Overpower

# Overpower with AMD Ryzen 5 5600GT + NVIDIA GeForce RTX 4070

The AMD Ryzen 5 5600GT paired with the NVIDIA GeForce RTX 4070 delivers a compelling 1080p and 1440p experience in Overpower, with the data showing this combo ranking in the 77th percentile overall (rank 855 out of 3713 tested combinations). The measured frame rates reveal a system that excels at lower resolutions but begins to show its limitations as pixel count climbs, with the 6-core Zen 3 processor and the 12GB Ada Lovelace GPU each taking turns as the bottleneck depending on the settings and resolution chosen.

Resolution Scaling

The measured FPS data across the three resolutions tells a clear story about how this combo scales in Overpower. At 1080p with Low settings, the system produces 212 FPS average. Moving to 1440p Low drops that to 189 FPS, a reduction of 23 FPS or roughly 11%. Pushing further to 4K Low yields 160 FPS, another 29 FPS drop from 1440p. This scaling pattern is relatively mild, suggesting that at Low settings the frame rate is still largely CPU-bound at 1080p, with the GPU taking over more responsibility as resolution increases.

The Medium preset shows a similar but slightly steeper curve. From 1080p Medium at 132 FPS, the system falls to 118 FPS at 1440p (a 14 FPS drop) and then to 100 FPS at 4K (an 18 FPS drop). The High preset follows the same trajectory: 123 FPS at 1080p, 109 FPS at 1440p, and 93 FPS at 4K. Ultra settings compress the range further, going from 102 FPS at 1080p to 91 FPS at 1440p and finally 77 FPS at 4K.

What's notable is that the percentage drop from 1080p to 4K widens as settings increase. At Low, the 4K figure is 75.5% of the 1080p figure. At Medium, that ratio drops to 75.8%. At High, it's 75.6%. Ultra shows the tightest scaling relative to its starting point, with 4K Ultra at 77 FPS representing 75.5% of the 1080p Ultra score of 102 FPS. This consistency suggests that neither component is dramatically dominating the bottleneck at any resolution — instead, the scaling is relatively even, which points to a balanced pairing where the GPU's rendering load and the CPU's frame-feeding capability are reasonably matched.

The min FPS data, available only for Medium settings, adds another dimension. At 1080p Medium the minimum is 112 FPS, while at 1440p it's 100 FPS and at 4K it's 85 FPS. The gap between average and minimum FPS also grows slightly with resolution: 20 FPS at 1080p, 18 FPS at 1440p, and 15 FPS at 4K. This narrowing variance at higher resolutions indicates that frame pacing becomes more consistent as the GPU becomes more heavily loaded, reducing the likelihood of CPU-related hitches.

Settings Recommendations

Given the measured rows, the Medium preset emerges as the sweet spot for this combination across all three resolutions. At 1080p Medium, the system delivers 132 FPS average with a minimum of 112 FPS, which represents a 29 FPS improvement over High settings while only sacrificing a modest amount of visual fidelity. The 1440p Medium figure of 118 FPS average with 100 FPS minimum remains comfortably above the 90 FPS threshold that many action games benefit from. Even at 4K, Medium produces 100 FPS average with an 85 FPS minimum, making it the only preset that stays above 60 FPS at the highest resolution.

For players prioritizing maximum frame rates, Low settings at 1080p delivers 212 FPS, which drops to 189 FPS at 1440p and 160 FPS at 4K. These numbers suggest that competitive play could readily use Low at any resolution, but the jump from Low to Medium costs roughly 38% of the frame rate at each resolution — a significant trade-off that may not be worth it for esports-focused users.

High settings represent the balanced visual upgrade path, with 123 FPS at 1080p, 109 FPS at 1440p, and 93 FPS at 4K. The difference between High and Medium is only 9-11 FPS across all resolutions, which makes Medium the more sensible choice for those seeking higher frame rates without substantial visual compromise. Ultra settings, however, exact a heavier toll: at 4K, Ultra drops to 77 FPS, which represents a 23 FPS penalty compared to Medium. The data indicates that Ultra is best reserved for 1080p displays, where 102 FPS remains playable, while Medium or High are preferable at higher resolutions.

FAQ

Q: What frame rate can I expect at 4K with this combo in Overpower?

