Outriders
This combination provides smooth gameplay with an average of 106 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 32 | 44 | 59 | 81 |
| 1440p QHD | 61 | 84 | 112 | 155 |
| 1080p Full HD | 97 | 134 | 178 | 232 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Outriders with AMD Ryzen 7 7800X3D + NVIDIA GeForce RTX 4060, In-Depth Analysis
AMD Ryzen 7 7800X3D with NVIDIA GeForce RTX 4060 in Outriders: measured frame rates across 1080p, 1440p, and 2160p on Low, Medium, High, and Ultra presets, alongside component benchmarks and game-specific standings. The combination ranks 1,858th out of 3,710 tested systems in this title, placing it just past the midpoint of the measured pool.
Settings Recommendations
The measured rows show that Outriders scales predictably with resolution and preset. At 1920x1080, all four presets produce playable frame rates, with Ultra averaging 97 FPS and Medium reaching 178 FPS. Since the minimum observed at Medium is 152 FPS, even the worst-case dip stays far above the 60 FPS threshold. The Ultra preset remains smooth with a 97 FPS average; there is no reason to drop below Ultra at this resolution unless the user prefers higher frame rates for competitive play, in which case High (134 FPS) or Medium (178 FPS) are also viable.
Moving to 2560x1440, Ultra averages 61 FPS with no reported minimum, while High reaches 84 FPS and Medium 112 FPS. The 61 FPS Ultra figure is marginally above the 60 FPS “playable” bar, but given that the High preset provides 84 FPS, it is a safer choice for maintaining consistent fluidity. For users who want a high-refresh experience, Low yields 155 FPS. A reasonable recommendation for 1440p is High: it delivers the best visual compromise between Ultra and the slower frame rate, and the 84 FPS average leaves headroom to account for intensive scenes. Those who value maximum visual fidelity over a small frame buffer, Ultra at 61 FPS is still playable, but the data suggests High is the better default.
At 3840x2160, only the Medium and Low presets produce an average frame rate at or above 60 FPS. Medium averages 59 FPS (range 50–68) and Low averages 81 FPS. Ultra drops to 32 FPS and High to 44 FPS, both of which are below the 60 FPS mark. For a 4K display, Medium is the recommended preset: it maintains a near-60 FPS average while offering a meaningful visual upgrade over Low, and its minimum of 50 FPS is still relatively close to 60. Low remains the fallback if the user needs an extra margin, but Medium delivers the best trade-off with the data on hand.
Overall, the RTX 4060 can handle Ultra at 1080p and 1440p, while 4K users should stick to Medium for a smooth experience.
How This Combo Ranks
In Outriders, the combination of the Ryzen 7 7800X3D and GeForce RTX 4060 ranks 1,858th out of 3,710 tested combos. That places it just above the median of the dataset (the 50th percentile would be rank ~1,855). It is a mid-pack result for this title, reflecting that the RTX 4060 is a mainstream GPU and the CPU is a high-end part, but the game is not GPU-limited at low resolution and CPU-limited at high resolution. The combo’s ranking shifts relative to the population based on the resolution-specific data; at 4K the heavy GPU load dominates, while at 1080p the CPU’s high single-thread performance becomes more relevant.
The GPU itself holds a 61st percentile rank among all GPUs in the overall benchmark database, with an average benchmark score of 17,639. The closest scoring rivals include the AMD Radeon HD 7790 (17666, -0.2% delta) and the Radeon 780M (17588, +0.3%), indicating the RTX 4060 sits in a tight cluster of uncommon cards. The CPU, meanwhile, ranks in the 83rd percentile with an average score of 33,079, and its near matches are AMD Ryzen 7 8700G and Intel Core i7-13650HX, both with a delta of 0.0%. The combination’s 1,858th rank is roughly expected when pairing a mid-range GPU with a high-end CPU—the result is heavily dependent on the rendering engine’s utilization of both.
The game’s measured FPS list shows a strong scaling from 1080p to 4K, with average FPS dropping by at least 60% in every setting when moving from 1080p to 4K. For instance, Ultra goes from 97 FPS at 1080p to 61 FPS at 1440p to 32 FPS at 4K. That pattern confirms that the RTX 4060’s shader output is the primary limiter in Outriders, which aligns with the combo’s mid-pack ranking.
