Overpower

The AMD Ryzen 5 9600X paired with the NVIDIA GeForce RTX 4070 SUPER delivers a consistently strong performance profile in Overpower, with the data showing a system capable of high refresh rate gaming at 1440p and respectable 4K results. The measured frame rates across the three resolutions reveal a predictable scaling pattern that highlights the balance between the CPU's single-thread strength and the GPU's raw throughput. This combination proves particularly effective at 1080p and 1440p, where the 6-core processor keeps pace with the graphics card's output, while the 4K results show the expected shift in bottleneck toward the GPU. Benchmark results indicate a setup that favors high-frame-rate competitive play without sacrificing visual fidelity at lower resolutions.

Resolution Scaling

The FPS drop from 1080p to 4K tells a clear story about where the workload lands. At Low settings, the system delivers 234.3 FPS at 1920x1080, which falls to 210.5 FPS at 2560x1440 (a 23.8 FPS reduction), and then drops more sharply to 180.4 FPS at 3840x2160. That final step from 1440p to 4K costs 30.1 FPS, showing the GPU beginning to feel the pixel count. The pattern is more pronounced at higher settings. With Ultra settings, the 1080p result of 110.5 FPS scales to 100.7 FPS at 1440p and then 86.9 FPS at 4K. The 4K-to-1080p ratio at Ultra is roughly 21% lower, while at Low settings it is about 23% lower, suggesting the RTX 4070 SUPER's 12 GB frame buffer and 504.2 GB/s bandwidth become the limiting factor as resolution climbs.

The scaling curve indicates that Overpower is not heavily CPU-bound at 1080p, as the frame rate increase from 1440p to 1080p at Low settings is only 23.8 FPS. If the Ryzen 5 9600X were the primary constraint, that gap would be larger. Instead, the data points to a GPU-limited scenario at 4K, particularly at High and Ultra presets, where the average FPS hovers near the 100 FPS mark. At 1440p, the system hits a sweet spot: 123.6 FPS at High and 100.7 FPS at Ultra, both well above the 60 FPS threshold for smooth gameplay. The 1080p numbers are exceptional for esports-style play, with 234.3 FPS at Low giving ample headroom for high-refresh monitors.

GPU Role

The RTX 4070 SUPER is built on the Ada Lovelace architecture with a boost clock of 2475 MHz and a base clock of 1980 MHz. Its 12 GB of GDDR6X memory on a 192-bit bus provides 504.2 GB/s of bandwidth, which proves sufficient for 4K Ultra where the card delivers 86.9 FPS. The data shows the GPU's 7168 shading units and 224 texture mapping units are well utilized at higher resolutions. The memory clock runs at 1313 MHz, translating to 21 Gbps effective, and this bandwidth becomes the deciding factor when moving from 1440p to 4K. At 4K Low, the card achieves 180.4 FPS, but at 4K Ultra that figure drops to 86.9 FPS, a 93.5 FPS swing that reflects the increased memory pressure and shader workload.

The GPU's percentile ranking of 84 places it above 84% of all tested graphics cards, with its average benchmark score of 42576 sitting close to the NVIDIA RTX A6000, which scores 42653 (a 0.2% difference). This parity in synthetic benchmarks translates to real-world Overpower performance that keeps pace with professional-grade hardware. The card's 220 W TDP and 550 W suggested PSU are modest for its output level, and its dual-slot design with a single 16-pin power connector makes installation straightforward. The FP32 throughput of 35.48 TFLOPS is the same as FP16, indicating the card handles compute-heavy scenes without throttling, which is relevant for Overpower's particle effects and physics calculations.

CPU Role

The Ryzen 5 9600X is a 6-core, 12-thread processor from the 9000 series, built on the Zen 5 architecture (Granite Ridge) using TSMC's 4 nm process. Its base clock of 3.90 GHz and boost clock of 5.40 GHz provide excellent single-thread performance, which is crucial for Overpower's game logic and draw call processing. The CPU's 32 MB of shared L3 cache (1 MB L2 per core) helps keep frequently accessed data close to the cores, reducing latency in fast-paced action sequences. In single-threaded benchmarks, the chip scores 1253 in 3DMark single-thread and 3603 in Cinebench R23 single-core, both strong numbers that correlate with the high frame rates seen at 1080p.

The CPU's benchmark data shows a 85th percentile ranking among all CPUs, with an average benchmark score of 28246. Its nearest rival, the Intel Core i5-13490F, scores 28173, a 0.3% difference, while the AMD Ryzen 7 8845HS is 0.4% behind. This tight grouping indicates the 9600X is competitive with mid-range and some higher-tier chips. The processor's 65 W TDP is notably low, allowing sustained boost clocks without thermal throttling, which is evident in the consistent FPS numbers across resolutions. The 3DMark 16-thread score of 7585 and max-thread score of 7590 show the 12 threads are utilized effectively, though Overpower likely does not need all of them at lower resolutions given the GPU bottleneck observed at 1080p.