A: The measured data shows 160 FPS at Low, 100 FPS at Medium, 93 FPS at High, and 77 FPS at Ultra for 3840x2160 resolution. The Medium preset provides the best balance with a 100 FPS average and an 85 FPS minimum.

Q: Is the RTX 4070's 12GB VRAM sufficient for Overpower?

A: The 12GB GDDR6X memory with 504.2 GB/s bandwidth demonstrates adequate capacity across all tested settings and resolutions. The highest measured frame rate at 4K Ultra is 77 FPS, with no indication of memory-related performance degradation in the data.

Q: How does the Ryzen 5 5600GT compare to its nearest CPU rivals?

A: The 5600GT has an average benchmark score of 20733, which places it 0.3% below the Intel Core i5-12490F (20802) and 0.4% below the Intel Xeon 6325P (20821). It also trails the Intel Core Ultra 5 125U (20826) by 0.4% and the AMD EPYC 7J13 (20845) by 0.5%.

Q: What is the best resolution for this combo in Overpower?

A: The data suggests 1440p as the optimal resolution. At Medium settings, the system produces 118 FPS average with a 100 FPS minimum, while 4K Medium drops to 100 FPS average. The 1440p figures offer a better balance of visual clarity and frame rate headroom.

Q: How does the GPU's benchmark score position it against rivals?

A: The RTX 4070 scores 37648 on average, ranking in the 81st percentile of all GPUs. It is 0.1% ahead of the NVIDIA Tesla P4 (37628) and 0.4% ahead of the AMD Radeon RX Vega 56 (37507), while trailing the RTX 4080 Mobile (38135) by 1.3% and leading the AMD Radeon PRO W6400 (37157) by 1.3%.

Q: Does the CPU bottleneck the GPU at any resolution?

A: The scaling data suggests a balanced pairing. The 23 FPS drop from 1080p Low (212 FPS) to 1440p Low (189 FPS) and the further 29 FPS drop to 4K Low (160 FPS) indicate that the GPU becomes the limiting factor only at higher resolutions, while the CPU maintains high frame delivery at 1080p.

How This Combo Ranks

This specific combination of AMD Ryzen 5 5600GT and NVIDIA GeForce RTX 4070 achieves rank 855 out of 3713 tested combos in Overpower, placing it in the top 23% of all configurations. The percentile ranking of the individual components helps contextualize this result: the CPU sits in the 74th percentile of all CPUs, while the GPU ranks in the 81st percentile of all GPUs. The combo's overall position at roughly the 77th percentile (855/3713) suggests that the pairing performs slightly below what the GPU's individual ranking might imply, hinting at a mild CPU limitation in certain scenarios.

The measured FPS data supports this interpretation. At 1080p Low, the 212 FPS figure indicates the CPU is still capable of feeding frames at a high rate, but the fact that this only reaches the 77th percentile of combos suggests that other pairings with stronger CPUs achieve higher frame rates in CPU-bound scenarios. The gap between this combo's ranking and the top configurations likely stems from the 5600GT's 6-core, 12-thread configuration with a 3.60 GHz base clock and 4.60 GHz boost clock, which, while competitive, does not match the multi-core throughput of higher-tier processors in the benchmark database.

The GPU's 81st percentile ranking versus the combo's 77th percentile position indicates that the RTX 4070 is the stronger component in this pairing. This is consistent with the resolution scaling data, where the frame rate drops at 4K are proportionally similar across settings — a pattern that would occur if the GPU is becoming the primary bottleneck at higher resolutions, while the CPU keeps pace adequately at lower resolutions.

GPU Role

The NVIDIA GeForce RTX 4070 brings substantial rendering capability to this pairing, built on the AD104 chip with Ada Lovelace architecture manufactured on a 5 nm process at TSMC. The GPU contains 35,800 million transistors across a 294 mm² die, with 5888 shading units, 184 texture mapping units, and 64 render output units. Its clock speeds start at 1920 MHz base and boost to 2475 MHz, while memory runs at 1313 MHz (21 Gbps effective) across a 192-bit bus.

The 12GB GDDR6X memory with 504.2 GB/s bandwidth proves adequate for Overpower's demands, as evidenced by the consistent frame rates across all tested settings. The pixel rate of 158.4 GPixel/s and texture rate of 455.4 GTexel/s provide the raw throughput needed to sustain the 4K Ultra result of 77 FPS. More revealing is the GPU's computed performance of 29.15 TFLOPS FP32 and FP16 (1:1), which indicates strong compute capability that scales with resolution increases.

