Palworld

Palworld on the AMD Ryzen 5 5600 + AMD Radeon RX 570 combo delivers a playable but constrained experience, primarily dictated by the graphics card. The data shows that this pairing lands near the bottom of the tested combinations, ranking 3543 out of 3711 combos, which places it in the 95th percentile of tested configurations. This is a legacy 1080p-oriented setup; the benchmark results indicate that at higher resolutions, the frame rates fall below acceptable thresholds for smooth gameplay. The following analysis breaks down the CPU and GPU roles, settings recommendations, and a resolution-by-resolution performance breakdown based on the measured data.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 5 5600 is a 6-core, 12-thread processor based on the Zen 3 architecture, codenamed Vermeer, built on a 7 nm process. It has a base clock of 3.50 GHz and a boost clock of 4.40 GHz, with a 65W TDP. Its cache configuration includes 64 KB of L1 per core, 512 KB of L2 per core, and 32 MB of shared L3 cache. The CPU supports DDR4 memory with a dual-channel bus and a memory bandwidth of 51.2 GB/s, and it connects via PCIe Gen 4 with 20 lanes. In synthetic benchmarks, the 5600 scores 18309 in Cinebench R23 multi-core and 2584 in single-core, with an average benchmark score of 20468, placing it in the 74th percentile of all CPUs.

In Palworld, this CPU is not the primary bottleneck at the resolutions tested. The processor’s 6 cores and 12 threads are sufficient to feed the RX 570, but the overall system performance is heavily gated by the GPU. The CPU’s nearest rivals in average benchmark score include the Intel Core Ultra 7 258V (20454, 0.1% higher), the AMD Ryzen 5 8500G (20425, 0.2% higher), the AMD EPYC 9454P (20422, 0.2% higher), and the AMD EPYC 7713 (20363, 0.5% lower). This indicates that the 5600 sits in a tightly packed performance tier, meaning its computational headroom is not the limiting factor here. The measured FPS data shows that the frame rate drops are consistent with GPU-bound scenarios, especially at 4K where the average FPS falls to 17 at High settings, regardless of the CPU’s capability. The CPU’s multi-threaded performance, as seen in the 3DMark 16-thread score of 5641, is ample for Palworld’s survival mechanics, which typically rely on a few primary threads rather than massive parallelism.

Settings Recommendations — which preset gives the best experience per the measured rows

Given the measured FPS data, the most balanced experience for this combo is at 1920x1080 with Medium settings, which yields an average of 59 FPS with a minimum of 50 FPS and a maximum of 68 FPS. This is the only preset that achieves near-60 FPS averages without dropping below playable thresholds. At 1920x1080 Low, the average rises to 73 FPS, which is smoother, but the visual quality trade-off is significant. High settings at 1080p drop to 46 FPS average, which is still playable but less fluid, while Ultra falls to 35 FPS, which starts to feel stuttery in fast-paced combat or exploration.

At 2560x1440, the situation worsens. Medium settings give 39 FPS average (min 33, max 45), which is borderline playable but not recommended for a consistent experience. Low settings at 1440p provide 48 FPS average, which is the only viable option for this resolution if you must push beyond 1080p. High at 1440p drops to 30 FPS, and Ultra to 23 FPS, both below the threshold for smooth gameplay. At 3840x2160, all presets are effectively unplayable, with Low yielding 27 FPS average, Medium 22 FPS (min 18, max 25), High 17 FPS, and Ultra 13 FPS. For the best experience, the data strongly points to 1920x1080 Medium as the sweet spot, balancing frame rate and visual fidelity. If you prioritize smoothness over visuals, 1920x1080 Low provides a 14 FPS average boost over Medium, but the Medium preset offers a better compromise for most players.

FAQ — 4-6 Q&A pairs answerable from FACT PACK data

Q: What is the best resolution and settings combo for this CPU-GPU pairing in Palworld?

A: The measured data shows that 1920x1080 with Medium settings is the optimal choice, delivering an average of 59 FPS with a minimum of 50 FPS and a maximum of 68 FPS. This is the only configuration that consistently stays near the 60 FPS target without significant drops.

Q: How does the Ryzen 5 5600 compare to its closest rivals in terms of benchmark scores?

A: The Ryzen 5 5600 has an average benchmark score of 20468, placing it in the 74th percentile of all CPUs. Its nearest rivals are the Intel Core Ultra 7 258V (20454, 0.1% higher), the AMD Ryzen 5 8500G (20425, 0.2% higher), the AMD EPYC 9454P (20422, 0.2% higher), and the AMD EPYC 7713 (20363, 0.5% lower). These differences are negligible, meaning the 5600 is well-matched against its peers.

Q: Is the RX 570 capable of running Palworld at 1440p?

A: At 2560x1440, the RX 570 can run Palworld, but only at Low settings, which yield an average of 48 FPS. Medium settings drop to 39 FPS average (min 33, max 45), which is playable but not ideal. High and Ultra settings at 1440p produce 30 FPS and 23 FPS averages, respectively, which are below comfortable playability.

Q: What is the GPU’s performance percentile and how does it compare to its nearest rivals?

A: The AMD Radeon RX 570 has an average benchmark score of 28766, placing it in the 74th percentile of all GPUs. Its nearest rivals include the AMD Radeon RX 6800M (28874, 0.4% higher), the AMD Radeon RX 470 (28996, 0.8% higher), the AMD Radeon R9 M295X (28580, 0.7% lower), and the NVIDIA Quadro RTX 8000 (28421, 1.2% lower). This shows the RX 570 sits slightly below its closest competitors.

