Overpower

The Intel Core i5-11400F and NVIDIA GeForce RTX 2060 SUPER pairing delivers a playable, though not exceptional, experience in Overpower. The data shows a system that is heavily influenced by resolution and settings, with the GPU acting as the primary bottleneck at higher demands. This analysis breaks down the measured performance to help you understand where this combo stands.

Resolution Scaling

The measured FPS data reveals a clear and predictable scaling pattern as resolution increases from 1920x1080 to 3840x2160. At the "High" preset, the average frame rate drops from 75.1 FPS at 1080p to 66.3 FPS at 1440p, and finally to 58.9 FPS at 4K. This represents a roughly 22% reduction in performance from 1080p to 4K, indicating that the rendering load is scaling significantly with pixel count.

The pattern is even more pronounced at the "Low" preset. Here, the system achieves 128.4 FPS at 1080p, which falls to 114.1 FPS at 1440p and 99.6 FPS at 4K. The fact that even at the lowest settings, 4K performance drops below 100 FPS suggests that the GPU is being saturated by the sheer number of pixels, regardless of the graphical complexity. The difference between 1080p Low and 4K Low is a 28.8 FPS drop, showing that resolution alone is a major performance factor.

At the "Ultra" preset, the scaling is steepest. The system manages 61.5 FPS at 1080p, drops to 57.2 FPS at 1440p, and falls to 45 FPS at 4K. This 4K result is below the 60 FPS target that many consider the baseline for smooth gameplay. The data suggests that at 4K Ultra, the RTX 2060 SUPER is running out of headroom, and the frame rate is likely limited by the GPU's raw compute and memory bandwidth rather than the CPU.

The scaling pattern indicates that the limiting component shifts with resolution. At 1080p, the CPU can likely keep up with the GPU, but as resolution climbs, the GPU becomes the definitive bottleneck. The performance gap between the Low and Ultra presets at 4K (99.6 FPS vs 45 FPS) is a 54.6 FPS difference, highlighting that both settings and resolution are critical levers for this hardware.

How This Combo Ranks

In the grand scheme of tested configurations for Overpower, this combo ranks 1249 out of 1744 tested combos. This places it in the lower-mid tier of performance, meaning a significant portion of other CPU-GPU pairings deliver higher frame rates. The rank is a holistic measure that considers the entire system's performance across all tested scenarios.

The GPU itself sits at the 63rd percentile among all tested GPUs, indicating that it is an average-to-slightly-above-average performer. However, its nearest rivals in the database include the NVIDIA GeForce RTX 2070, which scores 0.5% higher on average. This is a negligible difference, but it shows the RTX 2060 SUPER is at the very edge of its performance class.

The CPU, on the other hand, is at the 75th percentile among all CPUs, suggesting it is a more capable component relative to its peers. Its average benchmark score of 17181 is nearly identical to the AMD Ryzen 7 5700U's 17189 score, with a deltaPct of 0. This means the CPU is not the limiting factor in this pairing. The system's overall rank of 1249 is dragged down by the GPU's more modest standing, confirming that the graphics card is the primary constraint on Overpower performance.

GPU Role

The NVIDIA GeForce RTX 2060 SUPER is built on the Turing architecture and features 8 GB of GDDR6 memory on a 256-bit bus, providing a memory bandwidth of 448.0 GB/s. Its base clock is 1470 MHz, with a boost clock of 1650 MHz. These specifications are directly relevant to the game's results, particularly at higher resolutions where memory bandwidth and fill rate become critical.

The GPU's 7.181 TFLOPS of FP32 compute and its 64 ROPs are responsible for the pixel-pushing power needed at 4K. The benchmark results show that at 1080p Ultra, the system hits 61.5 FPS, but at 4K Ultra, it drops to 45 FPS. This 16.5 FPS decline is a direct consequence of the GPU struggling to process the increased number of pixels. The memory bandwidth of 448.0 GB/s is sufficient for 1080p and 1440p, but at 4K, the demand for texture data and frame buffer access likely exceeds what the card can efficiently deliver.

The GPU's percentile rank of 63 and its average benchmark score of 19774 provide context. Its nearest rival, the RTX 2070, is only 0.5% faster, which explains why the performance in Overpower is not dramatically worse than more modern cards. However, the data shows that the RTX 2060 SUPER is firmly a 1080p and 1440p card for this title. Pushing it to 4K requires a significant drop in settings to maintain playability, as evidenced by the 99.6 FPS result at 4K Low.

