Palworld

Palworld

AVERAGE FPS
106
good

This combination provides smooth gameplay with an average of 106 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 36 51 62 80
1440p QHD 65 90 113 142
1080p Full HD 102 137 177 214

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 80
3840x2160 Medium 62
3840x2160 High 51
3840x2160 Ultra 36
2560x1440 Low 142
2560x1440 Medium 113
2560x1440 High 90
2560x1440 Ultra 65
1920x1080 Low 214
1920x1080 Medium 177
1920x1080 High 137
1920x1080 Ultra 102

Palworld with AMD Ryzen 5 7600X + NVIDIA GeForce RTX 3070 Ti, In-Depth Analysis

The data for Palworld on the AMD Ryzen 5 7600X and NVIDIA GeForce RTX 3070 Ti reveals a configuration that scales predictably with resolution, but with some notable shifts in the relationship between CPU and GPU load. The measured frames per second (FPS) across the three resolutions and four quality presets offer a clear picture of where this combo excels and where it begins to strain.

Resolution Scaling

The progression from 1920x1080 to 3840x2160 shows a dramatic and consistent drop in frame rates, which is the expected behavior for a high-fidelity title. At the Low preset, the average FPS falls from 213.7 at 1080p to 141.9 at 1440p, and then to 80.0 at 4K. This represents a 33.6% reduction from 1080p to 1440p, and a further 43.6% reduction from 1440p to 4K. The scaling is steeper at higher settings, with the Ultra preset dropping from 102.4 FPS at 1080p to 64.9 FPS at 1440p (a 36.6% decrease) and then to 36.3 FPS at 4K (a 44.1% decrease from 1440p).

This pattern suggests that the RTX 3070 Ti becomes the primary limiting factor as resolution increases. The GPU's 8 GB of GDDR6X memory and 608.3 GB/s bandwidth are being pushed harder at 4K, particularly on the Ultra preset where the average FPS of 36.3 is below the 60 FPS threshold commonly considered smooth gameplay. The fact that the 1080p Low preset achieves 213.7 FPS indicates that the CPU is capable of feeding the GPU far more frames than it can render at higher resolutions. The data implies that at 1080p, the system is likely CPU-bound or balanced, but by 4K, the GPU is unequivocally the bottleneck, as evidenced by the steep FPS drops that align with increased pixel count rather than any change in CPU workload.

FAQ

Q: What is the highest average FPS this combo achieves in Palworld?

A: The highest measured average is 213.7 FPS, which occurs at 1920x1080 resolution with the Low settings preset.

Q: Can this system maintain 60 FPS at 4K resolution?

A: At 4K with Medium settings, the average FPS is 62.0, which is just above 60. However, at High settings it drops to 51.1 FPS, and at Ultra it falls to 36.3 FPS, indicating that only the Medium preset reliably exceeds 60 FPS at this resolution.

Q: How does the CPU's multi-threaded performance compare to its direct rivals?

A: The Ryzen 5 7600X has an average benchmark score of 26272. Its nearest rival, the AMD Ryzen 7 PRO 6850U, scores 26262, which is a 0% difference. The Ryzen 7 7735U scores 26305, putting it 0.1% ahead, while the AMD Ryzen 5 PRO 5655GE is 0.2% ahead with a score of 26320. The AMD Ryzen 7 5700X scores 26214, which is 0.2% behind.

Q: What is the difference in FPS between the Low and Ultra presets at 1440p?

A: At 2560x1440, the Low preset delivers an average of 141.9 FPS, while the Ultra preset delivers 64.9 FPS. This is a difference of 77.0 FPS, or approximately 54.3% fewer frames on the Ultra setting.

Q: Does the GPU's benchmark score place it above or below the average of its nearest rivals?

A: The RTX 3070 Ti has an average benchmark score of 30849. It is 0.3% ahead of the AMD Radeon RX 590 GME (30755) and 0.8% behind the AMD Radeon RX 6700 (31112). It also trails the NVIDIA Quadro M5000 (31142) by 0.9% and the NVIDIA GRID M60-1Q (31220) by 1.2%.

Q: How does the combo's overall rank in Palworld compare to the total number of tested configurations?

A: This specific combo is ranked 670 out of 1718 total tested combinations for Palworld, placing it in the upper-middle portion of the database.

CPU Role

The AMD Ryzen 5 7600X is a 6-core, 12-thread processor based on the Zen 4 architecture, running on the AMD Socket AM5 platform. Its base clock is 4.70 GHz, and it boosts up to 5.30 GHz. In synthetic benchmarks, it demonstrates strong single-thread performance with a 3dmark single-thread score of 1060 and a Cinebench R23 single-core score of 3406. Its multi-threaded capabilities are also substantial, with a Cinebench R23 multi-core score of 24128 and a Passmark multithread score of 28390.

In the context of Palworld, these specifications translate to high frame rates at lower resolutions. The 1080p Low preset result of 213.7 FPS suggests that the CPU's single-thread performance is sufficient to drive the game engine to very high frame rates without being a bottleneck. The 12 threads also help with background tasks and the game's simulation logic, which is common in survival games. The CPU's percentile ranking of 83 among all CPUs indicates it is a capable processor, and its benchmark scores are nearly identical to its nearest rivals, with deltas ranging from -0.2% to +0.2%. This means that in terms of raw processing power, the 7600X is on par with the Ryzen 7 5700X, though the newer architecture and higher boost clock may contribute to better frame pacing in games. The data shows that as resolution increases, the CPU's role diminishes, as the FPS drops align more with GPU load than with CPU capabilities.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend heavily on the target resolution and desired frame rate. At 1920x1080, all presets deliver playable frame rates, with even the Ultra preset achieving 102.4 FPS. For a high-refresh-rate monitor, the High preset at 136.9 FPS offers a good balance between visual fidelity and smoothness, while the Medium preset at 177.3 FPS is preferable for competitive play.

