Overpower

The AMD Ryzen 9 5900X paired with the NVIDIA GeForce RTX 2070 SUPER presents a specific performance profile in the action title Overpower, where the measured data reveals a system that is heavily influenced by graphical settings and resolution. This analysis breaks down the benchmark results, focusing on where the bottleneck lies and how the combination ranks among other tested hardware pairings.

Resolution Scaling

The measured FPS data for this combo shows a clear and predictable scaling pattern as resolution increases, but the degree of the drop-off varies significantly depending on the quality preset. At 1080p with Low settings, the system achieves an average of 142.2 FPS. Moving to 1440p at the same Low preset, the average drops to 126.2 FPS, a reduction of 16 FPS. At 4K with Low settings, the average falls further to 111 FPS. This progression indicates that even at lower graphical loads, the GPU is still the primary driver of performance, though the CPU is capable of feeding it adequately at these frame rates.

The scaling behavior changes more dramatically when the graphical preset is increased. At the High preset, the system delivers 81.9 FPS at 1080p, which drops to 74.2 FPS at 1440p and then to 64.4 FPS at 4K. The gap between 1080p and 4K at High settings is 17.5 FPS. This pattern suggests that as the settings increase, the workload on the GPU grows, making the resolution scaling more pronounced. The RTX 2070 SUPER, with its 8 GB of GDDR6 memory and 256-bit bus, is being tasked with more complex rendering, which directly impacts the average frame rate.

The most telling data point for identifying the limiting component comes from the Ultra preset. Here, the average FPS at 1080p is 70.4, at 1440p it is 63.8, and at 4K it falls to 51.3. The difference between 1080p and 4K at Ultra settings is 19.1 FPS, which is the largest absolute drop across all presets. This steep decline at the highest settings, coupled with the fact that even at 1080p Ultra the system cannot maintain a high frame rate, points strongly to the GPU being the primary bottleneck in this configuration. The data implies that the Ryzen 9 5900X has ample headroom, as the frame rate is consistently capped by the graphics card's rendering capabilities, especially when the pixel shader and texture workloads increase.

CPU Role

The AMD Ryzen 9 5900X is a 12-core, 24-thread processor based on the Zen 3 architecture, with a base clock of 3.70 GHz and a boost clock of 4.80 GHz. In Overpower, the CPU's role appears to be that of a stable foundation rather than a performance limiter. The benchmark scores for the processor are strong, with a 3DMark max threads score of 10075 and a Cinebench R23 multicore score of 33150, indicating substantial multi-threaded capability. However, the game's performance metrics do not show a scenario where the CPU is struggling to keep up.

The data shows that at lower resolutions and settings, where the GPU load is reduced, the frame rates scale upward to 142.2 FPS at 1080p Low. This suggests the CPU can handle the game's simulation and draw calls efficiently at these levels. The processor's high single-thread performance, evidenced by a 3DMark single thread score of 941 and a Cinebench R23 singlecore score of 4680, is sufficient for the game's logic. The 12 cores and 24 threads provide significant headroom for background tasks and any potential multi-threaded game features, but the benchmark results do not indicate that the game is heavily utilizing this capacity to the point of bottlenecking.

When comparing the CPU to its nearest rivals, the data shows a balanced picture. The Ryzen 9 5900X has an average benchmark score of 39453, which is nearly identical to the AMD EPYC 4245P (39383, deltaPct 0.2) and the Intel Core i7-13700F (39095, deltaPct 0.9). It is slightly behind the Intel Core i7-13700 (39857, deltaPct -1) and the AMD Ryzen 7 PRO 8845HS (39747, deltaPct -0.7). This indicates that the CPU's performance is in line with other high-end processors, and it is not a weak link in this pairing. The data strongly suggests that in Overpower, the GPU is the component dictating the final frame rate, especially as resolution and settings increase.

GPU Role

The NVIDIA GeForce RTX 2070 SUPER is the defining component in this benchmark analysis, as the measured FPS data shows it is the primary performance constraint for the Ryzen 9 5900X. The GPU features 8 GB of GDDR6 memory on a 256-bit bus, providing a memory bandwidth of 448.0 GB/s, and has a boost clock of 1770 MHz. These specifications are sufficient for 1080p and 1440p gaming, but the data shows that they are challenged at 4K, particularly with higher quality presets.

The GPU's performance in Overpower is clearly demonstrated by the resolution scaling. At 4K Ultra, the average FPS drops to 51.3, which is below the ideal threshold for smooth gameplay. Even at 4K High, the average is only 64.4 FPS. This indicates that the 8 GB VRAM and the GPU's compute capabilities (9.062 TFLOPS FP32) are being pushed to their limits. The 12 nm Turing architecture, while capable, does not provide the raw power needed to maintain high frame rates at 4K with demanding settings.

