Outriders

The Intel Core i5-12400F pairs with the NVIDIA GeForce RTX 5070 Ti to form a configuration that places 601st out of 3,710 tested combos in Outriders. This places the pairing comfortably inside the top 20% of all tested systems. The data shows a 6-core, 12-thread processor with a base clock of 2.50 GHz and a boost clock of 4.40 GHz, built on the Alder Lake architecture with an 18 MB shared L3 cache. This mid-range processor, with its 65 W TDP, is matched with a high-end GPU, and the benchmark results indicate that the balance leans heavily toward the graphics card in most scenarios.

CPU Role

The Core i5-12400F provides 6 physical cores and 12 threads, which is sufficient for the looter shooter genre. The processor’s boost clock of 4.40 GHz delivers strong single-thread performance, a critical factor for game logic and physics. In synthetic benchmarks, the CPU achieves a single-thread score of 1,680 in Cinebench R23 and 909 in 3DMark single-thread, while its multi-thread scores reach 12,380 in Cinebench R23 and 5,912 in 3DMark max threads. These figures place the CPU at the 73rd percentile of all processors, indicating solid mid-range performance.

The CPU’s role in Outriders becomes evident when analyzing the frame rate scaling across resolutions. At 1080p Low settings, the average frame rate is 215 FPS, which suggests the CPU can feed the GPU effectively. However, the difference between the 1080p Low score and the 1440p Low score of 185 FPS is only 30 FPS, a 14% drop. Similarly, 1080p High (172 FPS) to 1440p High (140 FPS) shows a 19% reduction. This pattern implies that the CPU is not the primary bottleneck in this configuration; the performance headroom of the 12400F allows the RTX 5070 Ti to operate without significant processor-induced limitations. The nearest rivals to this CPU, such as the AMD Ryzen 5 7535HS, show a 0% performance delta, while the Intel Core 3 201E trails by 0.1%, indicating the 12400F is a well-positioned processor against comparable alternatives.

Settings Recommendations

The measured FPS data provides a clear hierarchy of settings for optimizing the gameplay experience. At 1440p, which is often the target for high-refresh-rate monitors, the High preset delivers an average of 140 FPS. This is a strong result for a demanding game. The Medium preset at 1440p yields 164 FPS, with a minimum of 140 FPS and a maximum of 189 FPS, offering a smoother experience with a 24 FPS improvement over High. However, the Ultra preset at 1440p drops to 101 FPS, a significant 39 FPS reduction from High, which may not justify the visual gains for competitive play.

For 4K gaming, the data suggests that the High preset at 73 FPS provides a playable experience, while Ultra at 53 FPS is borderline for smooth gameplay. The Medium preset at 4K offers 98 FPS, with a minimum of 83 FPS, which is a more comfortable margin above typical 60 FPS thresholds. The recommendation based on the data is to use the Medium preset for 4K to maintain smooth frame rates, while at 1440p, the High preset provides a balanced experience. At 1080p, the Medium preset at 191 FPS offers a good balance, though the Ultra preset at 153 FPS still delivers high performance. The choice between Medium and High at lower resolutions is less critical, as all presets exceed 150 FPS, but the Medium preset’s minimum FPS of 163 at 1080p ensures consistent frame pacing.

Resolution Scaling

The frame rate scaling from 1080p to 4K reveals the GPU-bound nature of this configuration. At Low settings, the average FPS drops from 215 at 1080p to 185 at 1440p (a 14% decrease) and then to 134 at 4K (a 38% decrease from 1440p). This steep decline at 4K indicates that the RTX 5070 Ti is the limiting component as resolution increases. At High settings, the scaling is similar: 172 FPS at 1080p, 140 FPS at 1440p (a 19% drop), and 73 FPS at 4K (a 48% drop from 1440p). The 4K High result shows that the GPU is heavily taxed, with the frame rate nearly halving from the 1440p figure.

The data shows that the CPU’s influence diminishes at higher resolutions. The difference between 1080p and 1440p at Medium settings is 191 FPS to 164 FPS, a 14% reduction, while the drop from 1440p to 4K is 164 FPS to 98 FPS, a 40% reduction. This pattern confirms that the RTX 5070 Ti’s rendering load increases disproportionately with resolution, and the CPU’s 6-core architecture is not the primary constraint. The 4K Ultra result of 53 FPS further emphasizes the GPU’s workload, as the highest settings demand significant graphics processing power, leaving the CPU with ample headroom.

How This Combo Ranks

This specific combination of the Intel Core i5-12400F and the NVIDIA GeForce RTX 5070 Ti achieves a rank of 601 out of 3,710 tested combinations in Outriders. This places the pairing in the 84th percentile of all tested configurations, indicating a high-performing system. The rank reflects the synergy between the CPU and GPU, with the GPU’s strong benchmark scores driving the overall performance. The RTX 5070 Ti holds the 86th percentile among all GPUs, with an average benchmark score of 49,957, and its nearest rival, the AMD Radeon RX Vega 64, shows a 0.1% lower score, indicating the GPU’s competitive position.

