Overpower

Overpower, a 2023 action title, places the Intel Core i5-11400F and NVIDIA GeForce RTX 3050 4 GB combo in a demanding position. The measured data reveals a system that is consistently playable at 1080p with adjustments, but which struggles to maintain smooth frame rates at higher resolutions. This analysis breaks down the benchmark results to understand the relationship between the CPU, GPU, and game settings.

FAQ

Q: What is the best resolution for this combo in Overpower?

A: The data strongly favors 1920x1080. At this resolution, the average frame rates range from 44 FPS on Ultra to 91 FPS on Low, with Medium and High presets hitting 57 FPS and 53 FPS respectively. This is the only resolution where the combo achieves a consistently smooth 60+ FPS experience, and only on the Low preset.

Q: How much of a performance drop is seen when moving from 1440p to 4K?

A: The drop is significant across all settings. For example, on the Low preset, the average FPS falls from 81 at 2560x1440 to 69 at 3840x2160, a decrease of 12 FPS. On the High preset, it drops from 47 FPS to 40 FPS. The Ultra preset sees the most relative difficulty, falling from 39 FPS to 33 FPS.

Q: Does the 4 GB VRAM of the RTX 3050 appear to be a limiting factor?

A: The data suggests it might be a constraint at higher settings. The frame rate difference between the Medium and Low presets is relatively small at all resolutions (e.g., 57 FPS vs 91 FPS at 1080p), while the jump from Medium to Ultra causes a more dramatic drop (57 FPS to 44 FPS at 1080p). This pattern can indicate a memory capacity or bandwidth bottleneck as texture quality increases.

Q: What is the best settings preset for a 60 FPS target at 1080p?

A: According to the measured rows, only the Low preset achieves an average FPS above 60 (91 FPS). The Medium preset comes closest to a 60 FPS experience at 57 FPS, but it does not consistently hit the target, with the minimum recorded FPS at 49.

Q: How does this combo rank against all other tested combinations?

A: The combo is ranked 3268 out of 3713 tested combinations in Overpower. This places it in the lower percentile of all systems, indicating that while it can run the game, most other tested hardware configurations deliver higher performance.

Q: What is the difference in performance between the Low and Ultra presets at 1440p?

A: The difference is substantial. The Low preset averages 81 FPS, while the Ultra preset averages 39 FPS. This represents a performance reduction of over half when switching from the lowest to the highest visual quality settings at 2560x1440.

Settings Recommendations

The measured data provides a clear hierarchy for the best experience. For a target of 60 FPS, the only viable option is the Low preset at 1920x1080, which delivers an average of 91 FPS. If a user is willing to accept a slightly lower frame rate, the Medium preset at 1080p offers an average of 57 FPS with a minimum of 49 FPS, which is a more visually appealing compromise for many players. Pushing to High or Ultra at this resolution drops the average to 53 FPS and 44 FPS, respectively, which may be acceptable for slower-paced action but risks feeling less responsive.

At 2560x1440, the situation becomes more challenging. The Low preset is the only setting that provides a consistently smooth experience, with an average of 81 FPS. The Medium preset at this resolution averages 51 FPS, which is playable but not ideal for a fast-paced action game. High and Ultra presets at 1440p are not recommended, as their average frame rates of 47 FPS and 39 FPS fall below the threshold for a fluid experience. The 4K resolution results are largely experimental, with the Low preset achieving a 69 FPS average, but the Medium preset dipping to 43 FPS and Ultra to 33 FPS, making it unsuitable for serious play.

Given the data, the optimal balance between visual quality and performance is the Medium preset at 1920x1080. It provides a significant visual upgrade over Low while maintaining an average frame rate that is close to the 60 FPS target. For users who prioritize frame rate above all else, the Low preset at 1080p is the definitive choice.

CPU Role

The Intel Core i5-11400F is a 6-core, 12-thread processor from the Rocket Lake generation. Its benchmark scores, such as a Cinebench R23 multi-core score of 14340 and a single-core score of 2024, indicate a capable mid-range desktop CPU. The game's performance scaling across resolutions provides insight into its role. At 1080p, the average frame rates are higher (e.g., 91 FPS on Low) compared to 4K (69 FPS on Low), which suggests that at lower resolutions, the CPU is more capable of feeding frames to the GPU.

