Palworld

Palworld

AVERAGE FPS
110
good

This combination provides smooth gameplay with an average of 110 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 39 51 66 82
1440p QHD 70 92 120 148
1080p Full HD 106 140 182 224

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 82
3840x2160 Medium 66
3840x2160 High 51
3840x2160 Ultra 39
2560x1440 Low 148
2560x1440 Medium 120
2560x1440 High 92
2560x1440 Ultra 70
1920x1080 Low 224
1920x1080 Medium 182
1920x1080 High 140
1920x1080 Ultra 106

Palworld with AMD Ryzen 5 7600 + AMD Radeon RX 7800 XT, In-Depth Analysis

Palworld presents a demanding open-world survival workload, and the pairing of the AMD Ryzen 5 7600 with the AMD Radeon RX 7800 XT delivers a compelling, though resolution-sensitive, experience. The data shows a system that can push high refresh rates at 1080p but begins to buckle under the load of 4K Ultra settings, revealing a clear GPU bottleneck at higher resolutions.

Resolution Scaling

The measured frames per second (FPS) data across three resolutions paints a clear picture of how this combo scales. At 1920x1080 with High settings, the system achieves an average of 140 FPS. Moving to 2560x1440 at the same High preset, the average drops to 92 FPS, a significant 34% reduction. Pushing further to 3840x2160 at High settings yields just 51 FPS, which is a 64% drop from the 1080p figure. This steep decline indicates that the graphics card is the primary limiting factor as pixel count increases.

The scaling pattern is even more pronounced when looking at the Ultra settings. The system manages 106 FPS at 1080p Ultra, but this falls to 70 FPS at 1440p and plummets to 39 FPS at 4K. The 4K Ultra result is below the threshold for smooth, consistent gameplay, suggesting that this combination is not suited for maximum fidelity at the highest resolution. Conversely, the Low preset shows remarkable headroom, with 224 FPS at 1080p, 148 FPS at 1440p, and 82 FPS at 4K, demonstrating that the hardware can easily handle lower graphical loads.

The relationship between resolutions reveals that the GPU's performance scales consistently with the number of pixels. The 1440p results appear to be the sweet spot for this pairing, balancing visual quality with playable frame rates. At 1440p High, the 92 FPS average is smooth, and even Medium settings provide 120 FPS. The data suggests that while 1080p delivers high refresh rates, the system's true potential for a high-fidelity experience is best realized at 1440p, where the GPU is still able to maintain high performance without being as heavily constrained as it is at 4K.

CPU Role

The AMD Ryzen 5 7600 is a 6-core, 12-thread processor based on the Zen 4 architecture. With a base clock of 3.80 GHz and a boost clock of 5.10 GHz, its single-threaded performance is strong, as evidenced by a 3dmark_single_thread score of 999. In Palworld, a game that relies heavily on physics and world simulation, this core strength is crucial. The benchmark results indicate that at 1080p, where the GPU is less burdened, the CPU is able to feed frames efficiently, allowing the system to reach 224 FPS on Low settings. This high frame rate at a low graphical load suggests that the CPU is not the primary bottleneck in this configuration.

The processor's multi-threaded capabilities are also substantial, with a 3dmark_max_threads score of 6503 and a Cinebench R23 multicore score of 12735. In a game like Palworld, which can involve numerous AI-driven creatures and base-building mechanics, this multi-threaded headroom helps maintain consistent performance. However, the data shows that as resolution increases, the CPU's role diminishes relative to the GPU. The frame rate drop from 140 FPS at 1080p High to 51 FPS at 4K High is far more attributable to the GPU's rendering load than to the CPU's processing power. The CPU's performance is consistent; it's the GPU that changes the outcome.

Comparing to its nearest rivals, the Ryzen 5 7600 has an average benchmark score of 26324. This places it just 0.2% ahead of the AMD Ryzen 9 6900HX (26274) and 0.4% ahead of the Intel Core i9-11900KF (26212). It trails the AMD Ryzen 7 7435HS by a negligible 0.3% (26402). These marginal differences in synthetic benchmarks suggest that the Ryzen 5 7600's gaming performance is very much in line with these other options, and none of them would be a deciding factor in Palworld's frame rates compared to the GPU.

Settings Recommendations

The measured data provides a clear guide for optimizing the experience. For players targeting 1080p, the High preset at 140 FPS is excellent, but the Ultra preset at 106 FPS is also highly playable and offers enhanced visuals. The data shows that the jump from High to Ultra at 1080p costs about 24% in performance, which might be a worthwhile trade for increased fidelity on a high-refresh-rate monitor.

At 1440p, the High preset stands out as the best balance. The 92 FPS average is smooth, and the visual quality is strong. The Medium preset offers a higher 120 FPS, but the step down in graphical detail may not be necessary given that High is already above the 60 FPS threshold. The Ultra preset at 1440p drops to 70 FPS, which is still playable but shows that the GPU is starting to feel the strain. For a mix of visual quality and performance, 1440p High is the recommended choice.

At 4K, the options are more constrained. The High preset yields 51 FPS, which is just below the ideal 60 FPS target, while the Medium preset provides 66 FPS with a minimum of 56 FPS, making it the only 4K setting that consistently stays above the 60 FPS line. The Ultra preset's 39 FPS is not recommended for a smooth experience. Therefore, for 4K gameplay, the Medium preset is the only viable option for maintaining a reasonable frame rate. The Low preset at 4K provides 82 FPS, but the significant loss in visual quality makes it a less desirable choice than Medium.

