Palworld

Palworld pairs the AMD Ryzen 5 5600GT with the NVIDIA GeForce RTX 4090, creating a combination where the GPU’s immense rendering power is frequently held back by the CPU’s mid-range capabilities. The benchmark data shows a clear hierarchy: at 1080p, the system is heavily CPU-bound, while at 4K, the GPU becomes the primary limiting factor. This analysis walks through the measured FPS across resolutions and settings, contextualizing the combo’s rank and the GPU’s role in shaping the playable experience.

How This Combo Ranks

Within the database of tested combinations for Palworld, this specific pairing of the Ryzen 5 5600GT and the RTX 4090 ranks 60th out of 1718 combos. This places it in the top 4% of all tested configurations, which is a strong overall showing. However, the ranking is more proof of the GPU’s raw power than the CPU’s contribution. The Ryzen 5 5600GT is a 6-core, 12-thread processor with a base clock of 3.60 GHz and a boost clock of 4.60 GHz, built on the Zen 3 architecture. Its average benchmark score is 20740, placing it in the 78th percentile of all CPUs. Its nearest rivals include the Intel Core i7-10700 with a score of 20746 (a 0% delta), the AMD Ryzen 5 5600X at 20680 (a 0.3% delta), and the Intel Core i5-12490F at 20794 (a -0.3% delta). This means the CPU is essentially on par with those processors in synthetic tests.

The bottleneck is evident when comparing the CPU to its GPU partner. The RTX 4090 sits in the 91st percentile of all GPUs with an average benchmark score of 66473, while its nearest rival, the NVIDIA Tesla T4, scores 66733. The performance delta between the CPU and GPU is massive, suggesting that in many scenarios, the CPU cannot feed the GPU fast enough. The combo’s rank of 60th, while impressive, is likely lower than what an RTX 4090 would achieve with a top-tier CPU. The data indicates that this is a system where the GPU dictates the ceiling, but the CPU sets the floor for minimum performance in CPU-intensive scenes.

GPU Role

The NVIDIA GeForce RTX 4090 is the dominant component in this configuration. It features 24 GB of GDDR6X memory on a 384-bit bus, yielding a bandwidth of 1.01 TB/s. The GPU’s boost clock is 2520 MHz, with a base clock of 2235 MHz. Its massive 16384 shading units and 128 RT cores provide the computational horsepower needed for high-fidelity rendering. In Palworld, this translates to the ability to push very high frame rates, particularly at lower resolutions. The GPU’s memory capacity is more than sufficient for the game’s textures and world data, even at 4K.

The data shows that the RTX 4090’s role shifts depending on the resolution. At 1080p, it is largely underutilized due to the CPU bottleneck, as evidenced by the relatively small performance gap between Low and Medium settings. At 4K, the GPU’s workload increases significantly, and the FPS drops, indicating that the rendering pipeline is finally saturated. The GPU’s specifications, including its 82.58 TFLOPS FP32 performance, suggest it can handle any setting Palworld offers, but the measured results show that the CPU prevents it from reaching its full potential at lower resolutions. The GPU is the clear performance driver at 4K, where the frame rate is dictated by its ability to process pixels, not by the CPU’s instruction throughput.

Settings Recommendations

The measured FPS data reveals a clear trade-off between visual fidelity and frame rate. For the best balance of smoothness and visual quality, the High preset is the most sensible choice across all resolutions. At 1080p, High delivers 220.4 FPS, which is excellent for fast-paced gameplay. At 1440p, it drops to 143.6 FPS, still well above the 60 FPS threshold for most displays. Even at 4K, High maintains an average of 81 FPS, which is playable and visually impressive.

Choosing Ultra does provide a visual upgrade, but the cost is steep. At 4K, Ultra drops to 62.7 FPS, a 23% reduction from High. At 1440p, Ultra yields 108.7 FPS, and at 1080p, it produces 165.7 FPS. While these are still respectable numbers, the jump from High to Ultra may not be worth the performance hit, especially since High offers a smoother experience. Conversely, Low and Medium settings are only recommended if the user prioritizes maximum frame rates above all else, as they offer diminishing returns in visual quality. Given the data, High is the recommended preset for a balanced experience, as it provides the highest frame rates while retaining substantial visual detail.

