Palworld

Palworld pairs the AMD Ryzen 5 7500F with the AMD Radeon RX 580, creating a combination where the GPU is the clear limiting factor at every resolution tested. The data shows a 6-core, 12-thread Zen 4 processor driving a Polaris-based graphics card that sits at the 53rd percentile among all GPUs, and the measured frame rates reflect this imbalance. Across all settings, the RX 580 struggles to maintain playable performance at higher resolutions, while the CPU’s headroom goes largely unused.

Resolution Scaling

The frame rate drop from 1080p to 4K is steep and consistent, revealing a GPU-bound scenario. At High settings, the average FPS falls from 48.7 at 1920x1080 to 35.3 at 2560x1440, then plunges to 19.1 at 3840x2160. That represents a 27.5% decline from 1080p to 1440p, followed by a 45.9% further drop from 1440p to 4K. The trend is similar at Low settings, where 81.1 FPS at 1080p becomes 52.2 at 1440p and 32.8 at 4K.

The scaling pattern indicates that the RX 580’s 256-bit memory bus and 256.0 GB/s bandwidth are saturated early. At 4K Ultra, the combination manages only 11.7 FPS, which is a 69.7% reduction from the 1080p Ultra result of 38.5 FPS. The GPU’s 32 ROPs and 6.175 TFLOPS of FP32 compute are simply insufficient for Palworld’s rendering load at high pixel counts. Conversely, the Ryzen 5 7500F’s single-thread score of 974 in 3DMark and multi-thread score of 6379 in the max-thread test suggest it is not the bottleneck; the FPS curve tracks GPU load, not CPU capability.

FAQ

Q: What is the best resolution for this combo in Palworld?

A: The data shows 1920x1080 as the only viable option for smooth gameplay. At Low settings, the average FPS reaches 81.1, while Medium achieves 66.5 and High hits 48.7. All 1440p results fall below 53 FPS, and 4K results are largely unplayable.

Q: How much performance is lost when moving from 1080p to 1440p?

A: At High settings, average FPS drops from 48.7 to 35.3, a 27.5% reduction. At Low settings, the drop is from 81.1 to 52.2, a 35.6% reduction. The GPU becomes progressively more stressed as pixel count increases.

Q: Is the Ryzen 5 7500F holding back the RX 580 in this game?

A: Benchmark results indicate no. The CPU’s 3DMark single-thread score of 974 and Cinebench R23 multi-core score of 22799 place it far above the GPU’s needs. The FPS differences between settings at the same resolution are large, which is a signature of GPU limitation.

Q: What is the playable setting at 1080p?

A: Based on the measured FPS, Medium settings at 66.5 FPS and High settings at 48.7 FPS are both playable. Ultra drops to 38.5 FPS, which is borderline, while Low at 81.1 FPS offers the smoothest experience.

Q: How does this combo rank against other tested combinations?

A: It ranks 1600th out of 1718 combos in Palworld, placing it in the bottom 7% of all tested systems. This is consistent with the RX 580’s low percentile ranking.

Q: Does the RX 580 support modern APIs needed for Palworld?

A: Yes, the GPU supports DirectX 12 (12_0), OpenGL 4.6, and Vulkan 1.3. However, its DirectX 12 benchmark score of 43 in PassMark is low, reflecting weak tessellation and async compute performance.

CPU Role

The Ryzen 5 7500F is a modern 6-core, 12-thread processor built on TSMC’s 5 nm process, with a base clock of 3.70 GHz and a boost clock of 5.00 GHz. Its 32 MB of shared L3 cache and dual-channel DDR5 support with 83.2 GB/s bandwidth provide ample memory throughput for Palworld’s open-world simulation. The CPU’s 82nd percentile ranking among all CPUs, with an average benchmark score of 24993, puts it in the upper tier of processors.

In Palworld specifically, the CPU’s role is minimal given the GPU bottleneck. The 3DMark 2-thread score of 1902 and single-thread score of 974 indicate strong per-core performance, which is critical for the game’s physics and AI calculations. However, the measured FPS does not change dramatically with CPU-affecting settings; the differences are almost entirely attributable to GPU load. The CPU’s Cinebench R23 multi-core score of 22799 suggests it could handle far more demanding workloads, but the RX 580’s compute ceiling prevents it from being utilized.

The processor’s 65 W TDP and unlocked multiplier indicate efficiency and overclocking potential, but neither matters here. The data shows that at 1080p Low, the FPS of 81.1 is likely near the GPU’s maximum render rate, while the CPU idles with headroom. At 4K Ultra, the CPU is unquestionably waiting on the GPU, as the 11.7 FPS result is far below what the Ryzen 5 7500F could produce.

How This Combo Ranks

The combination of the Ryzen 5 7500F and RX 580 ranks 1600th out of 1718 tested combos in Palworld, placing it in the bottom 7% of all systems. This poor ranking is directly attributable to the GPU, which sits at the 53rd percentile among all GPUs with an average benchmark score of 13559. The CPU, by contrast, is at the 82nd percentile, creating a massive imbalance.

The RX 580’s nearest rivals in the benchmark database include the NVIDIA GeForce GTX 570 with a delta of 0%, the GeForce GTX 950 at 0.1% faster, and the AMD Radeon Pro 455 at 1.1% faster. These are all older or lower-tier cards, confirming the RX 580’s position as a legacy entry. The CPU’s nearest rivals, such as the Intel Core i7-11850H and AMD Ryzen 9 6900HX, are within 0.4% of its average score, showing that the processor is competitive with modern mid-range parts.

The rank of 1600 out of 1718 means that only 118 combos perform worse in Palworld. This is not surprising given that the RX 580 is end-of-life, having been released in 2017, and its 8 GB of GDDR5 memory at 2000 MHz is now considered entry-level. The combo’s ranking would be significantly higher if the GPU were replaced with a modern part, but as configured, it is a low-end gaming system.

Measured FPS Breakdown

At 1920x1080, the resolution where the combo performs best, the average FPS ranges from 81.1 at Low settings to 38.5 at Ultra. The progression is: Low 81.1, Medium 66.5, High 48.7, Ultra 38.5. The step from Low to Medium is a 14.6 FPS drop, while the step from High to Ultra is a 10.2 FPS drop. All of these results are playable, though Ultra approaches the threshold where frame pacing becomes noticeable.

Moving to 2560x1440, performance degrades significantly. Low settings yield 52.2 FPS, Medium drops to 44.9, High to 35.3, and Ultra to 23.8. The gap between Low and Ultra is 28.4 FPS, representing a 54.4% reduction. Even at Low, the 1440p result is below the 1080p High result, illustrating the GPU’s limited fill rate.

At 3840x2160, the combo becomes largely unplayable. Low settings produce 32.8 FPS, Medium 22.1, High 19.1, and Ultra 11.7. The Ultra result is a slideshow, and even Low is below 33 FPS. The 4K data confirms that the RX 580’s 256.0 GB/s bandwidth and 42.88 GPixel/s pixel rate are insufficient for Palworld’s foliage-heavy environments. The measured FPS at 4K High (19.1) is less than half of the 1080p High result (48.7), showing a 60.8% loss. This breakdown demonstrates that the combo is only suitable for 1080p gaming, and even then, users must choose between visual fidelity and frame rate.