However, the performance difference between the 1080p and 1440p Low presets is also notable (91 FPS vs 81 FPS). This indicates that the CPU is not the primary bottleneck in this system. If the CPU were severely limiting, the frame rates would be similar across resolutions. The fact that they decrease as resolution increases points to the GPU becoming the limiting factor. The 6-core/12-thread configuration is likely sufficient for the game's engine, as the frame rate does not collapse at lower resolutions, but the data suggests that the GPU is the component that holds the system back from higher performance.

Resolution Scaling

The measured FPS data shows a clear and consistent decline as resolution increases, which is a classic sign of a GPU-bound scenario. Moving from 1920x1080 to 2560x1440 on the High preset reduces the average frame rate from 53 FPS to 47 FPS. The drop is even more pronounced when moving to 3840x2160, where the High preset averages only 40 FPS. This trend is observed across all quality settings, from Low to Ultra.

This scaling behavior confirms that the NVIDIA GeForce RTX 3050 is the primary limiting component. The GPU's workload increases with the number of pixels, and its 4 GB of VRAM and 192.0 GB/s memory bandwidth are insufficient to maintain high frame rates at higher resolutions. The CPU, with its 12 threads and high single-thread performance, is able to keep up with the GPU's rendering demands at 1080p, but as the pixel count increases, the GPU's limitations become the dominant factor in determining the final frame rate. The gap between 1440p and 4K performance is a direct measure of the GPU's inability to handle the additional pixel fill rate requirements.

How This Combo Ranks

In the database, this specific combination of the Intel Core i5-11400F and the NVIDIA GeForce RTX 3050 4 GB holds a rank of 3268 out of 3713 tested combos in Overpower. This position, in the bottom 12% of all tested systems, suggests that while the hardware is functional, the overall performance is below what most other configurations achieve. The combo's rank is influenced by the GPU's 50th percentile standing among all GPUs and the CPU's 71st percentile among all CPUs. The data implies that the GPU is the weak link in this pairing, as its average performance is lower than the CPU's.

This ranking does not mean the game is unplayable, as the 1080p Low preset results show. It does, however, indicate that the system is not well-suited for high-refresh-rate monitors or high-resolution displays. The measured frame rates at 1440p and 4K are consistently below 60 FPS on most settings, confirming that this combo is best utilized at 1080p with lower graphical presets. The rank serves as a benchmark for what users can expect from this hardware pairing in a demanding 2023 action title.

Measured FPS Breakdown

At 1920x1080, the combo delivers its best performance. The Low preset achieves an average of 91 FPS. The Medium preset averages 57 FPS, with a minimum of 49 FPS and a maximum of 66 FPS. The High preset averages 53 FPS, and the Ultra preset drops to 44 FPS.

At 2560x1440, performance decreases across the board. The Low preset averages 81 FPS. The Medium preset averages 51 FPS, with a minimum of 43 FPS and a maximum of 59 FPS. The High preset averages 47 FPS, and the Ultra preset averages 39 FPS.

At 3840x2160, the data shows the system is under significant strain. The Low preset is the only one to remain above 60 FPS, with an average of 69 FPS. The Medium preset averages 43 FPS, with a minimum of 37 FPS and a maximum of 50 FPS. The High preset averages 40 FPS, and the Ultra preset averages 33 FPS.

GPU Role

The NVIDIA GeForce RTX 3050 4 GB is based on the Ampere architecture and features 2048 shading units, 16 RT cores, and 64 tensor cores. Its 4 GB of GDDR6 memory on a 128-bit bus provides a bandwidth of 192.0 GB/s. The GPU's performance in Overpower is heavily influenced by its memory configuration and raw compute power. The data shows that the GPU is the primary bottleneck in this system, particularly as resolution and settings increase.

The relatively small performance gap between the Medium and Low presets at 1080p (57 FPS vs 91 FPS) is notable. This suggests that even at medium settings, the GPU is nearing its limits, potentially due to VRAM capacity or fill rate constraints. The dramatic drop to the Ultra preset (44 FPS) further reinforces this, as the higher texture and effect quality demands exceed what the 4 GB memory buffer can efficiently handle. The GPU's 50th percentile ranking among all GPUs indicates that it performs at the median level, but in this specific game, its limitations are exposed at higher resolutions. The pixel rate of 55.68 GPixel/s and texture rate of 111.4 GTexel/s are insufficient for the demands of 4K rendering, confirming the GPU as the limiting factor in this pairing.