Overpower

The Intel Core Ultra 5 225 paired with the NVIDIA GeForce RTX 4070 ranks 642nd out of 2980 tested combos in Overpower, placing it in the top 22% of all configurations. This is a strong result for a mainstream desktop pairing, indicating that the combination is well-balanced for this particular action title. The combo outperforms roughly 78% of all tested systems, and the data suggests that neither component is a glaring bottleneck at most settings, though the balance shifts depending on resolution and quality preset.

How This Combo Ranks

The 642nd rank out of 2980 combos puts this pairing in the upper quintile of tested systems for Overpower. This is not a top-tier enthusiast setup, but it is clearly above the median performer. The ranking reflects a system that can handle the game's demands without major compromises. The position suggests that the CPU and GPU are well-matched for this title, as a significant mismatch would typically push the combo lower in the rankings. The data shows that the Ultra 5 225 holds its own in this pairing, contributing enough to avoid holding back the RTX 4070 in most scenarios. While the rank is respectable, it also indicates that there are many faster combos above it, likely featuring higher-end GPUs with more VRAM and higher memory bandwidth. For a builder targeting high-refresh 1440p or entry-level 4K gaming, this rank is a positive indicator, but it is not a chart-topping result. The percentile placement suggests that users can expect smooth, playable performance without needing to dial settings down aggressively.

GPU Role

The NVIDIA GeForce RTX 4070 is the primary driver of frame rates in this combo, and its specifications directly influence the measured results. The GPU features 12 GB of GDDR6X memory on a 192-bit bus, providing 504.2 GB/s of bandwidth. This memory configuration is adequate for Overpower at 1080p and 1440p, but it becomes a limiting factor at 4K Ultra settings. The card's boost clock of 2475 MHz and base clock of 1920 MHz are derived from the Ada Lovelace architecture, built on a 5 nm process. With 5888 shading units and 64 ROPs, the GPU delivers a pixel rate of 158.4 GPixel/s and a texture rate of 455.4 GTexel/s. These figures translate to raw throughput that is sufficient for the game's action sequences. The 29.15 TFLOPS of FP32 performance is a solid number for a mid-range card, and the data shows it handles Overpower's workload effectively. The GPU's 46 RT cores and 184 tensor cores are present but are not heavily utilized in this title, as the measured FPS values do not show ray tracing-specific benchmarks. The 12 GB VRAM buffer is a key consideration; at 4K Ultra, the game appears to be pushing against this limit, which likely contributes to the lower average FPS of 77. The card's nearest rivals include the NVIDIA Tesla P4 and AMD Radeon RX Vega 56, with deltaPct values of 0.1% and 0.4% respectively, indicating that the RTX 4070 is statistically tied with these older or specialized parts in average benchmark scores. However, in actual Overpower gameplay, the RTX 4070's modern architecture provides features like DirectX 12 Ultimate support that these rivals may lack, though the raw scores are similar.

Resolution Scaling

The measured FPS data reveals a clear pattern of scaling from 1080p to 4K, with the GPU becoming the primary bottleneck at higher resolutions. At 1080p Low, the combo achieves 212 FPS, which drops to 189 FPS at 1440p Low, a reduction of 23 FPS or roughly 11%. At 4K Low, the average drops further to 160 FPS, an additional 29 FPS decrease. This scaling is relatively gentle, suggesting that at Low settings, the CPU is still contributing to frame generation, and the GPU has headroom. However, at Ultra settings, the scaling is more severe. The 1080p Ultra average is 102 FPS, which falls to 91 FPS at 1440p Ultra, a drop of 11 FPS. At 4K Ultra, the average plummets to 77 FPS, a 25 FPS decrease from 1440p and a 25% reduction from 1080p. This steep decline at 4K Ultra indicates that the GPU is becoming saturated, and the 12 GB VRAM capacity is likely a constraint. The data shows that the limiting component shifts from the CPU at 1080p Low to the GPU at 4K Ultra. At 1080p Low, the 212 FPS result is likely CPU-bound, as the RTX 4070 could handle more frames if the processor could supply them. As resolution increases, the GPU's workload grows, and the frame rate becomes more dependent on the graphics card's raw performance. The 4K Medium result of 100 FPS, compared to 4K High at 93 FPS, shows that the game is sensitive to quality settings at this resolution, with a 7 FPS difference between these two presets. This pattern is typical for a well-balanced mid-range combo, where the CPU is sufficient for 1080p and 1440p, but the GPU is the limiting factor at 4K.