The CPU’s percentile of 73 is lower than the GPU’s, suggesting that the processor is not the limiting factor in this combination. The data shows that the combo rank is significantly better than the CPU’s individual rank, which confirms that the GPU’s performance is the dominant contributor to the frame rates observed. In comparison to other combos, this pairing outperforms the vast majority of tested systems, with only 601 configurations achieving a higher rank. This suggests that the combination is well-balanced for Outriders, offering high frame rates across most settings and resolutions, with the only notable weakness being 4K Ultra performance.

GPU Role

The NVIDIA GeForce RTX 5070 Ti is the primary driver of performance in this configuration. The GPU features 16 GB of GDDR7 memory on a 256-bit bus, providing a bandwidth of 896.0 GB/s. Its boost clock of 2452 MHz and base clock of 2295 MHz, combined with 8,960 shading units, deliver substantial compute throughput. The GPU achieves a PassMark G3D score of 32,974 and a 3DMark Steel Nomad DX12 score of 6,604, placing it at the 86th percentile of all GPUs. These specifications translate directly into the high frame rates observed in Outriders.

The GPU’s role is most evident at 4K resolution, where it becomes the clear bottleneck. At 4K Low, the average FPS is 134, which is still very high, but at 4K Ultra, it drops to 53 FPS. The 16 GB VRAM capacity is sufficient for the game’s textures at 4K, as the data does not indicate any memory-related stuttering. The GPU’s memory bandwidth of 896 GB/s supports high-resolution rendering, but the raw compute power is the limiting factor at the highest settings. The GPU’s nearest rivals, such as the AMD Radeon RX 6900 XT, show a 2% higher average score, while the RX 6800 XT trails by 3.1%, confirming the RTX 5070 Ti’s position as a high-end graphics card that excels in this game.

FAQ

Q: What is the best settings preset for 1440p gaming?

A: The High preset at 1440p delivers an average of 140 FPS, while the Medium preset provides 164 FPS with a minimum of 140 FPS. The data suggests that Medium offers a smoother experience, but High is also viable for high-refresh-rate displays.

Q: Can this configuration handle 4K gaming?

A: Yes, the data shows that 4K Medium averages 98 FPS with a minimum of 83 FPS, which is playable. 4K High averages 73 FPS, while 4K Ultra drops to 53 FPS, making Medium the recommended choice for 4K.

Q: How does the CPU compare to its nearest rivals?

A: The Intel Core i5-12400F shows a 0% performance delta compared to the AMD Ryzen 5 7535HS, and it is 0.1% faster than the Intel Core 3 201E. It also leads the Intel Core i5-1335U by 0.3%.

Q: Is the GPU the bottleneck in this system?

A: The data indicates that the GPU becomes the limiting factor at higher resolutions. At 1080p, the frame rates are very high (up to 215 FPS), but at 4K, the frame rate drops significantly, showing the GPU is the primary constraint.

Q: What is the frame rate difference between 1080p and 4K on High settings?

A: At High settings, the average FPS drops from 172 at 1080p to 140 at 1440p and then to 73 at 4K. This represents a 58% decrease from 1080p to 4K.

Q: How does the combo rank compare to other tested systems?

A: This combination ranks 601st out of 3,710 tested combos, placing it in the top 16% of all configurations. This indicates a high-performing system for Outriders.

Measured FPS Breakdown

The measured FPS data for the Intel Core i5-12400F and NVIDIA GeForce RTX 5070 Ti combination in Outriders is as follows:

1080p:

• Low: 215 FPS average
• Medium: 191 FPS average (163 FPS minimum, 220 FPS maximum)
• High: 172 FPS average
• Ultra: 153 FPS average

1440p:

• Low: 185 FPS average
• Medium: 164 FPS average (140 FPS minimum, 189 FPS maximum)
• High: 140 FPS average
• Ultra: 101 FPS average

4K (3840x2160):

• Low: 134 FPS average
• Medium: 98 FPS average (83 FPS minimum, 112 FPS maximum)
• High: 73 FPS average
• Ultra: 53 FPS average

The data shows a consistent pattern across all resolutions: Medium settings provide a significant boost over Low, while High offers diminishing returns, and Ultra incurs a substantial performance penalty. At 1080p, all settings exceed 150 FPS, making the choice less critical. At 1440p, the Medium preset’s minimum of 140 FPS ensures a stable experience. At 4K, the Medium preset is the highest setting that maintains an average above 90 FPS, with High and Ultra dropping to 73 and 53 FPS respectively. The frame time consistency, indicated by the minimum FPS values at Medium settings, shows that the configuration can maintain smooth gameplay even in demanding scenes.