Overpower

The AMD Ryzen 7 7700X and NVIDIA GeForce RTX 3060 Ti combination delivers a measured performance profile in Overpower that is shaped by the GPU's resolution scaling and the CPU's strong multi-threaded headroom. The CPU has a launch MSRP of $399, and the GPU has a launch MSRP of 399 USD. Across 1080p, 1440p, and 4K, the average FPS ranges from 44.8 at 4K Ultra to 127.6 at 1080p Low, with the combo ranking 1291 out of 1744 tested combinations.

Resolution Scaling

The measured FPS values show a clear downward trend as resolution increases, regardless of preset. At Low settings, the average FPS moves from 127.6 at 1080p to 115.3 at 1440p and 96.9 at 4K. At Medium, the values are 79.8, 74.1, and 60.9. At High, they are 73.3, 66, and 56.5. At Ultra, they are 63.5, 58.1, and 44.8. The pattern is consistent: every step from 1080p to 1440p to 4K reduces the average FPS, and the reduction is more pronounced at higher presets. For example, the Ultra preset at 4K produces the lowest measured average of 44.8 FPS, while the Low preset at 4K still manages 96.9 FPS.

This scaling behavior indicates that the GPU becomes the primary limiting component as resolution climbs. The CPU's performance is largely independent of resolution, so the FPS drop is attributable to the GPU's rendering workload. The RTX 3060 Ti's 8 GB GDDR6 memory and 448.0 GB/s bandwidth are the specifications most directly tied to resolution scaling. At 1080p, the GPU has ample headroom, as even Ultra stays above 60 FPS. At 1440p, only Ultra falls below 60, at 58.1 FPS. At 4K, the GPU's limits become apparent: High and Ultra drop to 56.5 and 44.8 FPS, respectively, while Low and Medium remain above 60. The data suggests that the GPU's memory capacity and bandwidth are sufficient for 1080p and 1440p, but at 4K the rendering load outpaces the GPU's capabilities.

GPU Role

The NVIDIA GeForce RTX 3060 Ti is built on the Ampere architecture with a GA104 chip, fabricated on an 8 nm process. It features 4864 shading units, 152 TMUs, 80 ROPs, 38 RT cores, and 152 tensor cores. The base clock is 1410 MHz, with a boost clock of 1665 MHz, and the memory runs at 1750 MHz (14 Gbps effective) across a 256-bit bus, yielding a bandwidth of 448.0 GB/s. The GPU's pixel rate is 133.2 GPixel/s, texture rate is 253.1 GTexel/s, and FP32 performance is 16.20 TFLOPS. The TDP is 200 W, with a suggested PSU of 550 W.

In Overpower, the GPU's role is evident in the resolution scaling discussed above. The 8 GB VRAM capacity is a plausible constraint at 4K Ultra, where the average FPS is 44.8. The GPU's benchmark scores place it in the 69th percentile of all GPUs, with an average benchmark score of 25120. Its nearest rivals include the AMD Radeon RX 6700M (avgScore 25180, deltaPct -0.2), AMD Radeon RX 6600 (25235, -0.5), AMD Radeon 890M (25246, -0.5), and AMD Radeon RX 580 2048SP (25287, -0.7). The negative deltaPct values indicate the RTX 3060 Ti trails each of these rivals by 0.2%, 0.5%, 0.5%, and 0.7%, respectively. This modest deficit in raw compute aligns with the observed FPS at higher resolutions, where the GPU's fill-rate and memory bandwidth become the deciding factors.

CPU Role

The AMD Ryzen 7 7700X is a Zen 4 (Raphael) processor with 8 cores and 16 threads, base clock of 4.50 GHz, and boost clock of 5.40 GHz. It has a TDP of 105 W, 32 MB of shared L3 cache, and supports DDR5 memory with a dual-channel bus and 83.2 GB/s bandwidth. The CPU's benchmark scores are strong: Cinebench R23 multi-core 30325, single-core 4281; Geekbench multi-core 15538, single-core 2985; Passmark multi-thread 35686, single-thread 4190. Its average benchmark score is 34313, placing it in the 89th percentile of all CPUs.