Measured FPS Breakdown

The measured FPS data provides a detailed look at how the combo performs across three resolutions and four quality presets. Starting at 1920x1080, the system delivers 316.5 FPS on Low, 288.6 FPS on Medium, 220.4 FPS on High, and 165.7 FPS on Ultra. The gap between Low and Medium is only 27.9 FPS, while the gap between Medium and High is 68.2 FPS. The largest single drop is from High to Ultra, at 54.7 FPS. This suggests that the CPU is the limiting factor at this resolution, as the RTX 4090 is capable of far higher frame rates, but the Ryzen 5 5600GT cannot keep up.

Moving to 2560x1440, the FPS figures are 231.9 on Low, 188 on Medium, 143.6 on High, and 108.7 on Ultra. The drop from 1080p to 1440p is significant: 84.6 FPS on Low, 100.6 FPS on Medium, 76.8 FPS on High, and 57 FPS on Ultra. This indicates that the GPU is starting to take on more work, but the CPU is still a factor. The relative performance between presets remains similar, with High being 35.1% faster than Ultra.

At 3840x2160, the system produces 129.2 FPS on Low, 107 FPS on Medium, 81 FPS on High, and 62.7 FPS on Ultra. The drop from 1440p to 4K is 102.7 FPS on Low, 81 FPS on Medium, 62.6 FPS on High, and 46 FPS on Ultra. This is where the GPU becomes the dominant bottleneck, as the 4K resolution requires a massive amount of pixel processing. The data shows that even at 4K Low, the system cannot exceed 130 FPS, which is a clear sign that the GPU is now the limiting component.

Resolution Scaling

The performance scaling from 1080p to 4K provides insight into the system’s bottleneck. At Low settings, the FPS drops from 316.5 at 1080p to 231.9 at 1440p (a 26.7% decrease) and then to 129.2 at 4K (a 44.3% decrease from 1440p). This steep decline at 4K indicates that the GPU is struggling to keep up with the pixel count, despite its immense power. At High settings, the drop is from 220.4 at 1080p to 143.6 at 1440p (a 34.9% decrease) and then to 81 at 4K (a 43.6% decrease from 1440p). This pattern is consistent across all presets.

The data suggests that at 1080p, the CPU is the primary bottleneck, as the FPS ceiling is around 316.5, regardless of the GPU’s theoretical capability. The RTX 4090 could likely push over 400 FPS on Low at 1080p, but the Ryzen 5 5600GT’s single-thread performance limits it. As resolution increases, the GPU’s workload grows, and the bottleneck shifts. At 4K, the system is entirely GPU-bound, with the CPU having little impact on the final frame rate. The scaling pattern is typical of a high-end GPU paired with a mid-range CPU: the CPU holds back performance at low resolutions, while the GPU’s limits become apparent at high resolutions.

FAQ

Q: What is the combo’s overall rank for Palworld?

A: The combo ranks 60th out of 1718 tested combinations, placing it in the top 4% of all systems tested for this game.

Q: How does the Ryzen 5 5600GT compare to its nearest CPU rivals?

A: The Ryzen 5 5600GT has an average benchmark score of 20740, which is statistically identical to the Intel Core i7-10700 (20746, 0% delta) and the AMD Ryzen 5 5600X (20680, 0.3% delta). It is slightly behind the Intel Core i5-12490F (20794, -0.3% delta).

Q: What is the best settings preset for a high-refresh-rate 1440p monitor?

A: For 1440p, the High preset delivers 143.6 FPS, which is ideal for a 144Hz monitor. Ultra reduces the frame rate to 108.7 FPS, while Medium offers 188 FPS for competitive play.

Q: Why is the frame rate at 1080p on Low (316.5 FPS) not much higher than on Medium (288.6 FPS)?

A: This small gap indicates a CPU bottleneck. The Ryzen 5 5600GT cannot feed the RTX 4090 fast enough at 1080p, limiting the maximum frame rate regardless of the GPU’s capabilities.

Q: How much performance is lost when moving from 1080p to 4K on High settings?

A: The average frame rate drops from 220.4 FPS at 1080p to 143.6 at 1440p and then to 81 at 4K. This represents a 63% reduction from 1080p to 4K, highlighting the massive GPU workload at higher resolutions.

Q: Is the RTX 4090’s 24 GB of VRAM a limiting factor in Palworld?

A: No, the 24 GB of GDDR6X memory with a 1.01 TB/s bandwidth is more than sufficient for Palworld’s textures and world geometry, even at 4K. The limiting factor is the GPU’s core processing speed, not its memory capacity.