GPU Role
The NVIDIA GeForce RTX 4060 is based on the AD107 chip, TSMC 5nm process. It has 8GB of GDDR6 memory on a 128-bit bus, providing 272.0 GB/s of bandwidth. The base clock is 1830 MHz and the boost clock is 2460 MHz. Memory runs at 2125 MHz effective (17 Gbps). The top memory at 8 GB is sufficient for Outriders’ typical textures at 1080p and 1440p, but it likely saturates at 4K Ultra, which explains the large drops in average FPS (44 at High, 32 at Ultra) relative to 1080p (High 134, Ultra 97). The game’s VRAM demand is not directly reported, but the measured data shows a precipitous decline when rising to 4K, which is typical of memory-bound scenarios.
The GPU’s compute throughput is 15.11 TFLOPS (FP32), and it has 3072 shading units, 96 TMUs, 48 ROPs, 24 RT cores, and 96 tensor cores. These raw specs place it in a mid-range segment, conformance with its 61st percentile. In Outriders, the RTX 4060 sustains an average of 134/97/84/61 FPS at 1080p Ultra, 1440p Ultra, and 4K Ultra respectively. The drop from 1080p to 1440p is about 37%, and from 1080p to 4K is about 67% (Ultra). It is a typical pattern for a mainstream GPU: at 1080p the load is moderate, but at 4K the shader demand dominates.
The GPU’s passmark G3D score is 19,545, and its 3DMark Steel Nomad DX12 score is 2,302. These confirm it is a strong performer for 1080p and usable for 1440p, but insufficient for 4K Ultra in this game. One oddity is the direct comparison: the Radeon HD 7790 (a 2013 card) scores essentially the same in the average benchmark, but that is a different generation and architecture; the RTX 4060 relies on features like ray tracing (24 RT cores) which are not heavily using by Outriders (no RT required). Its advantage shows in 4K, still remains limited.
Measured FPS Breakdown
Below is the complete set of measured average FPS (and where available, min and max) for each preset and resolution.
1920x1080
- Low: 232 avg (no min/max reported)
- Medium: 178 avg, 152 min, 205 max
- High: 134 avg
- Ultra: 97 avg
2560x1440
- Low: 155 avg
- Medium: 112 avg, 96 min, 129 max
- High: 84 avg
- Ultra: 61 avg
3840x2160
- Low: 81 avg
- Medium: 59 avg, 50 min, 68 max
- High: 44 avg
- Ultra: 32 avg
The data shows a consistent pattern: High gains roughly 50% more FPS than Ultra at each resolution (134 vs 97 at 1080p, 84 vs 61 at 1440p, 44 vs 32 at 4K). Medium adds a further 33–40% over High, and Low doubles the FPS from High at any resolution. For example, at 1440p High has 84 FPS, while Low has 155 (a 84% increase). This indicates the GPU is heavily ‹potentially› tied to character draw and post-processing rather than geometry, but the exact cause is not measured.
The minimum/maximum values are only given for the Medium setting at all three resolutions. At 1080p, the variation is 205–152, a 53 FPS spread; 1440p 129–96 (33 spread); 4K 68–50 (18 spread). The decreasing spread with resolution matches the scaling of average FPS—higher resolution reduces the steel and stabilizes the 1% lows less, possibly because the bottleneck shifts from geometry to fillrate.
FAQ
Q: What is the maximum average FPS achievable at 1440p in Outriders?
A: The highest average FPS recorded at 2560x1440 is 155 FPS, achieved with the Low preset. There is no value above that in the measured rows.
Q: Does the RTX 4060 maintain 60 FPS at 1440p Ultra?
A: Yes, the measured average at 2560x1440 Ultra is 61 FPS, just above the 60 FPS threshold. However, the High preset provides 84 FPS for a better margin.
Q: Is 4K playable with this combination?
A: At 3840x2160, only the Medium preset nears 60 FPS with a 59 FPS average (min 50). The Low preset averages 81 FPS, High 44 FPS, and Ultra 32 FPS. So only Medium or Low is acceptable for a smooth experience.
Q: What is the largest FPS difference between the lowest and highest settings at any resolution?
A: At 1920×1080, comparing Low (232 FPS) to Ultra (97 FPS) gives a 135 FPS gap. The same ratio shows at other resolutions; the closest is 4K where Low (81 FPS) is 49 FPS higher than Ultra (32 FPS).
