Outriders
This combination delivers exceptional performance with an average of 161 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 53 | 73 | 99 | 137 |
| 1440p QHD | 102 | 143 | 187 | 238 |
| 1080p Full HD | 164 | 220 | 245 | 275 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Outriders with Intel Core i7-14700K + NVIDIA GeForce RTX 5070 Ti, In-Depth Analysis
The Intel Core i7-14700K paired with the NVIDIA GeForce RTX 5070 Ti produces a wide spread of frame rates in Outriders, depending on where the resolution and settings sliders land. At 1080p with Low settings, the combo reaches 275 FPS, while at 4K Ultra it drops to 52.5 FPS. This range suggests a system that can easily chase high-refresh monitors at lower resolutions but will face a heavier graphics load as pixel count climbs. The measured data places this pairing at rank 55 out of 1693 tested combos, putting it in the top tier of configurations for this game.
Resolution Scaling
The frame rate drop from 1080p to 4K reveals a clear shift in what limits performance. At 1920x1080 with High settings, the average is 220 FPS. Move to 2560x1440 High, and the average falls to 142.9 FPS, a reduction of roughly 35%. At 3840x2160 High, the average lands at 73.4 FPS, which is about 67% lower than the 1080p High result. This pattern is consistent with a GPU-bound workload at higher resolutions — the CPU has enough headroom at 1080p to push very high frame counts, but the RTX 5070 Ti’s rendering load becomes the dominant factor as resolution increases.
Looking at the Low settings rows tells a similar story. At 1080p Low, the average is 275 FPS, which is the highest measured value in the entire dataset. At 1440p Low, it drops to 238.3 FPS, and at 4K Low it falls to 136.6 FPS. The fact that 4K Low still produces 136.6 FPS suggests the GPU has substantial raw throughput, but the scaling from 1080p to 4K is far from linear — the 4K Low result is only about half of the 1080p Low result. This indicates that even at Low settings, the pixel fill rate and memory bandwidth of the GPU are being stretched at 4K.
The Ultra preset shows the steepest decline. Starting at 164.4 FPS in 1080p, dropping to 102.3 FPS at 1440p, and then collapsing to 52.5 FPS at 4K. The 4K Ultra result is the lowest in the entire dataset, and it is less than one-third of the 1080p Ultra score. This suggests that the combination of high resolution and Ultra settings creates a scenario where the GPU is heavily saturated, and any further increase in visual complexity would likely push the frame rate below 50 FPS.
The data implies that at 1080p, the CPU is managing to keep the GPU well-fed, but the gap between Low and Ultra at that resolution — 275 FPS versus 164.4 FPS — still shows a meaningful GPU impact from settings. At 4K, the gap between Low and Ultra is even more pronounced: 136.6 FPS versus 52.5 FPS. This widening gap with resolution is a classic sign that the graphics card becomes the limiting component as resolution rises, while the CPU’s role diminishes.
FAQ
Q: What is the highest average FPS measured for this combo?
A: The highest average FPS is 275, which occurs at 1920x1080 with Low settings.
Q: How does the 4K Ultra performance compare to 1080p Ultra?
A: The 4K Ultra average is 52.5 FPS, while the 1080p Ultra average is 164.4 FPS. That means 4K Ultra delivers roughly 32% of the 1080p Ultra frame rate.
Q: Is the CPU or GPU more likely to be the bottleneck at 1440p Medium?
A: At 2560x1440 Medium, the average FPS is 186.7. Given that the 1080p Medium result is 245.1 FPS, the drop indicates the GPU is taking on more work at 1440p, making it the more likely limiting factor compared to the CPU.
Q: What is the lowest average FPS recorded in the dataset?
A: The lowest average FPS is 52.5, recorded at 3840x2160 with Ultra settings.
Q: How does the combo rank among all tested configurations for Outriders?
A: The combo ranks 55th out of 1693 tested combos, placing it in the upper percentile of system configurations for this game.
Q: What is the difference between 1080p High and 1440p High average FPS?
A: The 1080p High average is 220 FPS, and the 1440p High average is 142.9 FPS. The difference is 77.1 FPS, representing a 35% reduction.
