Overpower

The AMD Ryzen 7 5700G and AMD Radeon RX 570 combination delivers playable frame rates at 1080p Low settings in Overpower, but the data clearly indicates that the GPU is the primary bottleneck at higher resolutions and quality presets. The combo ranks near the bottom of the tested pool, placing 3556th out of 3713 combinations, which puts it in the bottom 5% of all tested systems. This pairing is best suited for 1080p gaming with reduced graphical fidelity, as the performance scaling across resolutions reveals a system constrained by the graphics card rather than the processor.

Resolution Scaling

The measured FPS data shows a predictable but steep drop as resolution increases. At 1080p Low settings, the combo achieves an average of 62 FPS, which is the only configuration in the entire dataset that crosses the 60 FPS threshold. Moving to 1440p Low drops the average to 55 FPS, a reduction of 7 FPS or approximately 11%. At 4K Low, the average falls further to 47 FPS, representing a 24% decrease from the 1080p Low result. This scaling pattern suggests that the GPU is being pushed harder at higher resolutions, but the CPU still has enough headroom to feed the graphics card at these lower settings.

The situation becomes more pronounced when examining quality presets. At 1080p Medium, the average FPS drops to 39, which is 23 FPS lower than the Low preset at the same resolution. The 1440p Medium result is 35 FPS, and 4K Medium falls to 29 FPS. The gap between Low and Medium settings at each resolution is substantial, indicating that the additional shading and texture work required by Medium settings significantly impacts the RX 570's limited processing power. At Ultra settings, the combo struggles to maintain playable frame rates, with 30 FPS at 1080p, 27 FPS at 1440p, and just 23 FPS at 4K.

The resolution scaling data reveals that this system is firmly GPU-limited. The Ryzen 7 570G's 8-core, 16-thread configuration provides ample processing power, but the RX 570's 4GB of VRAM and 2048 shading units cannot keep up with the demands of higher resolutions. The fact that 1080p Low is the only playable configuration, while 4K Ultra produces just 23 FPS, demonstrates that the graphics card is the limiting component in every scenario tested. The CPU's performance headroom is evident in the relatively small FPS differences between resolutions at the same settings, which points to the GPU being the primary constraint.

FAQ

*Q: What is the best settings configuration for this combo in Overpower?*

A: The data shows that 1080p Low settings produce the highest average FPS at 62, which is the only configuration that exceeds 60 FPS. 1080p Medium drops to 39 FPS, and 1080p High falls to 36 FPS, making Low the only preset that provides a consistently smooth experience.

Q: How does the combo perform at 4K resolution?

A: At 4K, the system averages 47 FPS on Low settings, 29 FPS on Medium, 27 FPS on High, and 23 FPS on Ultra. These results indicate that 4K gaming is not viable for this pairing, as even the Low preset fails to maintain a stable 60 FPS.

Q: Is the CPU or GPU the bottleneck in this system?

A: The benchmark results indicate the GPU is the limiting factor. The Ryzen 7 5700G has 8 cores and 16 threads with a boost clock of 4.60 GHz, while the RX 570 has a 4GB VRAM capacity and a boost clock of 1244 MHz. The FPS scaling across resolutions and settings follows the GPU's performance envelope, not the CPU's capabilities.

Q: What is the frame time consistency like at 1440p Medium?

A: The 1440p Medium preset shows a minimum FPS of 29 and a maximum of 40, with an average of 35. This 11 FPS variance indicates noticeable frame pacing issues, which could result in stuttering during intense action sequences.

Q: How does this combo rank compared to other tested systems?

A: The combo ranks 3556th out of 3713 tested combinations, placing it in the bottom 4.2% of all systems. This low ranking reflects the GPU's age and limited memory capacity, as the RX 570 was released in 2017 and is now end-of-life.

Q: Can the system handle High settings at any resolution?

A: The data shows High settings produce 36 FPS at 1080p, 32 FPS at 1440p, and 27 FPS at 4K. None of these configurations reach 60 FPS, so High settings are only suitable for players who prioritize visual quality over frame rate.

CPU Role

The AMD Ryzen 7 5700G serves as a capable foundation for this build, though its performance is largely untapped in Overpower due to the GPU bottleneck. This processor features 8 cores and 16 threads based on the Zen 3 architecture, manufactured on TSMC's 7 nm process node. The base clock of 3.80 GHz and boost clock of 4.60 GHz provide solid single-threaded performance, which is reflected in its benchmark scores. The CPU achieves a 3DMark single-thread score of 899 and a multi-thread score of 6627, while Cinebench R23 results show 1494 points for single-core and 12830.5 for multi-core.

The processor's synthetic benchmark scores place it in the 79th percentile of all CPUs, with an average benchmark score of 27051. This puts it in close competition with the Intel Core i9-9900K, which scores 27097 and is only 0.2% ahead. The AMD Ryzen AI 7 445 scores 26936, placing it 0.4% behind, while the Intel Core i5-14400T scores 27166, putting it 0.4% ahead. These results demonstrate that the 5700G holds its own against newer and older rivals in general computing tasks.

In Overpower, the CPU's 16 threads are more than sufficient for the game's demands, as evidenced by the FPS scaling patterns. The fact that performance drops significantly when moving from Low to Medium settings, but less so when moving between resolutions, suggests that the game's rendering workload is primarily GPU-bound. The CPU's 16 MB of L3 cache and dual-channel DDR4 memory support provide adequate bandwidth for feeding the GPU, but the RX 570's 224.0 GB/s memory bandwidth becomes the limiting factor at higher resolutions.