The GPU's benchmark profile shows particular strength in DirectX 11 (244 in Passmark) compared to DirectX 12 (103) and DirectX 10 (139). This suggests Overpower's engine may favor the GPU's DX11 path, which could explain why the measured frame rates at 4K remain relatively high even at Ultra settings. The Geekbench OpenCL score of 154858 and Vulkan score of 174152 further demonstrate the GPU's compute versatility, though the game's specific API usage would determine which of these strengths is most relevant.

The 200W TDP with a suggested 550W PSU indicates the GPU's power requirements are moderate, though this analysis focuses purely on performance metrics. The dual-slot cooler and 240mm length make it physically compatible with most mid-tower cases, and the PCIe 4.0 x16 interface provides ample bandwidth for the 12GB frame buffer.

Measured FPS Breakdown

At 1920x1080, the data shows a clear progression across settings. Low settings produce 212 FPS average, Medium delivers 132 FPS with a minimum of 112 FPS and maximum of 152 FPS, High reaches 123 FPS, and Ultra drops to 102 FPS. The 80 FPS spread between Low and Ultra at 1080p demonstrates that the CPU can drive high frame rates when the GPU workload is light, but the GPU's rendering limits become apparent as settings increase.

Moving to 2560x1440, the frame rates compress somewhat. Low produces 189 FPS, Medium averages 118 FPS with a 100 FPS minimum and 135 FPS maximum, High achieves 109 FPS, and Ultra falls to 91 FPS. The 98 FPS gap between Low and Ultra at 1440p is actually larger than at 1080p, suggesting that the GPU's workload scaling is steeper at this resolution, making settings choice more impactful.

At 3840x2160, the 4K results show the system's limits. Low still manages 160 FPS, but Medium drops to 100 FPS with an 85 FPS minimum and 115 FPS maximum, High reaches 93 FPS, and Ultra bottoms out at 77 FPS. The 83 FPS difference between Low and Ultra at 4K indicates that even the RTX 4070's substantial compute resources are strained by the pixel count, though all settings remain above 60 FPS. The minimum FPS data at Medium settings across resolutions — 112 FPS at 1080p, 100 FPS at 1440p, and 85 FPS at 4K — shows that frame pacing remains consistent even as average frame rates decline.

CPU Role

The AMD Ryzen 5 5600GT is a 6-core, 12-thread processor based on Zen 3 architecture (codename Cezanne), manufactured on TSMC's 7 nm process with 10,700 million transistors on a 180 mm² die. Its base clock of 3.60 GHz boosts to 4.60 GHz, with 16 MB of L3 cache and 512 KB L2 per core. The CPU supports DDR4 memory with dual-channel configuration and 51.2 GB/s bandwidth, which is modest but adequate for gaming workloads.

In Overpower, the CPU's role is most evident at 1080p Low settings, where the 212 FPS result approaches the limits of what this processor can feed to the GPU. The Cinebench R23 multicore score of 17272 and single-core score of 2438 provide context: the single-core performance is competitive for gaming, while the multicore throughput supports the 12-thread workload that modern action games can leverage. The 3DMark results show scaling from 913 (single-thread) to 5554 (max-threads), indicating that the CPU's 12 threads are effectively utilized in multi-threaded scenarios.

The CPU's 74th percentile ranking among all CPUs, with an average benchmark score of 20733, places it just below the Intel Core i5-12490F (20802, -0.3%) and Intel Xeon 6325P (20821, -0.4%). These near-identical scores suggest that in CPU-bound scenarios, the 5600GT performs essentially on par with these rivals. The Passmark multithread score of 20325 and single-thread score of 3348 further confirm that this CPU provides balanced performance across both lightly-threaded and heavily-threaded workloads.

The 65W TDP and AMD Socket AM4 compatibility make this an accessible processor, though the PCIe Gen 3 interface (16 lanes) could theoretically limit GPU bandwidth compared to newer platforms. However, the measured FPS data does not show signs of PCIe bandwidth constraints, as the GPU's performance at 4K scales consistently with settings. The integrated Radeon Vega 7 graphics are present but not relevant to this discrete GPU pairing, and the unlocked multiplier allows for overclocking headroom that could improve CPU-bound frame rates at 1080p.