CPU Role
The Intel Core i7-14700K is a 20-core, 28-thread processor based on the Raptor Lake architecture, with a base clock of 3.40 GHz and a boost clock of 5.60 GHz. It has a 33 MB shared L3 cache and supports both DDR4 and DDR5 memory over a dual-channel bus. The CPU’s benchmark scores reflect strong multi-threaded capability, with a Cinebench R23 multi-core score of 44534 and a single-core score of 6287. Its percentile ranking versus all CPUs is 96, meaning it outperforms the vast majority of processors in general compute workloads.
In Outriders, the CPU’s influence is most visible at lower resolutions. At 1080p Low, the combo hits 275 FPS, which is a very high frame rate that suggests the CPU is able to feed the GPU with enough draw calls and game logic updates. However, the gap between 1080p Low and 1080p Ultra — 275 FPS versus 164.4 FPS — shows that even with a powerful CPU, the GPU settings still have a major impact. At 1440p and 4K, the CPU’s advantage becomes less relevant because the GPU is clearly the bottleneck, as evidenced by the steep FPS declines when resolution increases.
The nearest rivals for this CPU in general benchmarks include the Intel Core i7-14700KF with an average score of 70104 and a deltaPct of 0, meaning they are essentially tied. The AMD EPYC 9115 is 0.3% behind, while the AMD Ryzen 9 9950X is 0.5% ahead. These margins are small, indicating that the i7-14700K is well-positioned among top-tier desktop processors. For a looter shooter like Outriders, where enemy counts and particle effects can strain the CPU, the 20-core configuration provides ample headroom, but the measured FPS data shows that the game’s performance ceiling is more often set by the graphics card, especially at higher resolutions.
How This Combo Ranks
The combo rank for this specific pairing in Outriders is 55 out of 1693 tested combinations. This places it in the top 3.2% of all configurations tested. That is a strong result, but it is not the absolute top, which suggests that there are other CPU and GPU pairings that can achieve higher frame rates in this title. The rank reflects the balance between the i7-14700K’s compute power and the RTX 5070 Ti’s graphics throughput, and the data shows that this balance is effective for Outriders.
What makes this rank notable is that the GPU’s percentile versus all GPUs is 87, while the CPU’s percentile is 96. The CPU is more highly ranked in its category than the GPU, which implies that the graphics card is the slightly weaker link in this pairing. Yet, the combo still achieves a top-55 finish, meaning the CPU’s strong single-thread and multi-thread performance helps carry the system in scenes that are CPU-heavy. For a game like Outriders, which mixes fast-paced combat with dense visual effects, this kind of balance is valuable.
The rank also indicates that while the RTX 5070 Ti is a capable card, it is not the absolute fastest available. Its nearest rival, the NVIDIA GeForce RTX 4080, has an identical average benchmark score of 52085 with a deltaPct of 0, suggesting they perform at the same level in synthetic tests. The AMD Radeon RX 7700S is 0.8% behind, and the AMD Radeon Pro W6600M is 2.5% ahead. This places the RTX 5070 Ti in a competitive but not dominant position, which aligns with its 87th percentile ranking among all GPUs.
Settings Recommendations
The measured FPS rows show that the Ultra preset is demanding, especially at higher resolutions. At 4K Ultra, the average FPS is 52.5, which is playable but not smooth for high-refresh displays. At 1440p Ultra, the average is 102.3 FPS, which is a solid experience for most monitors. At 1080p Ultra, the average jumps to 164.4 FPS, which is excellent for fast-paced gameplay. The data suggests that Ultra settings are best reserved for 1080p or 1440p, where the frame rate remains above 100 FPS.
The High preset offers a better balance for higher resolutions. At 4K High, the average is 73.4 FPS, which is a noticeable improvement over 4K Ultra and still looks visually rich. At 1440p High, the average is 142.9 FPS, which is very smooth, and at 1080p High, it reaches 220 FPS. For users prioritizing visual quality and smoothness, High at 1440p appears to be the sweet spot, delivering a frame rate that exceeds 140 FPS while maintaining a high level of graphical fidelity.
The Medium preset provides a significant boost over High at 4K, with an average of 98.8 FPS. At 1440p Medium, it reaches 186.7 FPS, and at 1080p Medium, it hits 245.1 FPS. This preset is ideal for users who want high frame rates without sacrificing too much visual detail. The Low preset, while offering the highest frame rates — 275 FPS at 1080p, 238.3 FPS at 1440p, and 136.6 FPS at 4K — is best used for competitive play or for users with 240Hz or higher refresh monitors at 1080p or 1440p.
