Palworld

Palworld places the AMD Ryzen 5 5600X and NVIDIA GeForce RTX 2060 combination in a specific performance tier, where the measured frame rates reveal a system that is consistently capable at 1080p but increasingly strained at higher resolutions. The data indicates a pairing where the CPU provides a solid foundation, yet the GPU becomes the primary determinant of playability as graphical demands escalate.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 5 5600X is a 6-core, 12-thread processor built on the Zen 3 (Vermeer) architecture, using a 7 nm process from TSMC. It operates with a base clock of 3.70 GHz and a boost clock of 4.60 GHz, with a 65 W TDP. This configuration is well-suited for the threading demands of a survival game like Palworld, which relies on a mix of simulation, world streaming, and AI logic. The processor’s 32 MB of L3 cache and dual-channel DDR4 memory support (with 51.2 GB/s bandwidth) contribute to its ability to feed the GPU with data without becoming a bottleneck in most scenarios.

In synthetic benchmarks, this CPU scores 18,578 points in Cinebench R23 multi-core and 2,622 points in single-core. These scores place it in the 78th percentile of all CPUs, with an average benchmark score of 20,680. Compared to its nearest rivals, the Ryzen 5 5600X sits within a tight performance band: it trails the AMD Ryzen 5 5600GT by a negligible 0.3% and the Intel Core i7-10700 by the same margin, while leading the Intel Xeon 6325P by 0.7%. This indicates that the CPU’s processing power is neither a standout strength nor a weak link in this pairing.

For Palworld’s measured results, the CPU’s role is most evident at lower resolutions where the GPU has headroom. At 1080p with Low settings, the system achieves 140 FPS, which is the highest measured average across all configurations. This suggests that the Ryzen 5 5600X can sustain high frame delivery when the graphical load is light. However, the data also shows that as resolution increases, the CPU’s influence wanes, and the GPU becomes the limiting factor. The processor’s 12 threads and 4.60 GHz boost clock are sufficient to avoid severe frame dips, but the system’s overall ceiling is governed by the graphics card.

Settings Recommendations — which preset gives the best experience per the measured rows

The measured FPS rows provide a clear gradient of performance across four presets—Low, Medium, High, and Ultra—at each resolution. For a smooth 60 FPS target, the data shows that 1080p is the most accommodating environment. At 1920x1080, the Low preset delivers 140 FPS, Medium achieves 114.7 FPS, High reaches 84.7 FPS, and Ultra drops to 68.5 FPS. All presets at 1080p stay above the 60 FPS threshold, making this resolution the only one where every setting is playable by that standard.

Moving to 2560x1440, the options narrow. Low settings yield 90.8 FPS, which is comfortable, and Medium provides 74.3 FPS, still above 60. High settings produce 57.2 FPS, which hovers below the 60 FPS mark, while Ultra falls to 45.6 FPS. For a balance of visual fidelity and fluidity, Medium at 1440p appears to be the optimal choice, as it maintains a playable frame rate while offering better visuals than Low. At 3840x2160, the situation becomes more constrained. Low settings deliver 48.6 FPS, Medium drops to 41.9 FPS, High yields 29.9 FPS, and Ultra sinks to 23.5 FPS. None of these reach 60 FPS, so 4K is only viable if the user accepts lower frame rates or reduces the resolution.

The data suggests that the High preset at 1080p (84.7 FPS) offers the best combination of visual quality and performance headroom, as it remains well above 60 FPS while providing a richer graphical experience than Medium. For users prioritizing frame rate above all else, Low at 1080p is the top performer, but it sacrifices visual detail for a 65% increase in FPS over High.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured FPS across resolutions shows a consistent decline as pixel count increases, which is typical for a system where the GPU is the primary constraint. At High settings, the average FPS falls from 84.7 at 1080p to 57.2 at 1440p, a reduction of approximately 32.5%. Moving from 1440p to 4K, the frame rate drops further to 29.9, a 47.7% decrease from 1440p and a 64.7% decrease from 1080p. This steepening decline indicates that the GPU’s rendering capacity is being exhausted as resolution scales.

A similar pattern emerges across other presets. At Medium settings, the drop from 1080p (114.7 FPS) to 1440p (74.3 FPS) is a 35.2% reduction, and from 1440p to 4K (41.9 FPS) is a 43.6% reduction. The Low preset shows a shallower curve: 140 FPS at 1080p, 90.8 FPS at 1440p (a 35.1% drop), and 48.6 FPS at 4K (a 46.5% drop from 1440p). The Ultra preset exhibits the most severe scaling, with 68.5 FPS at 1080p, 45.6 FPS at 1440p (a 33.4% drop), and 23.5 FPS at 4K (a 48.5% drop from 1440p).

These figures point to a system that is GPU-bound in Palworld. The consistent percentage drops across all settings suggest that the CPU is not the limiting factor, as a CPU bottleneck would show smaller FPS differences between resolutions. The RTX 2060’s 6 GB of VRAM and 192-bit memory bus are likely insufficient for the higher memory pressures of 4K, leading to the dramatic frame rate collapse at 3840x2160.