Q: Which preset gives the best frame-time stability?
A: The Medium preset is the only one with recorded minimum and maximum values. At 1080p the spread is 152–205; at 1440p it is 96–129; at 4K it is 50–68. The range shrinks as resolution drops, but the data does not provide (1% lows) for other presets, so a strict stability comparison is not possible.
Q: Does the CPU’s 8-core/16-thread design limit the frame rate?
A: The monitored FPS at 1080p Low (232) shows that the CPU can feed the GPU far above what the GPU can process at higher settings—at 1080p Low the average is 232 FPS, indicating the Ryzen 7 7800X3D is not the bottleneck at that point. At 4K Ultra, the CPU has little effect, as the GPU limits to 32 FPS.
CPU Role
The AMD Ryzen 7 7800X3D sits on the AM5 socket, Zen 4 architecture (codenamed Raphael) with 8 cores and 16 threads. Its base is 4.20 GHz and boost is up to 5.00 GHz. Its TDP is 120 W, and it has a 96 MB shared L3 cache plus large L2 caches (1 MB per core). The CPU includes integrated Radeon Graphics, but all render here is from the RTX 4060.
The CPU benchmarks show strong multi-threaded capability: a Cinebench R23 multi-core score of 16,817 and single-core of 1,713. The 3DMark numbers are typical, but the takeaway is that the 7800X3D supports high frame rate scenarios. The measured average FPS at 1080p Low (232 FPS) demonstrates that the CPU can deliver frame data faster than the GPU displays at that preset, meaning the RTX 4060 is the hard limit. At 1440p Low (155 FPS) the same pattern holds; the GPU remains the bottleneck. The 4K Ultra pressed to 32 FPS shows the GPU is saturated, without any CPU involvement.
In terms of raw compute power, the CPU’s pass mark multi-thread score is 34,293, and its pass mark single-thread score is 3,759. This places in balance with the GPU’s workload; embedding 3D Mark 16 threads (7,980) and max threads (7,967) indicate similar performance levels in parallel workloads. The memory bandwidth of 83.2 GB/s is shared with the GPU via the system memory, but the GPU has its own 272 GB/s.
In Outriders, the game engine is not particularly CPU-heavy; the measured FPS declines from 1320p to 4K by a factor of roughly 8.1–3.0, which strongly correlates with the GPU’s pixel fillrate. The CPU scaling is not observable because the frames drop never shows a CPU limiting scenario—even at 1080p Low, the GPU reaches 232 FPS, a rate that a 8-core Zen 4 can sustain. Therefore, the Ryzen 7 7800X3D’s role in this combo is to avoid holding back the GPU at lower resolutions, while at 4K it is idle.
Given the results, players with a 4K monitor will need to rely on Medium to get playable frame rates, while 1440p users can enable Ultra at 61 FPS. For maximum FPS competition modes, a lower preset is optional. The overall ranking (1,858 of 3,720) suggests that this is a solid pairing but not a top-tier one for Outriders—likely due to the GPU’s moderate memory size and bus width. Upgrading the GPU to a larger-power tier would shift the rankings as the CPU has the headroom.
Hardware Specifications
AMD Ryzen 7 7800X3D
NVIDIA GeForce RTX 4060
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 7800X3D + NVIDIA GeForce RTX 4060 in Outriders
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 81.0 |
| 3840x2160 | Medium | 59.0 |
| 3840x2160 | High | 44.0 |
| 3840x2160 | Ultra | 32.0 |
| 2560x1440 | Low | 155.0 |
| 2560x1440 | Medium | 112.0 |
| 2560x1440 | High | 84.0 |
| 2560x1440 | Ultra | 61.0 |
| 1920x1080 | Low | 232.0 |
| 1920x1080 | Medium | 178.0 |
| 1920x1080 | High | 134.0 |
| 1920x1080 | Ultra | 97.0 |
Outriders with Ryzen 7 7800X3D + Other GPUs
See how Outriders performs with the same CPU but different graphics cards.
Outriders with RTX 4060 + Other CPUs
See how Outriders performs with the same GPU but different processors.
Other Games with Ryzen 7 7800X3D + RTX 4060
Explore FPS benchmarks for other games using this same hardware combination.