Measured FPS Breakdown
At 1920x1080, the average FPS values are as follows: Low settings produce 275 FPS, Medium settings produce 245.1 FPS, High settings produce 220 FPS, and Ultra settings produce 164.4 FPS. The spread from Low to Ultra is 110.6 FPS, showing that settings have a major impact even at 1080p. The jump from Medium to High is 25.1 FPS, and from High to Ultra is 55.6 FPS, indicating that the Ultra preset carries a heavier performance cost.
At 2560x1440, the average FPS values are: Low at 238.3, Medium at 186.7, High at 142.9, and Ultra at 102.3. The drop from 1080p to 1440p for each setting is consistent, with the Low preset losing about 37 FPS, Medium losing about 58 FPS, High losing about 77 FPS, and Ultra losing about 62 FPS. This shows that the GPU is being taxed more heavily at 1440p, and the gap between Medium and High widens to 43.8 FPS.
At 3840x2160, the average FPS values are: Low at 136.6, Medium at 98.8, High at 73.4, and Ultra at 52.5. The 4K results show the most dramatic scaling, with the Ultra preset falling below 60 FPS. The difference between Low and Medium at 4K is 37.8 FPS, and between Medium and High is 25.4 FPS. The overall trend across all resolutions is that the GPU becomes the limiting factor as resolution increases, and the Ultra preset is the most demanding option in every scenario.
GPU Role
The NVIDIA GeForce RTX 5070 Ti is built on the Blackwell 2.0 architecture with a 5 nm process from TSMC. It has 16 GB of GDDR7 memory on a 256-bit bus, delivering a bandwidth of 896.0 GB/s. The GPU’s base clock is 2295 MHz, with a boost clock of 2452 MHz, and it has 8960 shading units, 280 texture mapping units, and 96 raster output units. It also includes 70 ray tracing cores and 280 tensor cores, supporting DirectX 12 Ultimate and Vulkan 1.4.
In Outriders, the GPU’s role is evident in the frame rate scaling. At 4K Ultra, the combo produces 52.5 FPS, which is the lowest score in the dataset and suggests the GPU is fully saturated. The 16 GB VRAM is sufficient for the game’s textures at all resolutions, but the compute load from Ultra settings at 4K is heavy. The GPU’s benchmark scores, such as a Passmark G3D score of 32974 and a 3DMark Steel Nomad DX12 score of 6604, indicate strong rasterization performance, but the game’s demands at 4K Ultra exceed what this card can deliver at high frame rates.
The GPU’s percentile versus all GPUs is 87, and its nearest rival, the RTX 4080, matches its average benchmark score exactly. This means the RTX 5070 Ti is a high-end card, but not the fastest available. Its memory bandwidth of 896.0 GB/s is substantial, which helps at 4K, but the data shows that even with this bandwidth, the Ultra preset at 4K drops to 52.5 FPS. This suggests that the shading and ray tracing workloads, rather than memory bandwidth, are the primary limits at the highest settings. For users targeting 4K Ultra, the measured results indicate that a more powerful GPU would be needed to maintain frame rates above 60 FPS.
Hardware Specifications
Intel Core i7-14700K
NVIDIA GeForce RTX 5070 Ti
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i7-14700K + NVIDIA GeForce RTX 5070 Ti in Outriders
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 136.6 |
| 3840x2160 | Medium | 98.8 |
| 3840x2160 | High | 73.4 |
| 3840x2160 | Ultra | 52.5 |
| 2560x1440 | Low | 238.3 |
| 2560x1440 | Medium | 186.7 |
| 2560x1440 | High | 142.9 |
| 2560x1440 | Ultra | 102.3 |
| 1920x1080 | Low | 275.0 |
| 1920x1080 | Medium | 245.1 |
| 1920x1080 | High | 220.0 |
| 1920x1080 | Ultra | 164.4 |
Outriders with ii7-14700K + Other GPUs
See how Outriders performs with the same CPU but different graphics cards.
Outriders with RTX 5070 Ti + Other CPUs
See how Outriders performs with the same GPU but different processors.
Other Games with ii7-14700K + RTX 5070 Ti
Explore FPS benchmarks for other games using this same hardware combination.