Overpower

The AMD Ryzen 7 9700F and AMD Radeon RX 580 combination produces a functional but constrained experience in Overpower, with performance heavily dependent on resolution and settings. The data shows a pairing where a modern, high-end CPU is bottlenecked by an older, mid-range GPU, resulting in frame rates that are playable at lower settings but struggle at higher presets and resolutions.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 7 9700F is an 8-core, 16-thread processor built on the Zen 5 architecture, codenamed Granite Ridge. It operates with a base clock of 3.80 GHz and a boost clock of 5.50 GHz, drawing a 65 W TDP. This is a desktop part with a 4 nm process node and a 32 MB shared L3 cache, designed for the AMD Socket AM5 platform. Its benchmark scores reflect a strong general-purpose processor: it achieves a Passmark single-thread score of 4691 and a multi-thread score of 36470, placing it in the 94th percentile of all CPUs.

In Overpower, the CPU’s role is to feed the GPU with data, and at lower settings, the processor’s headroom is evident. At 1920x1080 with Low settings, the combo reaches 69 FPS, while at Low settings at 2560x1440 it hits 62 FPS. This suggests the CPU is not the limiting factor at these configurations. However, the gains from lowering resolution are minimal compared to what a stronger GPU would deliver, indicating that the RX 580 is the primary bottleneck. The CPU’s high single-thread performance, as shown by its 4691 Passmark score, ensures that it can handle the game’s logic and physics without dragging down the average frame rate, but it cannot compensate for the GPU’s limitations.

The processor’s nearest rivals, based on average benchmark scores, include the AMD Ryzen 9 7940HX (0.2% higher score) and the Intel Core i7-14700KF (0.2% lower score). These deltas are negligible, meaning the 9700F’s performance is on par with those parts. For Overpower, this means the CPU is not a differentiator; the data shows that the frame rate differences across settings are more attributable to the GPU. The 9700F’s 8 cores and 16 threads provide ample parallel processing for modern games, but the game’s performance ceiling here is set by the graphics card. At Ultra settings, the average FPS drops to 33 at 1080p, 30 at 1440p, and 25 at 4K, which are all GPU-bound results. The CPU’s strong Passmark physics score of 2122 and integer math score of 120788 suggest it is well-equipped to handle game calculations, but these strengths do not translate into higher frame rates when the GPU is saturated.

GPU Role — VRAM, clocks, and how they relate to this game's results

The AMD Radeon RX 580 is a veteran graphics card, built on the GCN 4.0 architecture with the Polaris 20 chip, manufactured on a 14 nm process. It features 8 GB of GDDR5 memory on a 256-bit bus, with a memory clock of 2000 MHz (8 Gbps effective) and a bandwidth of 256.0 GB/s. The GPU has a base clock of 1257 MHz and a boost clock of 1340 MHz, with 2304 shading units. Its compute power is rated at 6.175 TFLOPS for FP32, and it supports DirectX 12 (12_0), Vulkan 1.3, and OpenGL 4.6. The card’s benchmark performance places it in the 53rd percentile of all GPUs, with a Passmark G3D score of 8813 and a DirectX 12 score of 43.

In Overpower, the RX 580’s performance is the defining factor. At 1920x1080 with Low settings, the combo achieves an average of 69 FPS, which drops to 62 FPS at 1440p and 52 FPS at 4K. This scaling shows that the GPU has some headroom at lower resolutions but quickly becomes overwhelmed. At Medium settings, the average FPS is 43 at 1080p, 38 at 1440p, and 33 at 4K, with minimum FPS recorded at 37, 33, and 28 respectively. The High preset yields 40 FPS at 1080p, 36 at 1440p, and 30 at 4K. At Ultra, the card struggles significantly, with averages of 33, 30, and 25 FPS across the three resolutions.