How This Combo Ranks

Within the benchmark database, this specific combination of the AMD Ryzen 5 7600 and AMD Radeon RX 7800 XT ranks 1241 out of 3711 tested combos for Palworld. This places the pairing in the top third of all system configurations tested, indicating that it is a strong performer for this title. The rank is a holistic measure that takes into account all measured resolutions and settings, reflecting the system's overall capability.

This ranking suggests that the combo is more powerful than the average tested system, but it is not at the very top tier. The 4K Ultra result, which is a significant outlier in terms of performance, likely prevents a higher ranking. The system's strong 1080p and 1440p performance, however, ensures it sits comfortably above the median. The data indicates that while this is not an absolute top-end enthusiast setup, it is a highly capable one that will deliver a great experience for most players, particularly those on 1440p monitors.

The ranking also contextualizes the balance of the components. A system with a more powerful GPU might rank higher due to better 4K performance, while a system with a less powerful CPU might rank lower in CPU-bound scenarios. The 1241st position out of 3711 reflects a well-rounded pairing that excels at lower and medium resolutions but is ultimately limited by the GPU at the highest settings.

GPU Role

The AMD Radeon RX 7800 XT is the dominant component in this pairing for Palworld's visual output. Its 16 GB of GDDR6 memory on a 256-bit bus provides a substantial 624.1 GB/s of bandwidth, which is essential for handling the game's detailed textures at higher resolutions. The GPU's performance in synthetic benchmarks is strong, with a Passmark G3D score of 24176, but its gameplay data reveals a more nuanced story.

The GPU's clock speeds are notable, with a boost clock of 2430 MHz and a game clock of 2124 MHz. These high clocks contribute to its strong performance at 1080p, where it can push well beyond 200 FPS on lower presets. However, the data shows that the GPU's capabilities are quickly saturated as resolution increases. The transition from 1080p High (140 FPS) to 1440p High (92 FPS) and then to 4K High (51 FPS) demonstrates a clear performance ceiling that is tied to the GPU's rendering power.

The 16 GB VRAM capacity is a forward-looking feature. While the data doesn't show a specific VRAM limitation at these settings, the high memory bandwidth and capacity suggest that the card is well-prepared for future titles or higher-resolution texture packs. In comparison to its nearest rivals, the RX 7800 XT has an average benchmark score of 11627. This is 0.5% higher than the NVIDIA GeForce GTX 1660 (11680) and 0.9% higher than the AMD Radeon Pro 5500M (11528). These comparisons are based on aggregate scores, but in Palworld, the 7800 XT's actual performance is what determines the frame rates, and the data shows it is the clear limiting factor at 4K.

FAQ

Q: What is the best resolution for this CPU and GPU combo in Palworld?

A: The data strongly suggests 2560x1440 is the ideal resolution. At High settings, it achieves 92 FPS, which balances visual quality and performance. While 1080p delivers higher frame rates, 1440p provides a more immersive experience without dropping below playable thresholds.

Q: Can this system handle Palworld at 4K?

A: Yes, but with significant compromises. At 4K Medium settings, the system averages 66 FPS with a minimum of 56 FPS, which is playable. However, the High preset drops to 51 FPS, and the Ultra preset falls to 39 FPS, both of which are below the ideal smoothness threshold.

Q: Is the CPU or GPU the main bottleneck in this system for Palworld?

A: The GPU is the primary bottleneck at higher resolutions. The frame rate drops significantly from 1080p to 4K, while the CPU's performance remains consistent. The CPU is capable of high frame rates, as shown by the 224 FPS result at 1080p Low, but the GPU cannot maintain that performance as pixel count increases.

Q: How does this combo rank compared to other tested systems?

A: It ranks 1241 out of 3711 tested combinations for Palworld. This places it in the top third of all systems, indicating it is a strong performer, though not at the absolute top tier.

Q: What settings preset should be used for a 1440p monitor?

A: The High preset is recommended. It provides an average of 92 FPS, which is smooth. The Medium preset offers 120 FPS, but the High preset offers a better visual experience with only a 23% performance penalty.

Q: Does the CPU's multi-threading capability have a significant impact on Palworld performance?

A: Yes, the Ryzen 5 7600's 12 threads are beneficial. Its multi-threaded score of 6503 in 3dmark_max_threads helps ensure consistent performance during complex gameplay scenarios with many AI entities, although the overall frame rate is more heavily influenced by the GPU.

Hardware Specifications

AMD Ryzen 5 7600

Cores / Threads 6 / 12
Base Clock 3800 MHz
Boost Clock 5100 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

AMD Radeon RX 7800 XT

VRAM 16 GB GDDR6
Base Clock —
Boost Clock 2430 MHz MHz
TDP 263 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 7600 + AMD Radeon RX 7800 XT in Palworld

Resolution Settings Avg FPS
3840x2160 Low 82.0
3840x2160 Medium 66.0
3840x2160 High 51.0
3840x2160 Ultra 39.0
2560x1440 Low 148.0
2560x1440 Medium 120.0
2560x1440 High 92.0
2560x1440 Ultra 70.0
1920x1080 Low 224.0
1920x1080 Medium 182.0
1920x1080 High 140.0
1920x1080 Ultra 106.0

Palworld with Ryzen 5 7600 + Other GPUs

See how Palworld performs with the same CPU but different graphics cards.

Palworld with RX 7800 XT + Other CPUs

See how Palworld performs with the same GPU but different processors.

Other Games with Ryzen 5 7600 + RX 7800 XT

Explore FPS benchmarks for other games using this same hardware combination.