Measured FPS Breakdown

At 1920x1080, the combo delivers its highest frame rates. The Low preset achieves an average of 212 FPS, which is excellent for high-refresh monitors. The Medium preset averages 132 FPS, with a minimum of 112 FPS and a maximum of 152 FPS, indicating consistent frame delivery. The High preset averages 123 FPS, while the Ultra preset drops to 102 FPS. The data shows a 110 FPS difference between Low and Ultra at 1080p, highlighting the significant impact of quality settings on performance. For 2560x1440, the results are still strong. The Low preset averages 189 FPS, which is a 23 FPS drop from 1080p Low. The Medium preset averages 118 FPS, with a minimum of 100 FPS and a maximum of 135 FPS. The High preset averages 109 FPS, and the Ultra preset averages 91 FPS. The scaling from 1080p to 1440p is roughly 10-15% across all presets, which is expected for a GPU with this memory bandwidth. At 3840x2160, the performance takes a more pronounced hit. The Low preset averages 160 FPS, which is still playable, but the Medium preset drops to 100 FPS, with a minimum of 85 FPS and a maximum of 115 FPS. The High preset averages 93 FPS, and the Ultra preset averages 77 FPS. The 4K Ultra result of 77 FPS is near the edge of playability for a smooth experience, and the data suggests that users should consider dropping to High or Medium settings for a more stable frame rate. The minimum FPS values are only provided for Medium presets, with 112 FPS at 1080p, 100 FPS at 1440p, and 85 FPS at 4K, all of which are above 60 FPS, indicating that the combo can maintain a playable experience even in demanding scenes.

CPU Role

The Intel Core Ultra 5 225 is a 10-core, 10-thread processor based on the Arrow Lake architecture, built on a 3 nm process. It has a base clock of 3.30 GHz and a boost clock of 4.90 GHz, with a 65 W TDP. The CPU's cache configuration includes 192 KB of L1 per core, 3 MB of L2 per core, and 20 MB of shared L3 cache. This processor does not have hyper-threading, so the 10 cores are also 10 threads, which is a departure from Intel's previous designs that included hyper-threading on some models. In Overpower, the CPU's role is to feed the GPU with draw calls and game logic, and the data shows that it is sufficient for this task at 1080p and 1440p. The Cinebench R23 multicore score of 25891 and single-core score of 3655 indicate strong per-core performance, which is crucial for a game that likely relies on a few main threads. The PassMark single-thread score of 4412 confirms this, as it suggests the CPU can handle high IPC workloads. The CPU's nearest rivals include the AMD Ryzen 5 5600F, which has a deltaPct of 0% (meaning it is statistically identical in average benchmark score), and the AMD Ryzen 5 5500X3D, which is 0.2% slower. This places the Ultra 5 225 in the same performance bracket as these older AMD parts, which is notable for a newer processor. In the game data, the CPU's impact is most visible at 1080p Low, where the 212 FPS result is likely near the CPU's maximum frame output. At higher resolutions, the GPU takes over as the limiting factor, and the CPU's performance becomes less critical. The 10-core, 10-thread configuration is adequate for modern games, and the lack of hyper-threading does not appear to be a hindrance in this title, as the measured FPS values are consistently high. The CPU's 20 MB of L3 cache is a decent amount, and the dual-channel DDR5 memory support with 102.4 GB/s bandwidth provides sufficient memory throughput for the game's data access patterns.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend on the target resolution and refresh rate. For 1080p, the High preset at 123 FPS is the best balance of visual quality and performance, as it provides a smooth experience on a 120 Hz monitor without the steep drop to Ultra's 102 FPS. The Medium preset at 132 FPS is also viable, but High offers better visuals with only a 9 FPS penalty. For 1440p, the High preset at 109 FPS is the recommended choice, as it stays above 100 FPS and provides good visual fidelity. The Ultra preset at 91 FPS is playable but may be noticeable on a 144 Hz display, so High is the safer pick. The Medium preset at 118 FPS is a good alternative for users who prefer higher frame rates over visual detail. At 4K, the Ultra preset at 77 FPS is borderline, and the data suggests that High at 93 FPS is the better option for a consistent experience. The Medium preset at 100 FPS offers the highest frame rate at 4K while still maintaining acceptable visuals, and it also has the only provided minimum FPS data at this resolution (85 FPS), showing that it can hold up in demanding scenes. For a 60 Hz 4K display, Medium is the best choice, as it provides a comfortable margin above 60 FPS. For a 144 Hz 1440p display, High is the recommended preset, as it stays close to the refresh rate limit. In all cases, the Low preset should be avoided unless the user has a very high refresh rate monitor and prioritizes frame rate over all else, as the visual quality trade-off is significant. The data indicates that this combo is best utilized at 1080p or 1440p with High or Medium settings, where it delivers between 109 and 132 FPS, providing a responsive and visually appealing experience. At 4K, users should accept Medium or High settings to maintain playable frame rates, as the Ultra preset's 77 FPS is too close to the edge for consistent smoothness.