How This Combo Ranks — use comboRankInGame vs other tested combos

In the context of all tested combinations in Palworld, this pairing of the AMD Ryzen 5 5600X and NVIDIA GeForce RTX 2060 ranks 1397 out of 1718 combos. This places it in the lower third of tested configurations, indicating that while the system is functional, it is not a top-tier performer for this game. The rank of 1397 suggests that a significant number of other CPU-GPU pairings deliver higher average frame rates, which is consistent with the RTX 2060 being an older, entry-level 20-series card.

The data does not provide direct comparisons to other combos’ FPS, but the rank itself serves as a relative measure. With 321 combos ranked below it, the system outperforms roughly 18.7% of tested configurations. This positions the combo as a baseline for 1080p gaming, where it can handle most presets, but it falls behind in higher-resolution scenarios. The rank also reflects that the CPU’s 78th percentile standing is dragged down by the GPU’s 58th percentile placement, meaning the overall combo performance is closer to the GPU’s tier than the CPU’s.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 2060 is built on the Turing architecture with a TU106 chip, fabricated on a 12 nm process. It features 1920 shading units, 120 texture mapping units, and 48 raster output units, along with 30 RT cores and 240 tensor cores. The GPU operates at a base clock of 1365 MHz and a boost clock of 1680 MHz, with memory running at 1750 MHz (14 Gbps effective). It has 6 GB of GDDR6 memory on a 192-bit bus, providing 336.0 GB/s of bandwidth.

In synthetic benchmarks, the RTX 2060 scores 14,111 in Passmark G3D and 5,488 in Passmark GPU Compute, placing it in the 58th percentile of all GPUs with an average benchmark score of 16,074. Its nearest rivals show a tight competition: it outperforms the AMD Radeon RX 7600S by 0.5% and the AMD Radeon Pro W5500 by 1.8%, but trails the AMD Radeon Pro 5600M and AMD Radeon Pro 5700 by 1.7% each. This indicates that the GPU’s raw performance is competitive with other mid-range cards of its era, but it lacks the headroom for demanding titles at high resolutions.

For Palworld, the GPU’s role is dominant. The 6 GB VRAM capacity is a likely constraint at 4K, where textures and geometry can exceed this limit, causing the frame rate to plummet to 29.9 FPS at High and 23.5 FPS at Ultra. The boost clock of 1680 MHz and the 336.0 GB/s memory bandwidth are sufficient for 1080p, where the card delivers 84.7 FPS at High, but the scaling to 1440p and 4K shows clear diminishing returns. The GPU’s 58th percentile ranking relative to all GPUs aligns with its mid-pack performance, making it the primary reason the combo ranks 1397 out of 1718, as the CPU has more headroom than the card can utilize in this title.

FAQ

Q: What is the best resolution for this combo to maintain 60 FPS?

A: The data shows that 1920x1080 is the only resolution where all presets exceed 60 FPS, with Low at 140 FPS, Medium at 114.7 FPS, High at 84.7 FPS, and Ultra at 68.5 FPS. At 2560x1440, only Low (90.8 FPS) and Medium (74.3 FPS) stay above 60 FPS.

Q: How does the RTX 2060 compare to its nearest rival, the AMD Radeon RX 7600S?

A: The RTX 2060 has an average benchmark score of 16,074, which is 0.5% higher than the AMD Radeon RX 7600S’s score of 15,996. This puts the NVIDIA card slightly ahead in synthetic performance.

Q: Does the CPU bottleneck the GPU in Palworld?

A: No. The FPS scaling from 1080p to 4K shows consistent drops across all settings (e.g., High falls from 84.7 to 57.2 to 29.9 FPS), indicating the GPU is the limiting component. The Ryzen 5 5600X’s performance, with a Cinebench R23 multi-core score of 18,578, is sufficient to avoid a CPU bottleneck.

Q: What is the combo’s rank among all tested CPU-GPU combinations in Palworld?

A: This combo ranks 1397 out of 1718 tested combinations. This places it in the lower third, meaning most other combos deliver higher average frame rates in this game.

Q: Is the Ultra preset playable at 1440p?

A: The measured average FPS for Ultra at 2560x1440 is 45.6 FPS, which is below the 60 FPS threshold. While it is technically playable, it does not meet the standard for smooth performance, so Medium (74.3 FPS) is recommended at this resolution.

Q: How much VRAM does the RTX 2060 have, and does it affect 4K performance?

A: The RTX 2060 has 6 GB of GDDR6 memory. At 4K, the highest measured FPS is 48.6 on Low settings, while High and Ultra drop to 29.9 and 23.5 FPS, respectively. The 6 GB capacity is a likely contributor to these low frame rates, as it may not be sufficient for the memory demands of 4K textures.