Overpower

Overpower, the 2023 action title, presents a demanding workload that stresses both the AMD Ryzen 9 5950X and NVIDIA GeForce RTX 4060 in distinct ways. Based on the measured frame rates, this combination delivers a playable experience across most settings, though the data reveals a clear progression in performance scaling as resolution and graphical fidelity increase. The benchmark results show a system where the GPU becomes the primary constraint at higher resolutions, while the CPU's strong multi-threaded capabilities ensure consistent frame delivery at lower settings.

Resolution Scaling

The measured FPS data for this combo shows a predictable yet informative scaling pattern as resolution increases from 1920x1080 to 3840x2160. At Low settings, the average frame rate drops from 153 FPS at 1080p to 137 FPS at 1440p, representing a 10.5% decrease, and then further to 116 FPS at 4K, which is a 24.2% reduction from the 1080p baseline. This scaling indicates that even at the lowest settings, the GPU is still the limiting factor at higher resolutions, though the CPU is clearly capable of feeding the graphics card at high frame rates.

Moving to Medium settings, the averages fall from 96 FPS at 1080p to 85 FPS at 1440p (an 11.5% drop) and then to 73 FPS at 4K (a 24% drop from 1080p). The consistency of these percentage drops across Low and Medium settings suggests a linear scaling behavior tied to pixel count, which is typical for a GPU-bound scenario. The High preset shows a slightly different pattern, with scores of 89, 79, and 67 FPS across the three resolutions, representing declines of 11.2% and 24.7%, respectively.

The Ultra preset delivers the most demanding workload, with averages of 74 FPS at 1080p, 66 FPS at 1440p, and 56 FPS at 4K. The percentage drops from 1080p to 1440p (10.8%) and to 4K (24.3%) remain consistent with the other presets, reinforcing that resolution scaling is the dominant factor. This data suggests that the RTX 4060's 8 GB VRAM and 128-bit memory bus are sufficient for this game at all tested resolutions, but the GPU's raw compute power becomes increasingly strained as pixel count rises. The fact that 4K Ultra still manages 56 FPS average indicates the game is not excessively VRAM-hungry, but rather compute-limited at this resolution.

GPU Role

The NVIDIA GeForce RTX 4060, built on the Ada Lovelace architecture with a 5 nm process, operates with a base clock of 1830 MHz and a boost clock of 2460 MHz. Its 8 GB of GDDR6 memory on a 128-bit bus provides 272.0 GB/s of bandwidth, which appears adequate for Overpower's needs across all tested configurations. The GPU's benchmark scores place it at the 61st percentile among all GPUs, with an average benchmark score of 17639, putting it in direct competition with the AMD Radeon HD 7790 (deltaPct -0.2) and AMD Radeon 780M (deltaPct +0.3).

The measured frame rates show that the RTX 4060 is the primary bottleneck at 4K resolution, particularly at Ultra settings where the average drops to 56 FPS. This is a 24.3% reduction from the 74 FPS at 1080p Ultra, which aligns with the pixel count increase of 4.5x. The fact that the frame rate does not drop by the full 4.5x suggests that other factors, such as CPU performance or game optimizations, are mitigating some of the load. At 1440p, the GPU still holds up well, with all presets except Ultra maintaining averages above 79 FPS.

The GPU's 3072 shading units, 96 texture mapping units, and 48 render output units provide a balanced configuration for this title. The 24 RT cores and 96 tensor cores, while present, do not appear to be heavily utilized based on the measured data, as the frame rates scale linearly with resolution rather than showing spikes from ray tracing or DLSS workloads. The 15.11 TFLOPS FP32 performance and 236.2 GTexel/s texture rate are sufficient for 1080p and 1440p gaming, but the 4K Ultra results indicate the card is nearing its computational limits for this game.

CPU Role

The AMD Ryzen 9 5950X, with its 16 cores and 32 threads based on the Zen 3 architecture, provides substantial headroom for Overpower's CPU demands. Its base clock of 3.40 GHz and boost clock of 4.90 GHz, combined with 64 MB of L3 cache, deliver strong single-threaded and multi-threaded performance. The CPU's benchmark scores place it at the 91st percentile among all CPUs, with an average benchmark score of 51947, making it competitive with the Intel Core Ultra 5 235HX (deltaPct -0.2) and AMD EPYC 8124P (deltaPct -0.3).

The CPU's multi-threaded capabilities are demonstrated by its Cinebench R23 multicore score of 26017 and 3DMark max threads score of 11597. These figures suggest that the 5950X is unlikely to bottleneck the RTX 4060 in Overpower, even at lower resolutions where frame rates exceed 150 FPS. The 153 FPS average at 1080p Low is a strong indicator that the CPU can feed the GPU sufficiently at high refresh rates, and the consistent scaling across resolutions points to a GPU-bound scenario throughout the tests.

However, the CPU's single-threaded performance, as measured by its 3DMark single thread score of 944 and Cinebench R15 single core score of 266.5, may become more relevant in CPU-intensive scenes that are not captured by these average frame rate metrics. The 5950X's 105W TDP and dual-channel DDR4 memory support provide adequate bandwidth for this game, though the 51.2 GB/s memory bandwidth is modest compared to newer platforms. The data indicates that for this specific title, the CPU is not the limiting component, as frame rates drop consistently with resolution increases rather than showing CPU-related stalls.

How This Combo Ranks

Within the benchmark database, this combination of the AMD Ryzen 9 5950X and NVIDIA GeForce RTX 4060 ranks 2005 out of 3713 tested combos for Overpower, placing it in the 54th percentile of all combinations. This mid-range ranking reflects the balance between the high-end CPU and mid-range GPU, where the CPU's strength does not fully compensate for the GPU's limitations in this title. The ranking suggests that many other combinations, likely with more powerful GPUs, achieve higher frame rates in Overpower.

