Palworld
This combination provides smooth gameplay with an average of 101 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 38 | 48 | 59 | 76 |
| 1440p QHD | 67 | 86 | 109 | 135 |
| 1080p Full HD | 96 | 128 | 172 | 206 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Palworld with AMD Ryzen 5 5500 + AMD Radeon RX 7700 XT, In-Depth Analysis
The AMD Ryzen 5 5500 and AMD Radeon RX 7700 XT combination delivers a highly capable Palworld experience, with the data showing that the GPU is the primary driver of performance at higher resolutions, while the CPU's six-core, 12-thread configuration provides ample headroom for the game's survival mechanics. The benchmark results indicate a clear hierarchy: at 1080p, the combo achieves excellent frame rates across all settings, but the scaling to 4K reveals a significant performance drop that points directly to the graphics card's workload. The Ryzen 5 5500, with a base clock of 3.60 GHz and a boost clock of 4.20 GHz, sits in the 79th percentile of all CPUs, and its performance is nearly identical to the Intel Core i5-12500, which scores -0.1% differently. This means the processor is not a bottleneck in Palworld, as the game's demands on the CPU are well within the capabilities of this Zen 3 architecture chip, which also features 16 MB of L3 cache and a 65 W TDP.
CPU Role — cores, clocks, and how they relate to this game's results
The AMD Ryzen 5 5500 brings a 6-core, 12-thread configuration based on the Zen 3 architecture, which is more than sufficient for Palworld's survival gameplay. The data shows that the CPU's performance headroom is substantial, as the GPU becomes the limiting factor when resolution increases. At 1080p with Low settings, the combo reaches 206.2 FPS, a figure that is far beyond what the processor would constrain, indicating that the CPU is not holding back the frame rate. The CPU's single-thread performance, as measured by 3dmark_single_thread at 836, and its multi-threaded capability, with a 3dmark_max_threads score of 5411, suggest that it can handle the game's AI and world simulation tasks without issue.
The processor's performance relative to its rivals is remarkably tight. The nearest rival, the Intel Core i5-12500, has an average score of 20897, which is a deltaPct of -0.1% compared to the Ryzen 5 5500's average benchmark score of 20875. This negligible difference means that in Palworld, the choice between these two CPUs would yield nearly identical results. The data also shows that the CPU's 16 MB of L3 cache and dual-channel DDR4 memory support are adequate for the game's data streaming needs. The benchmark results indicate that the CPU's role in Palworld is to provide a stable baseline, allowing the GPU to scale its performance with settings changes. The 3dmark_8_threads score of 4593 and the 3dmark_16_threads score of 5386 demonstrate that the processor's thread scaling is efficient, which helps maintain consistent frame pacing even in demanding survival scenarios with many entities on screen.
FAQ — 4-6 Q&A pairs answerable from FACT PACK data
Q: What is the highest average FPS achieved by this combo in Palworld?
A: The highest average FPS recorded is 206.2, achieved at 1920x1080 resolution with Low settings. This indicates that the combo can easily push beyond high-refresh-rate monitors when settings are lowered at 1080p.
Q: How does the Ryzen 5 5500 compare to its closest CPU rival?
A: The Ryzen 5 5500 has an average benchmark score of 20875, which is only -0.1% different from the Intel Core i5-12500's score of 20897. This shows that the two processors are effectively tied in overall performance, making them interchangeable for Palworld.
Q: What is the largest performance drop when moving from 1440p to 4K on High settings?
A: Moving from 2560x1440 to 3840x2160 on High settings sees the average FPS drop from 85.5 to 48.2, a decrease of 37.3 FPS. This represents a 43.6% reduction, highlighting the GPU's struggle at 4K.
Q: Is the GPU or CPU the limiting factor at 1080p Ultra?
A: The data shows that at 1080p Ultra, the combo achieves 95.9 FPS, which is significantly lower than the 127.6 FPS at High settings. This suggests the GPU is the limiting factor, as the CPU has already shown it can support higher frame rates at lower settings.
Q: What is the combo's rank among all tested combinations in Palworld?
A: The AMD Ryzen 5 5500 + AMD Radeon RX 7700 XT ranks 760th out of 1718 total combos tested in Palworld. This places it in the upper-middle tier of all possible hardware pairings.
Q: How does the RX 7700 XT's performance compare to its nearest GPU rival?