How This Combo Ranks

In the database of tested hardware combinations for Overpower, this pairing sits at rank 268 out of 1744 total combos. That places it in the top 15.4% of all tested systems, a strong showing for a mid-range CPU paired with an upper-mid-range GPU. The rank reflects the balanced nature of the setup: the Ryzen 5 9600X avoids bottlenecking the RTX 4070 SUPER at most settings, while the GPU provides enough bandwidth to push high frame rates. The combination outperforms many systems with more expensive CPUs but weaker GPUs, as the 1440p Ultra result of 100.7 FPS demonstrates.

The data shows this combo is better suited for high-refresh 1080p and 1440p gaming than for 4K Ultra, where the 86.9 FPS average is playable but not exceptional. Compared to combos with the RTX 4070 SUPER paired with higher-core-count CPUs, this setup loses ground only in CPU-bound scenarios, which are rare in Overpower based on the resolution scaling data. The 268th rank out of 1744 suggests that roughly 15% of tested combos deliver higher frame rates, typically featuring more powerful GPUs or CPUs with higher multithreaded scores. However, the 9600X's strong single-core performance (4570 in Passmark single-thread) helps it punch above its modest core count.

FAQ

Q: Can this combo handle 4K gaming in Overpower?

A: Yes, at Medium settings it hits 113 FPS, and at High settings it averages 103.8 FPS. At Ultra, frame rates drop to 86.9 FPS, which is still playable but shows the GPU becoming the limiting factor.

Q: What is the best resolution for this setup?

A: The 2560x1440 results offer the best balance, with 133.9 FPS at Medium and 123.6 FPS at High. These numbers provide smooth gameplay while maintaining visual quality above the 1080p baseline.

Q: How does the Ryzen 5 9600X compare to its closest rivals?

A: The CPU's average benchmark score of 28246 is 0.3% higher than the Intel Core i5-13490F (28173) and 0.3% higher than the AMD Ryzen 5 230 (28164). It trails the AMD Ryzen 7 8845HS by 0.4% (28369) and the Intel Core i5-14500T by 0.5% (28377).

Q: Is the RTX 4070 SUPER's 12 GB VRAM sufficient for Overpower?

A: The data shows the 12 GB GDDR6X memory with 504.2 GB/s bandwidth is adequate, as the 4K Ultra preset averages 86.9 FPS without indicating a memory-related performance cliff.

Q: What settings should I use for competitive play?

A: At 1080p Low settings, the system achieves 234.3 FPS, and at 1440p Low it reaches 210.5 FPS. These settings minimize GPU load and maximize frame rates for fast-paced action.

Q: How does this combo rank among all tested systems?

A: It ranks 268th out of 1744 tested combinations, placing it in the top 15.4% of all systems benchmarked for Overpower.

Measured FPS Breakdown

At 1920x1080, the system delivers its highest frame rates. Low settings produce 234.3 FPS, Medium drops to 145.1 FPS, High yields 136.8 FPS, and Ultra settles at 110.5 FPS. The step from Low to Medium is the largest single jump at 89.2 FPS, indicating that texture and shadow quality settings have a significant impact at this resolution. The gap between Medium and High is only 8.3 FPS, while High to Ultra costs 26.3 FPS, suggesting the Ultra preset introduces effects that disproportionately affect performance.

Moving to 2560x1440, the numbers show a similar pattern with a lower ceiling. Low settings average 210.5 FPS, Medium hits 133.9 FPS, High reaches 123.6 FPS, and Ultra produces 100.7 FPS. The 1440p results are all above 100 FPS, making this resolution the practical ceiling for high-refresh monitors. The resolution jump from 1080p costs between 23.8 FPS (Low) and 9.8 FPS (Ultra), with the smaller absolute drop at Ultra indicating the GPU is already near its limit.

At 3840x2160, the system remains playable but shows clear signs of GPU constraint. Low settings average 180.4 FPS, which is still competitive, but Medium drops to 113 FPS, High falls to 103.8 FPS, and Ultra bottoms out at 86.9 FPS. The 4K results show a 93.5 FPS difference between Low and Ultra, the widest spread across all resolutions. This data suggests that for 4K gaming, users should stick to High settings or below to maintain frame rates above 100 FPS, while Ultra is reserved for slower-paced gameplay where 86.9 FPS is acceptable.