Q: How does the combo rank among all tested configurations for Palworld?

A: This combo ranks 3543 out of 3711 tested combinations, placing it in the bottom 5% of all configurations. This indicates that while the system is functional, it is far from optimal for Palworld, and users should expect significant performance limitations, particularly at higher resolutions.

Q: What are the CPU’s single-thread and multi-thread scores in Cinebench?

A: The Ryzen 5 5600 scores 2584 in Cinebench R23 single-core and 18309 in multi-core. For comparison, its 3DMark single-thread score is 882, and its max-thread score is 5659. These numbers indicate solid single-thread performance for gaming, though the GPU remains the limiting factor in Palworld.

How This Combo Ranks — use comboRankInGame vs other tested combos

The AMD Ryzen 5 5600 + AMD Radeon RX 570 combination ranks 3543 out of 3711 tested combos in Palworld, placing it in the bottom 5% of all configurations. This ranking reflects the GPU’s age and limited VRAM (4 GB), which severely hampers performance at higher resolutions and settings. The CPU, while competent, cannot compensate for the GPU’s constraints. In practical terms, this combo is only suitable for 1080p gaming with modest settings, as the measured FPS data confirms. The rank is not surprising given that the RX 570 is an end-of-life product with a 150W TDP and a 224.0 GB/s memory bandwidth, which is insufficient for modern titles at high detail levels. Compared to other combos, this system is positioned for budget-conscious builders or those with older hardware, but it will struggle to maintain playable frame rates in Palworld beyond 1080p Medium. The data suggests that users should not expect to run this game at 1440p or 4K with playable performance, as the average FPS at those resolutions falls below 30 FPS on most presets.

GPU Role — VRAM, clocks, and how they relate to this game's results

The AMD Radeon RX 570 is a 4 GB GDDR5 graphics card based on the Polaris 20 chip, using the GCN 4.0 architecture. It has a base clock of 1168 MHz and a boost clock of 1244 MHz, with memory running at 1750 MHz (7 Gbps effective). The GPU features 2048 shading units, 128 TMUs, and 32 ROPs, with a memory bus width of 256 bits and a bandwidth of 224.0 GB/s. Its compute performance is rated at 5.095 TFLOPS for FP32, with a pixel rate of 39.81 GPixel/s and a texture rate of 159.2 GTexel/s. The card supports DirectX 12 (12_0), OpenGL 4.6, and Vulkan 1.3, and has a 150W TDP with a suggested PSU of 450W.

In Palworld, the GPU is the primary bottleneck, as evidenced by the steep FPS drops when moving from 1080p to 1440p and 4K. The 4 GB VRAM is a significant limitation, especially at High and Ultra settings, where texture data likely exceeds the available memory, causing frame rate collapses. At 1920x1080, the RX 570 manages 73 FPS at Low, 59 FPS at Medium, 46 FPS at High, and 35 FPS at Ultra. The gap between Low and Medium (14 FPS) and Medium to High (13 FPS) shows that memory bandwidth and texture throughput are stretched as settings increase. At 2560x1440, the average FPS drops to 48 at Low, 39 at Medium, 30 at High, and 23 at Ultra, while at 3840x2160, it falls to 27 at Low, 22 at Medium, 17 at High, and 13 at Ultra. These numbers clearly demonstrate that the RX 570 cannot handle resolutions above 1080p for Palworld, and even at 1080p, only Low and Medium presets provide acceptable frame rates. The GPU’s 74th percentile ranking and its proximity to rivals like the RX 470 (0.8% higher in average benchmark score) indicate that it is an older, entry-level card that has been surpassed by newer hardware.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The measured FPS data provides a detailed picture of performance across three resolutions and four settings presets. At 1920x1080, the results are as follows: Low yields an average of 73 FPS, Medium yields 59 FPS (with a minimum of 50 FPS and a maximum of 68 FPS), High yields 46 FPS, and Ultra yields 35 FPS. This is the only resolution where the combo approaches playable frame rates on multiple presets, with Medium being the recommended setting for a balance of visuals and smoothness.

At 2560x1440, performance drops significantly. Low settings provide an average of 48 FPS, Medium settings provide 39 FPS (with a minimum of 33 FPS and a maximum of 45 FPS), High settings provide 30 FPS, and Ultra settings provide 23 FPS. The data shows that only Low settings remain fluid at this resolution, while Medium is borderline playable. High and Ultra are not recommended, as frame rates fall below 30 FPS, leading to noticeable stuttering.

At 3840x2160, the combo is effectively unplayable for Palworld. Low settings yield an average of 27 FPS, Medium yields 22 FPS (with a minimum of 18 FPS and a maximum of 25 FPS), High yields 17 FPS, and Ultra yields 13 FPS. All presets at 4K fail to reach 30 FPS, indicating that this resolution is beyond the capabilities of the RX 570. The lack of minimum and maximum FPS data for some presets (Low, High, Ultra at 4K) suggests that frame times may be highly variable, further degrading the experience. Overall, the measured FPS breakdown confirms that this combo is strictly a 1080p solution, with Medium settings offering the best playable experience and any attempt to push higher resolutions resulting in subpar performance.