The CPU's nearest rivals are the Intel Core i5-13500 (avgScore 34175, deltaPct 0.4), Intel Core i7-12800HX (34136, 0.5), Intel Core Ultra 7 165H (34584, -0.8), and AMD EPYC 4244P (34599, -0.8). The positive deltaPct for the i5-13500 and i7-12800HX means the Ryzen 7 7700X is 0.4% and 0.5% ahead of them, respectively, while it trails the Core Ultra 7 165H and EPYC 4244P by 0.8% each. In Overpower, the CPU's high single-thread and multi-thread performance suggests it is not the bottleneck; the FPS scaling with resolution points to the GPU as the limiting factor. The CPU's boost clock of 5.40 GHz and 32 MB L3 cache are well-suited for action games, providing ample headroom for the GPU to operate without CPU-induced frame drops.

Settings Recommendations

The measured FPS rows provide a clear basis for preset selection. At 1080p, all presets exceed 60 FPS: Low 127.6, Medium 79.8, High 73.3, Ultra 63.5. At 1440p, only Ultra falls below 60, at 58.1 FPS, while Low, Medium, and High are 115.3, 74.1, and 66, respectively. At 4K, Low and Medium are above 60 (96.9 and 60.9), while High and Ultra are 56.5 and 44.8.

For a 60 FPS target, the highest preset that maintains the threshold at each resolution is: 1080p Ultra (63.5 FPS), 1440p High (66 FPS), and 4K Medium (60.9 FPS). The data indicates that Medium at 4K is the only preset above 60 at that resolution besides Low, making it the most visually demanding option that still hits the target. At 1440p, High offers a substantial improvement over Medium (66 vs 74.1) while staying above 60, and at 1080p, Ultra is viable. The gap between Low and Ultra is large at all resolutions, but the scaling suggests that the GPU's limits are most pronounced at 4K, where even High cannot reach 60 FPS.

How This Combo Ranks

The combo ranks 1291 out of 1744 tested combinations in Overpower. This places it in the lower portion of the ranking, indicating that many other CPU-GPU pairings achieve higher average FPS. The CPU's high percentile (89) and GPU's moderate percentile (69) do not translate into a top-tier combo rank, suggesting that the game's performance is heavily dependent on the GPU. The RTX 3060 Ti's 8 GB VRAM and 448.0 GB/s bandwidth are likely the limiting factors at higher resolutions, as evidenced by the FPS drop from 1080p to 4K. The rank of 1291 out of 1744 means the combo is better than 453 other combinations, but it is far from the top. The data implies that users seeking higher frame rates in Overpower would benefit more from a stronger GPU than from a faster CPU, given the CPU's already strong benchmark standing.

FAQ

Q: What is the average FPS at 1080p Ultra?

A: 63.5 FPS.

Q: What is the CPU's boost clock?

A: 5.40 GHz.

Q: How much VRAM does the GPU have?

A: 8 GB GDDR6.

Q: What is the combo's rank in Overpower?

A: 1291 out of 1744.

Q: Which preset at 4K is the highest to average above 60 FPS?

A: Medium, with 60.9 FPS.

Q: What is the GPU's average benchmark score?

A: 25120.

Measured FPS Breakdown

| Resolution | Settings | Avg FPS |

|------------|----------|---------|

| 3840x2160 | High | 56.5 |

| 3840x2160 | Low | 96.9 |

| 3840x2160 | Medium | 60.9 |

| 3840x2160 | Ultra | 44.8 |

| 2560x1440 | High | 66 |

| 2560x1440 | Low | 115.3 |

| 2560x1440 | Medium | 74.1 |

| 2560x1440 | Ultra | 58.1 |

| 1920x1080 | High | 73.3 |

| 1920x1080 | Low | 127.6 |

| 1920x1080 | Medium | 79.8 |

| 1920x1080 | Ultra | 63.5 |