
TDP 132 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 7 3700X + AMD Radeon RX 9060 in Palworld

Resolution Settings Avg FPS
3840x2160 Low 61.0
3840x2160 Medium 49.0
3840x2160 High 38.0
3840x2160 Ultra 29.0
2560x1440 Low 110.0
2560x1440 Medium 89.0
2560x1440 High 69.0
2560x1440 Ultra 52.0
1920x1080 Low 167.0
1920x1080 Medium 135.0
1920x1080 High 104.0
1920x1080 Ultra 79.0

Palworld with Ryzen 7 3700X + Other GPUs

See how Palworld performs with the same CPU but different graphics cards.

Palworld with RX 9060 + Other CPUs

See how Palworld performs with the same GPU but different processors.

Other Games with Ryzen 7 3700X + RX 9060

Explore FPS benchmarks for other games using this same hardware combination.