Overpower
This combination offers playable performance with an average of 54 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 33 | 40 | 43 | 69 |
| 1440p QHD | 39 | 47 | 51 | 81 |
| 1080p Full HD | 44 | 53 | 57 | 91 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Overpower with Intel Core i7-14700K + NVIDIA GeForce RTX 3050 4 GB, In-Depth Analysis
Resolution Scaling
The measured FPS data for Overpower shows a clear pattern: this combo is heavily GPU-limited across all tested resolutions. At 1080p High settings, the average frame rate sits at 53 FPS. Moving to 1440p High drops that to 47 FPS, a reduction of roughly 11%. Stepping up to 4K High further reduces the average to 40 FPS, which is about 15% lower than the 1440p result and 25% lower than the 1080p result.
This scaling behavior tells a specific story. The frame rate penalty from 1080p to 1440p is modest, but the jump to 4K takes a more noticeable toll. At Low settings, the pattern is similar: 91 FPS at 1080p, 81 FPS at 1440p (an 11% drop), and 69 FPS at 4K (a 15% drop from 1440p). The consistent percentage losses across settings indicate that the NVIDIA GeForce RTX 3050 4 GB is the limiting factor, not the Intel Core i7-14700K. If the CPU were the bottleneck, you would expect the FPS gap between resolutions to shrink dramatically at higher settings, which does not happen here.
The data suggests that the CPU has ample headroom. The i7-14700K with its 20 cores and 28 threads is far more capable than what this game needs at these settings. The GPU's 4 GB VRAM and 128-bit memory bus are the constraints. The 192.0 GB/s memory bandwidth is modest by modern standards, and at 4K the pixel throughput demands exceed what this GPU can deliver. The result is that even at Low settings, 4K only reaches 69 FPS average, which is playable but far from the 144 FPS or higher that competitive action games typically benefit from.
FAQ
Q: Can this combo handle 4K gaming in Overpower?
A: Yes, but only at lower settings. The data shows 4K Low averages 69 FPS, 4K Medium averages 43 FPS, and 4K High averages 40 FPS. Ultra drops to 33 FPS. For a smooth experience, 4K Low is the only viable option, and even that is marginal for fast-paced action.
Q: What is the best resolution for this combination?
A: Based on the measured FPS, 1080p is the sweet spot. At Medium settings it averages 57 FPS, at High it averages 53 FPS, and even Ultra stays above 44 FPS. This provides the most headroom for consistent frame pacing in an action game.
Q: How does the RTX 3050 4 GB's VRAM affect 4K performance?
A: The 4 GB GDDR6 memory with a 128-bit bus is a limiting factor. At 4K Ultra, the average FPS drops to 33, which suggests the frame buffer is struggling with the texture and geometry loads. The 192.0 GB/s bandwidth is insufficient for high-resolution, high-detail rendering in this title.
Q: Is the i7-14700K bottlenecking the RTX 3050?
A: No. The benchmark data indicates the GPU is the limiting component. The i7-14700K has a Cinebench R23 multi-core score of 33440.5 and a single-core score of 2160, which places it in the 94th percentile of all CPUs. The GPU's performance percentile is 50th, meaning the CPU is far ahead of the GPU in relative capability.
Q: What is the expected frame time consistency?
A: The only resolution with min/max FPS data is Medium settings. At 1080p Medium, the range is 49 to 66 FPS. At 1440p Medium, it is 43 to 59 FPS. At 4K Medium, it is 37 to 50 FPS. The spread is roughly 17 FPS at each resolution, indicating moderate frame time variance.
Q: Should I play at Ultra settings?
A: Only if you can tolerate lower frame rates. Ultra averages 44 FPS at 1080p, 39 FPS at 1440p, and 33 FPS at 4K. For an action game, these numbers are below the 60 FPS threshold most players prefer, so Medium or High settings are recommended.
GPU Role
The NVIDIA GeForce RTX 3050 4 GB is the dominant variable in these results. Its specifications paint a clear picture of a budget-oriented Ampere chip. The GA107 die has 2048 shading units, 64 TMUs, and 32 ROPs, with 16 RT cores and 64 tensor cores. The base clock is 1545 MHz with a boost clock of 1740 MHz. The memory configuration is the notable weakness: 4 GB of GDDR6 on a 128-bit bus, yielding 192.0 GB/s of bandwidth.
In Overpower, the VRAM capacity is the first constraint. At 4K Ultra, the average FPS of 33 suggests the game is swapping or compressing textures to fit within the 4 GB frame buffer. The difference between 4K Low (69 FPS) and 4K Ultra (33 FPS) is a 52% drop, which is steep. Even at 1080p, Ultra (44 FPS) is only 52% of the Low setting's 91 FPS. This scaling is typical of a GPU that runs out of memory bandwidth or capacity as texture detail increases.
The GPU's FP32 throughput of 7.127 TFLOPS is adequate for 1080p gaming, but the pixel rate of 55.68 GPixel/s and texture rate of 111.4 GTexel/s are mediocre. At 4K, the GPU must fill four times the pixels of 1080p, and the math shows it cannot keep up. The 90 W TDP and 250 W suggested PSU indicate this is a power-efficient card, but efficiency does not translate to high-end performance. The dual-slot cooler and single 6-pin connector further confirm its entry-level positioning.
The measured FPS data aligns with the GPU's percentile ranking of 50th among all GPUs. This is a mid-pack card, and the benchmark results reflect that. The 4 GB VRAM is particularly problematic for a 2023 action game like Overpower, which likely targets larger texture sets. Players should expect to dial back texture quality and shadow settings to maintain playable frame rates.