A: The RX 7700 XT has an average benchmark score of 30097, which is exactly 0% different from the NVIDIA GeForce RTX 5060's score of 30109. The AMD Radeon RX 570 is also close, with a deltaPct of -0.2%.
Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component
The resolution scaling data reveals a classic GPU-bound scenario. At 1080p with Low settings, the combo achieves 206.2 FPS, but this drops to 134.5 FPS at 1440p and further to 75.8 FPS at 4K. This progression shows that the CPU is not the bottleneck, as the frame rate scales inversely with pixel count. The GPU's workload increases dramatically with resolution, and the RX 7700 XT's 12 GB of GDDR6 memory and 432.0 GB/s bandwidth are being pushed to their limits at 4K. When examining the High settings preset, the drop from 127.6 FPS at 1080p to 85.5 FPS at 1440p is a 33% reduction, while moving to 4K at 48.2 FPS represents another 43.6% drop from 1440p. This indicates that the GPU's compute resources, with 3456 shading units and 96 ROPs, are insufficient to maintain high frame rates at 4K.
The data strongly suggests that the GPU is the limiting component at all resolutions above 1080p. At 1080p Medium, the combo hits 171.7 FPS, which is well above the 1440p High result of 85.5 FPS, demonstrating that the CPU can feed the GPU enough data to reach high frame rates when the resolution is low. The RX 7700 XT's boost clock of 2544 MHz and game clock of 2171 MHz are high, but the sheer pixel throughput required at 4K overwhelms it. The 4K Ultra result of 37.5 FPS is particularly telling, as it shows the GPU cannot handle the combined load of high resolution and intense settings. This scaling pattern is typical of a system where the graphics card is the primary performance limiter, and the CPU's 6 cores and 12 threads provide a stable foundation that never becomes the weak link.
How This Combo Ranks — use comboRankInGame vs other tested combos
The AMD Ryzen 5 5500 + AMD Radeon RX 7700 XT combination holds the 760th position out of 1718 tested combos in Palworld. This rank places it in the 44th percentile of all tested systems, meaning that approximately 44% of combinations perform better. This is a respectable showing for a mid-range pairing, and the data indicates that the combo's performance is solidly in the upper-middle tier. The rank reflects the balance between the CPU and GPU, where the RX 7700 XT's 73rd percentile ranking among all GPUs and the Ryzen 5 5500's 79th percentile among CPUs combine to create a system that handles Palworld well at 1080p and 1440p.
The combo's rank of 760 suggests that while it is not a top-tier performer, it significantly outperforms the lower half of all tested combinations. The data shows that the combo's performance is limited primarily by the GPU at higher resolutions, which is consistent with the GPU's 73rd percentile ranking. If the combo were paired with a more powerful GPU, the rank would likely improve, as the CPU has been shown to have headroom. The nearest GPU rival, the NVIDIA GeForce RTX 5060, has an identical average score (deltaPct of 0%), which means that swapping the GPU for that model would yield nearly the same in-game results. The rank also indicates that the combo is well-suited for 1080p gaming, where it achieves frame rates above 95 FPS on all settings, and it remains playable at 1440p with frame rates above 66 FPS on all settings.
Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers
The measured FPS data provides a comprehensive view of the combo's performance across three resolutions and four settings presets. At 1920x1080, the results are as follows: Low settings yield 206.2 FPS, Medium settings yield 171.7 FPS, High settings yield 127.6 FPS, and Ultra settings yield 95.9 FPS. This shows a clear decline as settings increase, with the difference between Low and Ultra being 110.3 FPS. At 2560x1440, the performance drops significantly: Low settings produce 134.5 FPS, Medium produces 109.3 FPS, High produces 85.5 FPS, and Ultra produces 66.7 FPS. The gap between Low and Ultra at 1440p is 67.8 FPS, which is a smaller absolute difference than at 1080p but represents a similar percentage scaling.
At 3840x2160, the combo's performance is markedly lower: Low settings yield 75.8 FPS, Medium yields 58.7 FPS, High yields 48.2 FPS, and Ultra yields 37.5 FPS. The results at 4K show that the combo cannot maintain 60 FPS on any setting except Low, where it achieves 75.8 FPS. The data also reveals the scaling efficiency of the GPU: moving from 1080p to 1440p on High settings results in a 42.1 FPS drop, while moving from 1440p to 4K on High settings results in a 37.3 FPS drop. This suggests that the GPU's performance scales roughly linearly with pixel count, which is expected for a rasterization-bound workload like Palworld. The Ultra preset at 4K is the most demanding scenario, with only 37.5 FPS, which is below the playable threshold for most users.
