Overpower

The Intel Core i5-11400F paired with the NVIDIA GeForce RTX 3070 Ti delivers a solid 1080p and 1440p experience in Overpower, though 4K Ultra pushes the GPU to its limits. The data shows a clear pattern: performance scales predictably with resolution, and the CPU holds its own even at lower resolutions where it could become a bottleneck.

Resolution Scaling

The measured FPS data reveals how this combo behaves as resolution increases. At 1080p Low, the system hits 181.2 FPS, which drops to 163.9 FPS at 1440p and 137.2 FPS at 4K. This is a relatively modest decline from 1080p to 4K at Low settings—about 24%—which suggests the GPU is still the primary driver even at the highest resolution. However, the 1080p to 1440p drop at Low is only 17.3 FPS, while the 1440p to 4K drop is 26.7 FPS, indicating that the RTX 3070 Ti starts to feel the pixel-count pressure as you approach 4K.

At High settings, the pattern shifts. The system delivers 108 FPS at 1080p, 97.7 FPS at 1440p, and 78.6 FPS at 4K. The gap between 1440p and 4K here is 19.1 FPS, which is proportionally smaller than at Low settings. This is a classic sign that higher settings increase GPU load, making the graphics card the limiting factor earlier. The data shows that at Ultra, the combo manages 87.5 FPS at 1080p, 76.4 FPS at 1440p, and 69.6 FPS at 4K. The 1080p-to-4K drop at Ultra is only 17.9 FPS, the smallest absolute difference across all settings. This suggests that at Ultra, the GPU is saturated even at 1080p, and raising resolution doesn't hurt as much because the card is already working near its limit.

Looking at Medium settings, the numbers are 111.7 FPS at 1080p, 100 FPS at 1440p, and 89 FPS at 4K. This is the most linear scaling curve in the dataset, with each resolution step costing roughly 10-11 FPS. The behavior across all settings indicates that the RTX 3070 Ti is the dominant component in this pairing. If the i5-11400F were the bottleneck, you would expect to see FPS plateaus at lower resolutions, but instead the numbers keep climbing as resolution drops.

FAQ

*Q: Can this combo handle 4K gaming in Overpower?*

A: Yes, but with caveats. At 4K High, the average FPS is 78.6, and at 4K Ultra it falls to 69.6 FPS. Both are playable, but 4K Low delivers 137.2 FPS, which shows the GPU has headroom if you're willing to drop settings.

Q: Is the Intel Core i5-11400F holding back the RTX 3070 Ti?

A: The data does not show a significant CPU bottleneck. At 1080p Low, the system reaches 181.2 FPS, which is a high frame rate that would expose a weak processor. The i5-11400F's 6 cores and 12 threads, with a boost clock of 4.40 GHz, appear sufficient for this title.

Q: What is the best resolution for this combo?

A: 1440p is the sweet spot. At High settings, it delivers 97.7 FPS, which is close to the 1080p result of 108 FPS but with much better image quality. At 4K, you're under 80 FPS on High, so 1440p gives you the best balance.

Q: How does the RTX 3070 Ti compare to its nearest rivals?

A: The GPU's average benchmark score is 30849, which is 0.3% ahead of the AMD Radeon RX 590 GME and 0.8% behind the AMD Radeon RX 6700. The NVIDIA Quadro M5000 is 0.9% ahead, and the NVIDIA GRID M60-1Q is 1.2% ahead.

Q: What is the CPU's performance percentile?

A: The i5-11400F sits in the 75th percentile among all CPUs. Its average benchmark score is 17181, which is essentially tied with the AMD Ryzen 7 5700U (deltaPct of 0) and the Intel Core i5-1240U (deltaPct of 0.2).

Q: Does the GPU support modern APIs for this game?

A: Yes, the RTX 3070 Ti supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. Its 48 ray tracing cores and 192 tensor cores provide the hardware features expected for a 2023 action title.

Settings Recommendations

For 1080p, the data shows that Low settings are the best choice if you want maximum frame rates, delivering 181.2 FPS. However, the jump from Low to Medium only costs 69.5 FPS (from 181.2 to 111.7), which is still well above 100 FPS. High at 1080p gives 108 FPS, which is nearly identical to Medium at 111.7 FPS—a negligible difference that suggests you should pick the higher visual quality. Ultra at 1080p drops to 87.5 FPS, which is still smooth but a significant step down from High.

At 1440p, the pattern is similar. Low hits 163.9 FPS, Medium delivers exactly 100 FPS, and High comes in at 97.7 FPS. The difference between Medium and High is just 2.3 FPS, so choosing High is a no-brainer for better visuals. Ultra at 1440p drops to 76.4 FPS, which is playable but not ideal for fast-paced action.

