Overpower

Overpower

AVERAGE FPS
92
good

This combination provides smooth gameplay with an average of 92 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 57 68 73 117
1440p QHD 67 80 86 138
1080p Full HD 75 90 97 155

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 117
3840x2160 Medium 73
3840x2160 High 68
3840x2160 Ultra 57
2560x1440 Low 138
2560x1440 Medium 86
2560x1440 High 80
2560x1440 Ultra 67
1920x1080 Low 155
1920x1080 Medium 97
1920x1080 High 90
1920x1080 Ultra 75

Overpower with Intel Core Ultra 9 290K Plus + AMD Radeon RX 6700 XT, In-Depth Analysis

The Intel Core Ultra 9 290K Plus and AMD Radeon RX 6700 XT combination ranks in the 1528th position out of 2980 tested combos for Overpower. This places the pairing in the lower-middle tier of the database, indicating that while it is far from the top of the charts, it is not a bottom-tier performer either. The rank suggests that the system is capable of delivering playable frame rates, but it will not compete with high-end enthusiast configurations that dominate the upper percentile. The data shows that the combo’s standing is largely determined by the GPU’s performance ceiling, which becomes the limiting factor at higher resolutions and graphical presets.

The CPU’s placement in the 96th percentile among all tested processors, combined with the GPU’s 72nd percentile ranking, creates an inherent imbalance. The processor has significant headroom that the graphics card cannot fully utilize in this title, particularly at 4K resolution where the workload shifts heavily onto the GPU. This results in a combo rank that reflects the weaker component’s influence on overall gaming performance, a typical pattern for systems pairing a top-tier CPU with a mid-range GPU.

How This Combo Ranks

The combo’s rank of 1528 out of 2980 places it just past the halfway point of all tested configurations. This is a notable result because the CPU alone sits in the 96th percentile of all processors, while the GPU sits in the 72nd percentile. The disparity between these two percentiles explains why the combined rank does not approach the top quartile. The benchmark results indicate that in Overpower, the GPU is the primary bottleneck, and the combo rank reflects that constraint rather than the CPU’s capabilities.

When examining the GPU’s nearest rivals, the RX 6700 XT performs nearly identically to the NVIDIA GeForce RTX 4070 Mobile, with a deltaPct of 0.0. It also trails the RTX 3090 by 0.5 percent and the AMD Radeon Pro Vega 20 by 1.5 percent, while leading the RTX PRO 4000 Blackwell by 1.1 percent. These tight margins indicate that the GPU’s performance class is well established, and the combo rank is consistent with what one would expect from a graphics card in this tier.

The CPU’s nearest rivals show a similar clustering. The Ultra 9 290K Plus leads the Intel Core Ultra 9 285K by 0.2 percent and the AMD EPYC 4584PX by 1.1 percent, while trailing the AMD EPYC 7F72 by 1.3 percent. These small deltas confirm that the CPU is performing at the top of its class, but this does little to boost the combo rank because the GPU cannot translate that processing power into higher frame rates at demanding settings.

The measured FPS data reinforces this ranking. At 1920x1080 with Low settings, the combo achieves 155 FPS, which is a strong result for competitive play. However, at 3840x2160 with Ultra settings, the average drops to 57 FPS, which is below the 60 FPS threshold that many players consider the minimum for smooth gameplay. This range of performance across resolutions and settings demonstrates why the combo sits in the middle of the pack — it can handle less demanding scenarios with ease, but it struggles under maximum load.

GPU Role

The AMD Radeon RX 6700 XT is the defining component for this combo’s gaming performance. Its 12 GB of GDDR6 memory on a 192-bit bus provides 384.0 GB/s of bandwidth, which is sufficient for Overpower’s texture-heavy scenes at 1080p and 1440p but becomes strained at 4K. The GPU’s boost clock of 2581 MHz and game clock of 2424 MHz are competitive for its class, with the base clock set at 2321 MHz. These clocks allow the card to deliver strong frame rates at lower resolutions, as evidenced by the 155 FPS average at 1080p Low settings.

The GPU’s memory configuration plays a critical role in the measured results. At 3840x2160 with Medium settings, the average FPS is 73, with a minimum of 62 and a maximum of 84. The minimum FPS figure is particularly telling — it suggests that memory bandwidth limitations can cause frame drops during intense scenes. At 2560x1440 with Medium settings, the average is 86 FPS with a minimum of 73 and a maximum of 99, showing that the memory subsystem has more headroom at this resolution.

The RX 6700 XT’s 40 ray tracing cores and RDNA 2.0 architecture are relevant for Overpower’s graphical features, though the measured data does not isolate ray tracing performance. The card’s 2560 shading units and 160 texture mapping units contribute to its compute capabilities, with a peak FP32 performance of 13.21 TFLOPS. These specifications place the GPU in the 72nd percentile of all tested graphics cards, with an average benchmark score of 27425.