At 2560x1440, the High preset provides 89.5 FPS, which is a solid experience for most players. The Medium preset at 113.1 FPS is also excellent, and it would be the recommended choice for those seeking higher frame rates without a significant visual sacrifice. The Ultra preset at 64.9 FPS is still playable, but it edges closer to the threshold where frame drops become noticeable.

At 3840x2160, the choices are more constrained. The Medium preset at 62.0 FPS is the only setting that stays above 60 FPS, making it the recommended default for 4K. The High preset at 51.1 FPS is acceptable for slower-paced gameplay, but the Ultra preset at 36.3 FPS is likely too demanding for a smooth experience. The data suggests that players should prioritize the Medium preset at 4K to maintain a consistent frame rate.

How This Combo Ranks

The Palworld benchmark data places this combination of the AMD Ryzen 5 7600X and NVIDIA GeForce RTX 3070 Ti at rank 670 out of 1718 tested combos. This puts it in the 61st percentile of all configurations, meaning that roughly 39% of tested systems perform better in this game. This ranking is a holistic measure that considers the balance between CPU and GPU, and the raw FPS numbers confirm that this is a mid-to-high-tier setup.

The rank is likely influenced by the fact that while the CPU is strong, the GPU is not in the top tier of available hardware. The RTX 3070 Ti's percentile rank of 74 among all GPUs and its average benchmark score of 30849, which is only slightly above the Radeon RX 590 GME, suggest that it is a capable but not flagship-level card. In contrast, the CPU's percentile rank of 83 is higher, indicating that the processor is relatively stronger than the graphics card. This imbalance means that at lower resolutions, the system is likely held back by the GPU, while at higher resolutions, the GPU becomes even more of a limiting factor. The rank of 670 reflects a system that can handle Palworld well at 1080p and 1440p, but struggles to maintain high frame rates at 4K with maximum settings.

Measured FPS Breakdown

At 1920x1080, the average FPS ranges from 213.7 on Low to 102.4 on Ultra. The Medium preset yields 177.3 FPS, and the High preset yields 136.9 FPS. The scaling from Low to Medium is a 17.0% drop, from Medium to High is a 22.8% drop, and from High to Ultra is a 25.2% drop.

At 2560x1440, the average FPS is 141.9 on Low, 113.1 on Medium, 89.5 on High, and 64.9 on Ultra. The differences are more compressed than at 1080p, with a 20.3% drop from Low to Medium, a 20.9% drop from Medium to High, and a 27.5% drop from High to Ultra.

At 3840x2160, the average FPS is 80.0 on Low, 62.0 on Medium, 51.1 on High, and 36.3 on Ultra. The percentage drops are 22.5% from Low to Medium, 17.6% from Medium to High, and 29.0% from High to Ultra. The absolute differences become smaller at 4K, but the relative impact of the Ultra preset is the most severe, reinforcing that the GPU is saturated at this resolution.

GPU Role

The NVIDIA GeForce RTX 3070 Ti is built on the Ampere architecture and features 6144 shading units, 192 texture mapping units, and 96 raster output pipelines. It has 48 ray tracing cores and 192 tensor cores, with a base clock of 1575 MHz and a boost clock of 1770 MHz. The GPU is equipped with 8 GB of GDDR6X memory on a 256-bit bus, providing a bandwidth of 608.3 GB/s.

In Palworld, the GPU's role is critical, especially at higher resolutions. The 8 GB VRAM buffer is sufficient for 1080p and 1440p at all presets, but the data suggests it may be a limiting factor at 4K Ultra, where the average FPS drops to 36.3. The memory bandwidth of 608.3 GB/s is a key specification for texture-heavy scenes, and the game's survival genre often involves large open environments that stress memory throughput. The GPU's compute capabilities, measured at 21.75 TFLOPS for FP32, are substantial, but the benchmark results show that they are not enough to maintain high frame rates at 4K with the highest settings. The GPU's percentile rank of 74 indicates it performs better than most, but its nearest rivals in the database, such as the AMD Radeon RX 6700, are within a 1% margin, suggesting that the 3070 Ti is not significantly ahead of its immediate competition in raw benchmark terms. In practice, the measured FPS shows that the GPU is the primary driver of performance differences across the settings presets, with the CPU providing enough headroom to avoid becoming a bottleneck until the very high frame rates seen at 1080p Low.

Hardware Specifications

AMD Ryzen 5 7600X

Cores / Threads 6 / 12
Base Clock 4700 MHz
Boost Clock 5300 MHz
TDP 105W
Socket AMD Socket AM5
View Full CPU Details →

NVIDIA GeForce RTX 3070 Ti

VRAM 8 GB GDDR6X
Base Clock —
Boost Clock 1770 MHz MHz
TDP 290 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 7600X + NVIDIA GeForce RTX 3070 Ti in Palworld

Resolution Settings Avg FPS
3840x2160 Low 80.0
3840x2160 Medium 62.0
3840x2160 High 51.1
3840x2160 Ultra 36.3
2560x1440 Low 141.9
2560x1440 Medium 113.1
2560x1440 High 89.5
2560x1440 Ultra 64.9
1920x1080 Low 213.7
1920x1080 Medium 177.3
1920x1080 High 136.9
1920x1080 Ultra 102.4

Palworld with Ryzen 5 7600X + Other GPUs

See how Palworld performs with the same CPU but different graphics cards.

Palworld with RTX 3070 Ti + Other CPUs

See how Palworld performs with the same GPU but different processors.

Other Games with Ryzen 5 7600X + RTX 3070 Ti

Explore FPS benchmarks for other games using this same hardware combination.