Settings Recommendations — which preset gives the best experience per the measured rows
Based on the measured FPS data, the High settings preset at 1440p offers the best balance of visual quality and performance. At 2560x1440 with High settings, the combo achieves 85.5 FPS, which is above the 60 FPS threshold for smooth gameplay and provides a significant visual upgrade over Medium settings. The Ultra preset at 1440p drops to 66.7 FPS, which is still playable but leaves less headroom for demanding scenes. For users with a 1080p monitor, the Ultra preset at 95.9 FPS is the best choice, as it delivers the highest visual fidelity while maintaining a frame rate that is suitable for high-refresh-rate displays. The 1080p Medium preset at 171.7 FPS is also an excellent option for competitive play, as it offers a substantial frame rate boost with only a minor visual compromise.
For 4K users, the data suggests that the Low preset at 75.8 FPS is the only viable option for smooth gameplay, as the Medium preset drops to 58.7 FPS, which may be acceptable for some but is below the 60 FPS target. The High and Ultra presets at 4K, with 48.2 FPS and 37.5 FPS respectively, are not recommended for an enjoyable experience. The data indicates that the combo is best suited for 1080p and 1440p gaming, where it can provide high frame rates with high-quality settings. The optimal configuration is 1440p High, as it balances the GPU's capabilities with the game's visual demands, resulting in a smooth and visually appealing experience. The 1080p Ultra preset is the best option for those who prioritize image quality over frame rate, as it still maintains nearly 100 FPS.
GPU Role — VRAM, clocks, and how they relate to this game's results
The AMD Radeon RX 7700 XT is the dominant component in this combo, and its specifications directly explain the performance scaling observed in Palworld. The GPU features 12 GB of GDDR6 memory on a 192-bit bus, providing a memory bandwidth of 432.0 GB/s. This is sufficient for Palworld's textures and assets at 1080p and 1440p, but the data suggests that at 4K, the memory bandwidth becomes a limiting factor, as the frame rates drop significantly. The GPU's architecture is RDNA 3.0, built on a 5 nm process, with 3456 shading units and 216 texture mapping units. The boost clock of 2544 MHz and game clock of 2171 MHz are high for this class of GPU, and they contribute to the strong performance at lower resolutions.
The RX 7700 XT's 73rd percentile ranking among all GPUs is reflected in the Palworld results, where it delivers excellent performance at 1080p but struggles at 4K. The GPU's nearest rival, the NVIDIA GeForce RTX 5060, has an identical average benchmark score (deltaPct of 0%), which suggests that these two cards would perform nearly identically in Palworld. The GPU's compute capabilities, measured by its FP32 performance of 35.17 TFLOPS, are more than adequate for the game's rendering requirements, but the pixel throughput at 4K overwhelms the 96 ROPs. The data shows that the GPU's performance is the primary determinant of frame rates at settings above Low, and the drop from 206.2 FPS at 1080p Low to 37.5 FPS at 4K Ultra is a direct result of the GPU's workload increasing with both resolution and settings. The GPU's 12 GB VRAM is not a bottleneck at any resolution tested, as the game does not appear to exceed this capacity based on the consistent performance scaling.
Hardware Specifications
AMD Ryzen 5 5500
AMD Radeon RX 7700 XT
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 5500 + AMD Radeon RX 7700 XT in Palworld
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 75.8 |
| 3840x2160 | Medium | 58.7 |
| 3840x2160 | High | 48.2 |
| 3840x2160 | Ultra | 37.5 |
| 2560x1440 | Low | 134.5 |
| 2560x1440 | Medium | 109.3 |
| 2560x1440 | High | 85.5 |
| 2560x1440 | Ultra | 66.7 |
| 1920x1080 | Low | 206.2 |
| 1920x1080 | Medium | 171.7 |
| 1920x1080 | High | 127.6 |
| 1920x1080 | Ultra | 95.9 |
Palworld with Ryzen 5 5500 + Other GPUs
See how Palworld performs with the same CPU but different graphics cards.
Palworld with RX 7700 XT + Other CPUs
See how Palworld performs with the same GPU but different processors.
Other Games with Ryzen 5 5500 + RX 7700 XT
Explore FPS benchmarks for other games using this same hardware combination.