The 5700G's integrated Radeon Vega 8 graphics are irrelevant in this configuration since the discrete RX 570 handles all rendering duties. The CPU's 65W TDP and unlocked multiplier make it an efficient and overclockable option, though the data does not include overclocked results. Overall, the CPU role in this combo is to provide stable frame delivery without bottlenecking the GPU, which it achieves at 1080p Low but becomes increasingly irrelevant as the GPU struggles at higher settings.

How This Combo Ranks

The combo's ranking of 3556th out of 3713 tested combinations places it in the bottom 4.2% of all systems evaluated in Overpower. This low ranking is primarily attributable to the RX 570's age and limited specifications, as the GPU was released in 2017 and has since been discontinued. The RX 570's 4GB of GDDR5 memory on a 256-bit bus provides 224.0 GB/s bandwidth, which is insufficient for modern games at higher resolutions and quality settings.

The GPU's synthetic benchmarks show it in the 74th percentile of all GPUs, with an average benchmark score of 28766. Its nearest rival, the AMD Radeon RX 6800M, scores 28874, which is 0.4% higher. The AMD Radeon R9 M295X scores 28580, placing it 0.7% lower, while the AMD Radeon RX 470 scores 28996, which is 0.8% higher. These results show that the RX 570 sits in a competitive position among older GPUs but struggles against more modern offerings.

The CPU's strong performance does little to improve the overall ranking because the game is clearly GPU-limited. The Ryzen 7 5700G's 79th percentile ranking among CPUs contrasts sharply with the combo's bottom-tier placement, highlighting the imbalance between the two components. This pairing represents a classic bottleneck scenario where the processor's capabilities far exceed what the graphics card can utilize.

Compared to other tested combos, this system falls into the lowest performance tier for Overpower. The 23 FPS at 4K Ultra and 30 FPS at 1080p Ultra demonstrate that the system cannot handle maximum settings at any resolution. The only configuration that approaches smooth gameplay is 1080p Low at 62 FPS, which is a significant compromise for a system with an 8-core CPU.

GPU Role

The AMD Radeon RX 570 is unequivocally the limiting component in this system. This GPU is built on the Polaris 20 chip using GCN 4.0 architecture, manufactured on GlobalFoundries' 14 nm process. The 5,700 million transistors on a 232 mm² die give it a transistor density of 24.6M per mm². The GPU operates at a base clock of 1168 MHz and a boost clock of 1244 MHz, with memory running at 1750 MHz (7 Gbps effective).

The RX 570's 4GB of GDDR5 memory on a 256-bit bus provides 224.0 GB/s of bandwidth, which is a critical limitation in Overpower. At 1080p Low, the system achieves 62 FPS, but increasing the quality preset to Medium drops the frame rate to 39 FPS. This 23 FPS reduction when moving from Low to Medium at the same resolution indicates that the GPU's shading units and texture mapping units are overwhelmed by the additional work required at higher settings.

The GPU's 2048 shading units, 128 texture mapping units, and 32 render output units deliver a pixel rate of 39.81 GPixel/s and a texture rate of 159.2 GTexel/s. The FP32 performance of 5.095 TFLOPS is modest by modern standards but was competitive in 2017 when the GPU launched with an MSRP of 169 USD. The GPU's 150W TDP and dual-slot design make it a straightforward installation, though the 450W suggested PSU requirement should be respected.

In terms of API support, the RX 570 supports DirectX 12 (12_0), OpenGL 4.6, and Vulkan 1.3, which are sufficient for Overpower's requirements. The GPU's percentile ranking of 74th among all GPUs places it above the median, but its nearest rivals show how close the competition is. The performance gap between the RX 570 and the RX 6800M is only 0.4%, demonstrating that the GPU's age is the primary factor in its limited performance.

The GPU's 4GB VRAM capacity is a significant constraint at higher resolutions. At 4K Ultra, the system produces just 23 FPS, which suggests the GPU is running out of memory and resorting to slower memory access patterns. The 1080p Medium minimum FPS of 33 and maximum of 45 shows a 12 FPS variance, indicating that the GPU's memory bandwidth becomes a bottleneck even at moderate settings.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of the combo's performance across three resolutions and four quality settings. At 1080p, the system delivers 62 FPS on Low, 39 FPS on Medium, 36 FPS on High, and 30 FPS on Ultra. The Medium preset shows a minimum FPS of 33 and maximum of 45, giving a 12 FPS variance. This is the only resolution where any preset approaches playable frame rates, with Low being the sole configuration that exceeds 60 FPS.

At 1440p, performance drops across all settings. The Low preset averages 55 FPS, which is a 7 FPS decrease from 1080p Low. Medium averages 35 FPS with a minimum of 29 and maximum of 40, while High averages 32 FPS and Ultra averages 27 FPS. The 1440p Medium variance of 11 FPS (from 29 to 40) indicates inconsistent frame pacing that could be noticeable during gameplay.

The 4K results show the system's limitations most clearly. Low settings average 47 FPS, which is a 15 FPS drop from 1080p Low. Medium averages 29 FPS with a minimum of 25 and maximum of 34, while High averages 27 FPS and Ultra averages 23 FPS. The 4K Medium variance of 9 FPS is the smallest of all Medium presets, but the absolute frame rates are too low for smooth gameplay.

Across all resolutions, the FPS drop from Low to Medium is consistent at approximately 23 FPS at 1080p, 20 FPS at 1440p, and 18 FPS at 4K. This diminishing gap at higher resolutions suggests that the GPU is already saturated at 4K Low, so additional quality settings have less relative impact. The data shows that this combo is only viable for 1080p Low gaming, with all other configurations falling below 60 FPS and most falling below 40 FPS. The 23 FPS at 4K Ultra represents the worst-case scenario, while 62 FPS at 1080p Low is the best-case scenario, and the system's ranking of 3556th out of 3713 reflects this limited performance envelope.