For 4K, the data tells a different story. Low settings yield 137.2 FPS, Medium drops to 89 FPS, High to 78.6 FPS, and Ultra to 69.6 FPS. The gap between Medium and High is 10.4 FPS, and between High and Ultra is 9 FPS. At 4K, the recommendation is to stay at High if you want a stable 70+ FPS experience. Medium is the safer bet if you prefer a buffer, but Ultra is only for those who prioritize visuals over frame rate.

Overall, the best experience across all resolutions is High settings. It provides a consistent ~30-40% performance uplift over Ultra while looking nearly as good, based on the measured frame rates.

How This Combo Ranks

This specific combination of Intel Core i5-11400F and NVIDIA GeForce RTX 3070 Ti ranks 691 out of 1744 tested combos in Overpower. That places it in the top 40% of all systems tested, which is respectable given the hardware's age—both components are end-of-life products. The rank reflects the GPU's 74th percentile among all GPUs and the CPU's 75th percentile among all CPUs, showing that neither component is a weak link.

The GPU's nearest rivals include the AMD Radeon RX 6700, which scores 0.8% higher on average. This means the RTX 3070 Ti is essentially on par with that card, but the i5-11400F's performance relative to its peers (0% deltaPct vs the Ryzen 7 5700U) suggests the combo is well-balanced. The ranking data indicates that better combos exist, but this one is far from the bottom of the list. For a 2021 CPU and a 2021 GPU running a 2023 game, the 691st spot out of 1744 is a strong showing.

CPU Role

The Intel Core i5-11400F is a 6-core, 12-thread processor with a base clock of 2.60 GHz and a boost clock of 4.40 GHz. It belongs to the Rocket Lake architecture, built on Intel's 14 nm process. In Overpower, the CPU's role is to feed the RTX 3070 Ti without becoming a limiting factor. The benchmark results show that at 1080p Low, the system achieves 181.2 FPS, which is a high enough frame rate that a weaker CPU would likely cause stuttering or frame drops.

The CPU's 3DMark scores provide context: 868 in single-thread, 1691 in 2-thread, 3171 in 4-thread, 4691 in 8-thread, and 5652 in max-thread tests. These numbers indicate that the i5-11400F scales well with thread count, which is important for a modern game like Overpower that can use multiple cores. The Cinebench R23 multi-core score of 14372 and single-core score of 2029 further confirm that this CPU has enough single-thread performance for gaming.

The L3 cache is 12 MB shared, which is adequate for a mid-range desktop processor. The 65W TDP means it runs cool, but the data shows that the CPU is not the bottleneck in this combo. Even at 1080p Ultra, where the GPU is most stressed, the system still manages 87.5 FPS, proving the i5-11400F can keep pace with the RTX 3070 Ti.

Measured FPS Breakdown

The complete measured FPS data for this combo in Overpower is as follows:

At 1920x1080, the system delivers 181.2 FPS on Low, 111.7 FPS on Medium, 108 FPS on High, and 87.5 FPS on Ultra. The gap between Low and Medium is 69.5 FPS, while the gap between Medium and High is only 3.7 FPS, and between High and Ultra is 20.5 FPS.

At 2560x1440, the results are 163.9 FPS on Low, 100 FPS on Medium, 97.7 FPS on High, and 76.4 FPS on Ultra. The Low-to-Medium drop is 63.9 FPS, Medium-to-High is 2.3 FPS, and High-to-Ultra is 21.3 FPS.

At 3840x2160, the system achieves 137.2 FPS on Low, 89 FPS on Medium, 78.6 FPS on High, and 69.6 FPS on Ultra. The Low-to-Medium drop is 48.2 FPS, Medium-to-High is 10.4 FPS, and High-to-Ultra is 9 FPS.

The data reveals that the performance difference between Medium and High is consistently small across all resolutions (3.7 FPS at 1080p, 2.3 FPS at 1440p, and 10.4 FPS at 4K). This makes High settings the clear choice for visual quality without a meaningful FPS penalty. The Ultra preset, however, costs 20+ FPS at 1080p and 1440p, which is a significant trade-off for the extra visual fidelity. At 4K, the Ultra penalty is smaller (9 FPS), but you're already below 80 FPS, so the benefit is marginal. The RTX 3070 Ti's 8 GB of GDDR6X memory and 608.3 GB/s bandwidth are sufficient to handle these settings, but the data shows diminishing returns past High.