The GPU's benchmark scores place it in a mid-range position. It has a percentile ranking of 65 among all GPUs and an average benchmark score of 22206. Its nearest rivals include the NVIDIA RTX A400 (22307, deltaPct -0.5) and the NVIDIA GeForce GTX TITAN Z (22006, deltaPct 0.9), showing it performs on par with older high-end cards. It is also close to the AMD Radeon RX 5700 (21670, deltaPct 2.5) and the NVIDIA GeForce RTX 4060 Mobile (22729, deltaPct -2.3). This data confirms that the RTX 2070 SUPER is a capable mid-range card, but it is not designed for maxed-out 4K gaming. In this combo, the GPU's role is to deliver playable frame rates at 1080p and 1440p, while 4K requires a reduction in graphical settings to remain fluid.

How This Combo Ranks

In the overall database of tested hardware combinations for Overpower, this specific pairing of the AMD Ryzen 9 5900X and NVIDIA GeForce RTX 2070 SUPER holds a rank of 1056 out of 1744 combinations. This places it in the lower half of all tested configs, which is a direct result of the GPU's mid-range standing. The CPU is a high-end part, but the GPU's performance ceiling prevents the combo from achieving a higher rank.

The ranking is a holistic measure that likely accounts for average performance across various resolutions and settings. Given that the RTX 2070 SUPER struggles in 4K scenarios, the combo's overall score is dragged down despite the CPU's strong benchmark results. The data shows that while the CPU is a top-tier component, the GPU is the limiting factor for the combo's rank. This is a classic case of a pairing where the CPU has more potential than the GPU can utilize in a graphics-intensive game like Overpower.

For users looking at this data, the rank of 1056 indicates that this is not a top-tier gaming setup for this specific title. It is a balanced mid-range system that will provide good performance at 1080p and 1440p, but it will not compete with high-end combos that feature more powerful GPUs. The CPU's headroom suggests that an upgrade to a more powerful GPU would significantly improve the combo's rank, but as tested, the RTX 2070 SUPER holds the system back from higher standings.

Settings Recommendations

Based on the measured FPS values, the optimal settings for this combo depend on the user's resolution and performance targets. For 1080p gaming, the data shows that the High preset delivers an average of 81.9 FPS, which is smooth and responsive. The Ultra preset at 1080p averages 70.4 FPS, which is still playable, but the High preset provides a better balance of visual quality and frame rate headroom. The Medium preset at 1080p gives 88.4 FPS, which is also excellent, but High is the recommended choice for a better visual experience without sacrificing too much performance.

At 1440p, the High preset yields an average of 74.2 FPS, which is a solid result for a demanding resolution. The Medium preset is close behind at 77.7 FPS, while Ultra drops to 63.8 FPS. For 1440p, the High preset is the recommended setting as it provides a good balance between clarity and performance, keeping the frame rate above 70 FPS. The Low preset at 1440p hits 126.2 FPS but sacrifices too much visual fidelity.

For 4K gaming, the data shows that the hardware is not well-suited for high settings. The Ultra preset averages just 51.3 FPS, which may be acceptable for some single-player games but is not ideal. The High preset at 4K averages 64.4 FPS, which is more playable but still below the 60 FPS target for many. The Medium preset at 4K averages 69 FPS, providing the best performance-to-quality ratio at this resolution. The recommendation for 4K is to use the Medium preset to maintain a smoother experience. The Low preset at 4K offers 111 FPS, but the visual compromise is significant. The data suggests that for the best overall experience across all resolutions, the High preset at 1080p or 1440p is the sweet spot for this combo.

Measured FPS Breakdown

The following table presents the exact measured average FPS for each resolution and settings combination.

| Resolution | Settings | Average FPS |

| :--------- | :------- | :---------- |

| 3840x2160 | High | 64.4 |

| 3840x2160 | Low | 111.0 |

| 3840x2160 | Medium | 69.0 |

| 3840x2160 | Ultra | 51.3 |

| 2560x1440 | High | 74.2 |

| 2560x1440 | Low | 126.2 |

| 2560x1440 | Medium | 77.7 |

| 2560x1440 | Ultra | 63.8 |

| 1920x1080 | High | 81.9 |

| 1920x1080 | Low | 142.2 |

| 1920x1080 | Medium | 88.4 |

| 1920x1080 | Ultra | 70.4 |

The data reveals a consistent pattern: the average FPS decreases as both resolution and settings increase. The largest raw performance gain comes from switching from Ultra to Low settings, which at 1080p is a jump from 70.4 to 142.2 FPS. The differences between presets are more pronounced at higher resolutions, with the gap between Low and Ultra at 4K being 59.7 FPS. This breakdown confirms that the RTX 2070 SUPER's performance is the primary variable in this system, with the CPU maintaining a consistent and capable baseline. The numbers show that for a locked 60 FPS experience, users should target High settings at 1440p or Medium settings at 4K.