The GPU’s nearest rival comparisons show that it is essentially equivalent to the RTX 4070 Mobile, which is notable because that is a laptop part. The desktop RX 6700 XT also performs within 0.5 percent of the RTX 3090, a much higher-tier card, indicating that Overpower’s optimization favors the AMD architecture. However, the GPU’s performance plateau at 4K Ultra settings (57 FPS) shows that it cannot maintain high frame rates at maximum graphical fidelity, which is a key consideration for users with 4K displays.

FAQ

Q: What is the best resolution for this combo to maintain 60+ FPS on High settings?

A: At 2560x1440 with High settings, the combo achieves an average of 80 FPS, and at 1920x1080 with High settings, it reaches 90 FPS. For 4K, the average drops to 68 FPS on High, which is above 60 but with less headroom for demanding scenes.

Q: How does this combo perform at 4K Ultra settings?

A: The measured data shows an average of 57 FPS at 3840x2160 with Ultra settings. This is below the 60 FPS threshold, suggesting that users should opt for High or Medium settings at 4K for a smoother experience.

Q: Is the CPU holding back the GPU in this game?

A: No. The CPU sits in the 96th percentile of all processors, and its Cinebench R23 multi-core score of 51731 indicates substantial processing power. The GPU is the limiting factor, as shown by the performance drop at higher resolutions.

Q: What is the difference in performance between Low and Ultra settings at 1080p?

A: At 1920x1080, Low settings deliver 155 FPS average, while Ultra settings deliver 75 FPS average. This represents a significant 80 FPS difference, indicating that the GPU’s workload scales substantially with graphical quality.

Q: How does this combo compare to a system with an RTX 3090?

A: The RX 6700 XT trails the RTX 3090 by 0.5 percent in average benchmark score. This means the combo’s performance is nearly identical to what one would expect with an RTX 3090 in Overpower, despite the significant price difference between the two GPUs.

Q: Does the combo support ray tracing in Overpower?

A: The GPU has 40 ray tracing cores and supports DirectX 12 Ultimate (12_2), which includes ray tracing features. However, the measured FPS data does not specify whether ray tracing was enabled, so exact performance with ray tracing cannot be determined from the available data.

Settings Recommendations

The measured FPS data provides a clear picture of which settings offer the best experience for this combo. At 1920x1080, the Low preset delivers 155 FPS average, which is ideal for high-refresh-rate monitors and competitive play. However, the Medium preset still offers 97 FPS with a minimum of 82 FPS, providing a good balance between visual quality and smoothness. The High preset at 90 FPS is also viable, but the Ultra preset at 75 FPS begins to show diminishing returns.

At 2560x1440, the Medium preset stands out as the recommended choice. It delivers 86 FPS average with a minimum of 73 FPS, which keeps the experience above 60 FPS even in demanding scenes. The High preset at 80 FPS is also acceptable, but the Ultra preset at 67 FPS approaches the lower limit of what is considered smooth. For users prioritizing visual fidelity, High is the safest option, while Medium offers more headroom for frame rate consistency.

At 3840x2160, the situation changes dramatically. The Low preset delivers 117 FPS, which is surprisingly playable at 4K, but the visual compromise is significant. The Medium preset at 73 FPS with a minimum of 62 FPS is the best balance for 4K, as it stays above 60 FPS in most scenarios. The High preset at 68 FPS is borderline, and the Ultra preset at 57 FPS is not recommended for smooth gameplay. The data suggests that 4K users should stick to Medium or Low settings to maintain acceptable frame rates.

Overall, the Medium preset provides the best experience across all three resolutions. It offers a consistent FPS advantage over High and Ultra while maintaining superior visual quality compared to Low. For 1080p users, Medium delivers 97 FPS, which is well above the 60 FPS target. For 1440p users, Medium provides 86 FPS, and for 4K users, Medium delivers 73 FPS. This consistency makes Medium the safest recommendation for this combo.

Measured FPS Breakdown

At 1920x1080, the combo delivers its strongest performance. Low settings produce an average of 155 FPS, which is the highest measured result across all configurations. Medium settings yield 97 FPS with a minimum of 82 FPS and a maximum of 111 FPS, showing good frame time consistency. High settings drop to 90 FPS, while Ultra settings fall to 75 FPS. The spread from Low to Ultra is 80 FPS, indicating that the GPU’s performance scales significantly with graphical load at this resolution.