The RX 580’s nearest rivals, based on average benchmark scores, include the NVIDIA GeForce RTX 3050 Ti Mobile (0.1% lower score) and the NVIDIA GeForce GTX 1660 SUPER (0.4% lower score). These deltas are tiny, indicating that the RX 580 performs within the same range as those cards. For Overpower, this means the GPU is a mid-range part that can handle the game at lower settings but is not suitable for high-fidelity experiences. The 8 GB VRAM is sufficient for the game’s textures, but the raw compute power of 6.175 TFLOPS is the limiting factor. The data shows a clear pattern: lowering settings from Ultra to Low yields a substantial FPS increase (e.g., from 33 to 69 at 1080p), while lowering resolution from 4K to 1080p at the same settings yields a smaller but still significant gain (e.g., from 30 to 40 at High). This suggests that the GPU is the primary constraint, and users should prioritize settings over resolution to achieve playable frame rates.

FAQ

*Q: What is the best average FPS this combo can achieve in Overpower?*

A: The highest average FPS recorded is 69 FPS, achieved at 1920x1080 resolution with Low settings.

Q: How does the CPU’s performance compare to its nearest rivals?

A: The AMD Ryzen 7 9700F has an average benchmark score of 69996, which is 0.2% higher than the AMD Ryzen 9 7940HX and 0.2% lower than the Intel Core i7-14700KF, indicating near-identical performance.

Q: Is the GPU or CPU the bottleneck in this setup?

A: The data indicates the GPU is the primary bottleneck, as lowering settings from Ultra to Low at any resolution yields a significant FPS increase (e.g., from 33 to 69 at 1080p), while the CPU’s strong single-thread score of 4691 suggests it is not limiting performance.

Q: What is the lowest average FPS recorded?

A: The lowest average FPS is 25, recorded at 3840x2160 resolution with Ultra settings.

Q: How does the GPU’s benchmark score compare to its nearest rivals?

A: The AMD Radeon RX 580 has an average benchmark score of 12928, which is 0.1% lower than the NVIDIA GeForce RTX 3050 Ti Mobile and 0.4% lower than the NVIDIA GeForce GTX 1660 SUPER.

Q: Can this combo maintain 60 FPS at any settings?

A: Yes, the combo achieves 69 FPS at 1920x1080 with Low settings, but at Medium settings it drops to 43 FPS, and at High it is 40 FPS.

How This Combo Ranks

The AMD Ryzen 7 9700F and AMD Radeon RX 580 combination ranks 2724 out of 2980 tested combos in Overpower. This places it in the bottom 9% of all combinations, reflecting a significant performance deficit. The rank is driven almost entirely by the GPU, as the CPU is a high-end part with a 94th percentile ranking among all CPUs, while the GPU sits in the 53rd percentile. The disparity is clear: the CPU’s average benchmark score of 69996 is on par with parts like the AMD Ryzen 9 7950X (0.7% higher) and Intel Core i7-14700K (0.9% higher), but the GPU’s average score of 12928 is comparable to the AMD Radeon 740M (0.5% higher) and AMD FirePro W5100 (0.6% higher).

This ranking means that in a database of nearly 3000 tested combinations, this setup is near the bottom for Overpower. The data shows that the combo’s performance is not competitive with even mid-range pairings, as the GPU’s age and architecture limit its ability to handle the game’s demands. The rank is consistent with the measured FPS: the combo only exceeds 60 FPS at the lowest settings on 1080p, and falls below 30 FPS at 4K Ultra. For users expecting a smooth experience, this ranking is a warning that the RX 580 is a severe bottleneck. The CPU has the potential to drive much higher frame rates, but it is held back by the GPU’s compute capability of 6.175 TFLOPS and its DirectX 12 score of 43. The combo’s rank of 2724 out of 2980 is a clear indicator that this is a mismatched pairing for Overpower, with the GPU being the weakest link.