FAQ

*Q: Can this combo handle 4K gaming in Overpower?*

A: At 4K Ultra, the system averages 45 FPS, which is below the 60 FPS threshold for smooth play. However, at 4K High, it averages 58.9 FPS, and at 4K Low, it reaches 99.6 FPS. You can play at 4K, but you will need to use lower presets to achieve a fluid experience.

Q: Is the CPU or GPU the bottleneck in this system?

A: The data indicates the GPU is the primary bottleneck. The CPU is at the 75th percentile, while the GPU is at the 63rd. The performance drop from 1080p to 4K is substantial, which is typical of a GPU-limited scenario.

Q: How does the RTX 2060 SUPER compare to its closest rival, the RTX 2070?

A: The RTX 2070 holds a 0.5% higher average benchmark score. This negligible difference translates to very similar performance in Overpower, meaning you would not notice a significant gap between the two cards.

Q: What is the best resolution for this combo to maintain high frame rates?

A: At 1080p, the system delivers over 60 FPS on all presets, including 75.1 FPS on High and 61.5 FPS on Ultra. This makes 1080p the most reliable resolution for high refresh rate gaming.

Q: Does lowering settings from High to Low provide a large performance boost?

A: Yes. At 1440p, the average FPS jumps from 66.3 on High to 114.1 on Low, an increase of 47.8 FPS. This suggests that graphical settings have a substantial impact on the GPU load.

Q: Is this a high-end gaming combo?

A: No. The combo ranks 1249 out of 1744 tested systems, placing it in the lower half of the performance spectrum. It is a mid-range pairing that can handle most games at 1080p and 1440p, but it is not competitive with higher-tier hardware.

Settings Recommendations

Based on the measured data, the ideal settings depend heavily on your target resolution and frame rate. For a 60 FPS target at 4K, the "High" preset is the best choice, as it delivers an average of 58.9 FPS. The "Ultra" preset at 4K drops to 45 FPS, which is too low for smooth gameplay, while "Medium" at 62.9 FPS is barely above the target but offers a slight improvement over High. The "Low" preset at 99.6 FPS is overkill and sacrifices too much visual quality for the performance gain.

At 1440p, the "High" preset provides a solid 66.3 FPS, which is a good balance of visual fidelity and performance. The "Ultra" preset at 57.2 FPS is just below the 60 FPS mark, making it a less desirable option if you prefer a consistent frame rate. The "Medium" preset at 71.3 FPS is the best choice for those who want a comfortable margin above 60 FPS without the visual hit of "Low."

For 1080p, the "Ultra" preset is the recommended choice, as it delivers 61.5 FPS and fully utilizes the hardware. If you have a high refresh rate monitor, the "High" preset at 75.1 FPS or even "Medium" at 82 FPS will provide a smoother experience with reduced graphical detail. The "Low" preset at 128.4 FPS is unnecessary unless you are targeting extremely high frame rates.

The data generally suggests that the "High" preset is the sweet spot for this combo, offering the best compromise between visual quality and performance across all resolutions. It maintains playable frame rates at 4K and provides a comfortable experience at 1440p and 1080p.

CPU Role

The Intel Core i5-11400F is a 6-core, 12-thread processor from the Rocket Lake architecture, with a base clock of 2.60 GHz and a boost clock of 4.40 GHz. It has a 12 MB shared L3 cache and supports dual-channel DDR4 memory with a bandwidth of 51.2 GB/s. This CPU is not the limiting factor in Overpower, as evidenced by its high percentile rank of 75.

The CPU's average benchmark score of 17181 is essentially tied with its nearest rivals, such as the AMD Ryzen 7 5700U, which has a deltaPct of 0. This indicates that the i5-11400F is a solid performer for its class. In the game, the CPU's role is to feed the GPU with draw calls and handle game logic. The fact that frame rates drop significantly from 1080p to 4K suggests that the CPU is not being saturated, as the GPU is taking longer to render each frame.

The CPU's boost clock of 4.40 GHz and its 12 threads are more than adequate for Overpower, which is an Action title that likely benefits from high single-thread performance. The measured FPS at 1080p Low (128.4 FPS) shows that the CPU can push frames well above 120 FPS when the GPU is not the bottleneck. This confirms that the i5-11400F has enough headroom to avoid holding back the RTX 2060 SUPER in most scenarios. The CPU's 65W TDP and 14nm process are not directly reflected in the game's performance, but they do indicate its efficiency class. Overall, the data shows a well-balanced CPU that will not require an upgrade if you are seeking to improve Overpower performance; the GPU should be your focus.