The CPU's position at the 91st percentile among all CPUs, coupled with the GPU's 61st percentile ranking, creates an interesting dynamic. The 5950X outperforms many newer CPUs in multi-threaded workloads, as evidenced by its positive deltaPct of 0.4 relative to the Intel Core i9-13900F and its competitive standing against the Intel Core i7-14700 (deltaPct -0.7). However, the RTX 4060's GPU benchmark average of 17639 places it just above the AMD Radeon 780M (deltaPct +0.3) and AMD Radeon Pro 560 (deltaPct +0.5), which are notably less powerful discrete or integrated solutions.

This combination's rank of 2005 out of 3713 indicates that while it is not at the bottom of the performance spectrum, it is also far from the top. The data shows that the CPU is capable of supporting a more powerful GPU, as its benchmarks are far above what the RTX 4060 can utilize in this game. The 54th percentile ranking suggests that users seeking higher frame rates in Overpower would benefit more from a GPU upgrade than a CPU upgrade, as the 5950X already provides ample processing power for this title.

Settings Recommendations

Based on the measured FPS data, the optimal balance between visual quality and performance for this combo is the High preset at 1440p, which delivers an average of 79 FPS. This provides a smooth experience on most displays while maintaining good visual fidelity. For users prioritizing maximum frame rates, the Low preset at 1080p offers 153 FPS average, which is ideal for high-refresh-rate monitors but sacrifices visual quality.

At 1080p, the Medium preset with an average of 96 FPS (min 81, max 110) provides a good middle ground, offering better visuals than Low while still maintaining frame rates above 90 FPS. The Ultra preset at 1080p drops to 74 FPS average, which is still playable but represents a 23% reduction from High settings. For 1440p gaming, the Medium preset at 85 FPS (min 73, max 98) is the recommended choice for those seeking a balance, while High at 79 FPS is acceptable for users who prefer higher visual settings.

At 4K, the data suggests that only the Low preset (116 FPS average) provides a consistently smooth experience, as Medium drops to 73 FPS and High falls to 67 FPS. The Ultra preset at 4K with 56 FPS average is borderline playable but may result in noticeable frame pacing issues during action sequences. For 4K gaming, users should consider the Low or Medium presets to maintain frame rates above 70 FPS, as the RTX 4060's performance at this resolution is limited.

Measured FPS Breakdown

The complete measured FPS data for this combo is as follows:

At 1920x1080, the Low preset achieves an average of 153 FPS, with no minimum or maximum recorded. Medium settings produce an average of 96 FPS, with a minimum of 81 FPS and maximum of 110 FPS. High settings yield an average of 89 FPS, and Ultra settings drop to an average of 74 FPS. The spread between Low and Ultra at 1080p is 79 FPS, indicating a significant impact from graphical settings.

At 2560x1440, the Low preset averages 137 FPS, while Medium delivers 85 FPS (min 73, max 98). High settings average 79 FPS, and Ultra settings average 66 FPS. The difference between Low and Ultra at 1440p is 71 FPS, slightly less than at 1080p due to the GPU becoming more of a bottleneck.

At 3840x2160, the Low preset averages 116 FPS, Medium averages 73 FPS (min 62, max 84), High averages 67 FPS, and Ultra averages 56 FPS. The gap between Low and Ultra at 4K narrows to 60 FPS, further confirming that the GPU is the limiting factor at this resolution. The data shows consistent performance degradation as settings increase, with the most significant drops occurring between Low and Medium presets across all resolutions.

FAQ

Q: What is the best resolution and settings combo for this hardware in Overpower?

A: The 1440p High preset provides an average of 79 FPS, offering a good balance between visual quality and smoothness. For maximum frame rates, 1080p Low achieves 153 FPS average, while 4K is only recommended at Low settings (116 FPS average) for consistent performance.

Q: How does the RTX 4060's 8 GB VRAM affect 4K performance?

A: The 8 GB VRAM appears sufficient for Overpower at 4K, as the GPU still achieves 56 FPS average at Ultra settings. The frame rate drops from 1080p to 4K are consistent across presets, suggesting compute limitations rather than VRAM capacity issues.

Q: Is the Ryzen 9 5950X bottlenecking the RTX 4060 in this game?

A: No, the data indicates the CPU is not the limiting factor. At 1080p Low, the combo reaches 153 FPS, and frame rates scale consistently with resolution, suggesting a GPU-bound scenario. The 5950X's 91st percentile CPU ranking provides ample headroom.

Q: How does this combo rank compared to other tested configurations?

A: This combination ranks 2005 out of 3713 tested combos for Overpower, placing it in the 54th percentile. The CPU ranks at the 91st percentile among all CPUs, while the GPU sits at the 61st percentile, indicating the CPU is underutilized relative to its capabilities.

Q: What is the difference in performance between Medium and High settings?

A: At 1080p, Medium averages 96 FPS while High averages 89 FPS, a difference of 7 FPS. At 1440p, the gap narrows to 6 FPS (85 vs 79), and at 4K it reduces to 6 FPS (73 vs 67). The consistent small gap suggests that High settings offer minimal performance cost for improved visuals.

Q: Can this hardware handle 4K gaming in Overpower?

A: Yes, but only at lower settings. The Low preset at 4K achieves 116 FPS average, while Medium drops to 73 FPS and Ultra falls to 56 FPS. For a stable 60 FPS experience, Medium settings are the maximum recommended at 4K.