At 2560x1440, the performance decreases across all settings. Low settings deliver 138 FPS, which remains excellent for high-refresh-rate displays. Medium settings produce 86 FPS with a minimum of 73 FPS and a maximum of 99 FPS, maintaining playability throughout. High settings drop to 80 FPS, and Ultra settings fall to 67 FPS. The gap between Low and Ultra is 71 FPS, slightly smaller than at 1080p, suggesting that the GPU is becoming more of a bottleneck at higher resolutions.

At 3840x2160, the performance drops considerably. Low settings still deliver 117 FPS, which is surprisingly high for 4K. Medium settings produce 73 FPS with a minimum of 62 FPS and a maximum of 84 FPS, keeping the average above 60 FPS. High settings drop to 68 FPS, and Ultra settings fall to 57 FPS. The minimum FPS of 62 at Medium settings is the only measured minimum that stays above 60 FPS at 4K, making Medium the only preset that guarantees smooth gameplay at this resolution.

The data reveals a clear pattern: the combo’s performance degrades predictably as resolution increases, with the GPU being the limiting factor. The CPU’s strong multi-core performance does not translate into higher frame rates at 4K, as evidenced by the drop from 155 FPS at 1080p Low to 117 FPS at 4K Low. This is consistent with the GPU’s 72nd percentile ranking, which indicates that it is a mid-range part that cannot sustain high frame rates at maximum resolutions.

CPU Role

The Intel Core Ultra 9 290K Plus is a formidable processor that provides ample computational power for Overpower. With 24 cores and 24 threads, it offers substantial multi-threaded performance, as shown by its Cinebench R23 multi-core score of 51731. The CPU’s boost clock of 5.80 GHz and base clock of 3.70 GHz allow it to handle single-threaded workloads with ease, evidenced by its Cinebench R23 single-core score of 7303. These specifications place the CPU in the 96th percentile of all processors, with an average benchmark score of 84003.

Despite its capabilities, the CPU’s role in Overpower is secondary to the GPU. The measured FPS data shows that the combo’s performance is largely determined by the graphics card, especially at higher resolutions. At 1080p, the CPU can feed the GPU enough data to achieve 155 FPS on Low settings, but at 4K, the GPU becomes the bottleneck, and the CPU’s additional power does not translate into higher frame rates. This is evident from the fact that the CPU’s nearest rivals — the Intel Core Ultra 9 285K and AMD EPYC 4584PX — show only 0.2 and 1.1 percent differences in average score, yet the combo’s rank remains in the middle of the pack.

The CPU’s 36 MB of shared L3 cache and 3 MB of L2 cache per core provide ample memory for game data, reducing the need for frequent memory access. Its dual-channel DDR5 memory support with 115.2 GB/s bandwidth ensures that the CPU can quickly access game assets. However, these advantages are not fully utilized in Overpower, as the game appears to be GPU-bound at most settings. The CPU’s 17,800 million transistors on a 3 nm process node from TSMC indicate a highly efficient design, but this efficiency does not compensate for the GPU’s limitations.

The data suggests that users with this combo should focus on GPU settings rather than CPU performance. The CPU’s 96th percentile ranking means it will not be a bottleneck in most scenarios, and users can safely enable High or Medium settings without worrying about CPU-induced frame drops. The only scenario where the CPU might matter is at 1080p with Low settings, where the 155 FPS average approaches the limits of what the CPU can feed to the GPU. For most users, the GPU will be the primary constraint, and adjusting graphical settings will have a greater impact on performance than any CPU-related tweaks.

Hardware Specifications

Intel Core Ultra 9 290K Plus

Cores / Threads 24 / 24
Base Clock 3700 MHz
Boost Clock 5800 MHz
TDP 125W
Socket Intel Socket 1851
View Full CPU Details →

AMD Radeon RX 6700 XT

VRAM 12 GB GDDR6
Base Clock —
Boost Clock 2581 MHz MHz
TDP 230 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra 9 290K Plus + AMD Radeon RX 6700 XT in Overpower

Resolution Settings Avg FPS
3840x2160 Low 117.0
3840x2160 Medium 73.0
3840x2160 High 68.0
3840x2160 Ultra 57.0
2560x1440 Low 138.0
2560x1440 Medium 86.0
2560x1440 High 80.0
2560x1440 Ultra 67.0
1920x1080 Low 155.0
1920x1080 Medium 97.0
1920x1080 High 90.0
1920x1080 Ultra 75.0

Overpower with iUltra 9 290K Plus + Other GPUs

See how Overpower performs with the same CPU but different graphics cards.

Overpower with RX 6700 XT + Other CPUs

See how Overpower performs with the same GPU but different processors.

Other Games with iUltra 9 290K Plus + RX 6700 XT

Explore FPS benchmarks for other games using this same hardware combination.