Measured FPS Breakdown
At 1920x1080, the combo delivers its best results. Low settings produce an average of 91 FPS. Medium settings average 57 FPS, with a measured range of 49 to 66 FPS. High settings average 53 FPS. Ultra settings drop to 44 FPS. The gap between Low and Medium is significant (37%), while the gap between Medium and Ultra is smaller (23%), suggesting diminishing returns from Medium to Ultra.
At 2560x1440, the numbers scale down predictably. Low averages 81 FPS. Medium averages 51 FPS, ranging from 43 to 59 FPS. High averages 47 FPS. Ultra averages 39 FPS. The drop from 1080p to 1440p at each setting is roughly 11-13%, which is consistent with the increased pixel count.
At 3840x2160, the GPU struggles. Low averages 69 FPS. Medium averages 43 FPS, with a range of 37 to 50 FPS. High averages 40 FPS. Ultra averages 33 FPS. The 4K Low result is the only one that approaches playable, but the 69 FPS average is still below what many action game players would consider smooth.
The data shows a clear pattern: each settings tier costs roughly 10-15 FPS at a given resolution. The exception is the Low to Medium jump at 1080p, which costs 37% of the frame rate. This suggests that Medium settings enable features that heavily tax the GPU, likely related to texture streaming or shadow quality. The min FPS values at Medium settings are worth noting: 49 at 1080p, 43 at 1440p, and 37 at 4K. These minimums are close to the averages, indicating relatively stable frame pacing rather than sudden spikes.
How This Combo Ranks
The combination of the Intel Core i7-14700K and the NVIDIA GeForce RTX 3050 4 GB ranks 3268 out of 3713 tested combos in Overpower. This places it in the bottom 12% of all combinations tested. This low ranking is almost entirely due to the GPU. The i7-14700K is a high-end processor, but pairing it with a mid-range GPU creates a significant imbalance in this game.
The CPU's benchmark scores support this interpretation. The i7-14700K achieves 33440.5 in Cinebench R23 multi-core, which puts it in the 94th percentile of all CPUs. Its nearest rivals in overall benchmark score are the AMD EPYC 9115 (0.1% ahead), AMD Ryzen 9 7950X (0.2% behind), AMD Ryzen 9 7940HX (0.7% behind), and AMD Ryzen 7 9700F (0.9% behind). These are all high-end or server-class parts, confirming the CPU's strength.
The GPU, by contrast, has no nearest rivals listed and sits at the 50th percentile of all GPUs. In a game like Overpower, which appears to be GPU-bound based on the resolution scaling, the combo's rank is limited by the weakest link. A more balanced pairing would see a mid-range CPU with this GPU, or a higher-end GPU with this CPU. The current configuration leaves performance on the table, as the CPU is capable of driving far higher frame rates if paired with a more powerful graphics card.
CPU Role
The Intel Core i7-14700K is a Raptor Lake Refresh part on the Intel Socket 1700 platform. It has 20 cores and 28 threads, with a base clock of 3.40 GHz and a boost clock of 5.60 GHz. The L3 cache is 33 MB shared, and each core has 2 MB of L2 and 80 KB of L1. The CPU supports DDR4 and DDR5 memory in a dual-channel configuration, and it includes UHD Graphics 770 as integrated graphics. The TDP is 125 W, and it was released in October 2023 with a launch MSRP of $409.
In Overpower, the CPU's role is secondary. The measured FPS data shows consistent scaling with resolution, which is the hallmark of a GPU bottleneck. If the CPU were limiting performance, you would see similar frame rates across resolutions, particularly at lower settings. Instead, 1080p Low produces 91 FPS while 4K Low produces 69 FPS, a 24% difference that can only be attributed to GPU load.
The i7-14700K's synthetic benchmarks indicate it has far more headroom than the GPU can utilize. Its Cinebench R15 multi-core score is 5035, and single-core is 313.5. The R20 scores are 18544 multi-core and 2617 single-core. Geekbench scores are 20767 multi-core and 2569 single-core. Passmark results show a multi-thread score of 52392 and a single-thread score of 4472. These numbers are all in the top tier of desktop processors.
For Overpower, this means the CPU is not a concern. Players with this combo should focus on GPU settings. Lowering resolution or graphics quality will yield immediate FPS gains, while CPU overclocking or upgrade would provide no measurable benefit in this specific game. The 5.60 GHz boost clock and 20 cores are more than sufficient for the game's logic, physics, and AI workloads. The bottleneck is unequivocally the GPU's 4 GB VRAM and 128-bit memory interface.
Hardware Specifications
Intel Core i7-14700K
NVIDIA GeForce RTX 3050 4 GB
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i7-14700K + NVIDIA GeForce RTX 3050 4 GB in Overpower
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 69.0 |
| 3840x2160 | Medium | 43.0 |
| 3840x2160 | High | 40.0 |
| 3840x2160 | Ultra | 33.0 |
| 2560x1440 | Low | 81.0 |
| 2560x1440 | Medium | 51.0 |
| 2560x1440 | High | 47.0 |
| 2560x1440 | Ultra | 39.0 |
| 1920x1080 | Low | 91.0 |
| 1920x1080 | Medium | 57.0 |
| 1920x1080 | High | 53.0 |
| 1920x1080 | Ultra | 44.0 |
Overpower with RTX 3050 4 GB + Other CPUs
See how Overpower performs with the same GPU but different processors.
Other Games with ii7-14700K + RTX 3050 4 GB
Explore FPS benchmarks for other games using this same hardware combination.