Measured FPS Breakdown

The measured FPS data for this combo spans three resolutions and four settings presets, providing a comprehensive view of its capabilities. At 1920x1080, the combo achieves its best performance with Low settings, averaging 69 FPS. Medium settings reduce this to 43 FPS, with a minimum of 37 and a maximum of 50. High settings yield 40 FPS, and Ultra drops to 33 FPS. The pattern shows a steep decline from Low to Medium (a 26 FPS drop) and a more gradual decline from Medium to Ultra (a 10 FPS drop). This suggests that the GPU’s fillrate and shading units are the limiting factors, as the jump from Low to Medium introduces more graphical effects that the Polaris 20 chip cannot handle efficiently.

At 2560x1440, the results are lower across the board. Low settings average 62 FPS, which is still playable. Medium settings average 38 FPS (min 33, max 44), High averages 36 FPS, and Ultra averages 30 FPS. The difference between Low and Medium is 24 FPS, similar to the 1080p gap, indicating that the GPU is consistently bottlenecked by the same factors. At 4K (3840x2160), the combo struggles. Low settings average 52 FPS, Medium averages 33 FPS (min 28, max 38), High averages 30 FPS, and Ultra averages 25 FPS. The transition from Low to Medium at 4K is a 19 FPS drop, showing that the GPU’s 256-bit memory bus and 256.0 GB/s bandwidth are insufficient for high-resolution textures and effects.

Comparing resolutions, the data shows that lowering resolution from 4K to 1080p at the same settings yields a consistent improvement: Low settings improve from 52 to 69 FPS (a 33% increase), Medium from 33 to 43 FPS (a 30% increase), High from 30 to 40 FPS (a 33% increase), and Ultra from 25 to 33 FPS (a 32% increase). This linear scaling indicates that the GPU is resolution-bound, and users can expect similar relative gains from dropping resolution. The minimum FPS values, where available, show that the combo can dip below 30 FPS at Medium settings on all resolutions (37 at 1080p, 33 at 1440p, 28 at 4K), which may cause noticeable stutter in fast-paced action. The maximum FPS values are also modest, capping at 50 FPS at 1080p Medium, indicating that the GPU cannot push beyond a certain threshold.

Settings Recommendations

Based on the measured FPS data, the optimal experience for this combo in Overpower is achieved with Low settings at 1920x1080, which delivers an average of 69 FPS. This is the only configuration that consistently stays above 60 FPS, providing a smooth gameplay experience. Low settings at 2560x1440 (62 FPS) are also viable for users with a 1440p monitor, offering a playable frame rate with a slight resolution advantage. However, any setting above Low at 1080p results in a significant FPS drop: Medium averages 43 FPS, which is below the 60 FPS threshold for fast-paced action games. The minimum FPS of 37 at Medium indicates that frame pacing could be inconsistent.

For users who prioritize visual quality over frame rate, Medium settings at 1080p (43 FPS) or High settings at 1080p (40 FPS) are the highest presets that remain above 30 FPS, but they are not recommended for competitive play. The data shows that Ultra settings at any resolution are not viable, with averages of 33 FPS at 1080p, 30 FPS at 1440p, and 25 FPS at 4K, all of which fall below the playable threshold. The 4K resolution should be avoided entirely, as even Low settings only achieve 52 FPS, and Medium dips to 33 FPS with a minimum of 28 FPS.

Given the GPU’s benchmark performance (Passmark G3D score of 8813 and a 53rd percentile ranking), the best balance between visual fidelity and performance is Low settings at 1080p or 1440p. Lowering the resolution to 1080p is more effective than lowering settings from Medium to Low, as the FPS gain from reducing resolution is consistent (e.g., from 43 to 69 FPS at Low). The data suggests that users should prioritize resolution reduction to 1080p and then adjust settings from there. If a stable 60 FPS is the goal, Low settings at 1080p is the only option. For a more stable 30 FPS experience, Medium settings at 1080p (43 FPS) or High settings at 1440p (36 FPS) are acceptable, but the user must accept the risk of frame drops below 30 FPS, as seen in the minimum FPS values. The RX 580’s age and 6.175 TFLOPS compute limit its ability to handle the game’s higher presets, and the measured data confirms that the most enjoyable experience is at the bottom of the settings ladder.