Outriders

Outriders

AVERAGE FPS
90
good

This combination provides smooth gameplay with an average of 90 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 27 39 50 68
1440p QHD 49 69 94 131
1080p Full HD 79 113 149 208

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 68
3840x2160 Medium 50
3840x2160 High 39
3840x2160 Ultra 27
2560x1440 Low 131
2560x1440 Medium 94
2560x1440 High 69
2560x1440 Ultra 49
1920x1080 Low 208
1920x1080 Medium 149
1920x1080 High 113
1920x1080 Ultra 79

Outriders with AMD Ryzen 5 7600 + NVIDIA GeForce RTX 3060 Ti, In-Depth Analysis

The AMD Ryzen 5 7600 and NVIDIA GeForce RTX 3060 Ti combo lands at rank 1186 out of 1693 tested combinations for Outriders. That places this pairing in the lower-middle portion of the database, meaning it will run the game, but it is not going to dominate high-refresh or high-resolution scenarios. The ranking reflects a balanced mid-range setup where neither component is a standout outlier, but the GPU becomes the primary constraint as resolution climbs.

How This Combo Ranks

Outriders is a looter shooter that leans on sustained combat and particle effects, and the data places this CPU-GPU pair at 1186 of 1693 combos. That percentile position—roughly in the 30th percentile of all tested pairings—tells you the system is capable of playable frame rates at most settings, but it is far from the top tier. The ranking accounts for both CPU and GPU contributions, and in this case the GPU’s limits show up earlier than the CPU’s. The Ryzen 5 7600 is a strong modern processor, but the RTX 3060 Ti is a mid-range card from the previous generation, and that pairing caps the overall result. For comparison, the CPU’s average benchmark score of 26617 places it near the AMD Ryzen 7 5800X3D, which scores 26574 with a delta of 0.2 percent, and the Intel Core i9-12900HK at 26672 with a delta of -0.2 percent. The GPU’s average score of 25120 sits close to the AMD Radeon RX 6700M at 25180, a delta of -0.2 percent, and the AMD Radeon RX 6600 at 25235, a delta of -0.5 percent. So the combo rank is consistent with what the individual component scores suggest: a capable, but not exceptional, pairing for Outriders.

GPU Role

The RTX 3060 Ti brings 8 GB of GDDR6 memory on a 256-bit bus, with a bandwidth of 448.0 GB/s. Memory clocks run at 1750 MHz, which translates to 14 Gbps effective. The GPU’s base clock is 1410 MHz and boost clock is 1665 MHz. These specs matter for Outriders because the game’s environments are dense with effects and geometry, and the 8 GB frame buffer becomes a limiting factor at higher resolutions. At 4K Ultra, the combo averages 26.5 FPS, which is below playable for most users. At 4K High, it reaches 39.4 FPS, still rough. Dropping to 4K Low yields 68 FPS, showing that the card can handle the resolution if settings are reduced heavily. The GPU’s 4864 shading units and 80 ROPs contribute to its raw throughput, but the memory bandwidth and capacity are what dictate performance in this title. The card’s passmark G3D score of 20349 and its percentile of 69 against all GPUs reinforce that it is a mid-tier performer. In Outriders, the GPU is the component that determines whether you can push beyond 1080p Medium without stutter.

FAQ

Q: Can this combo run Outriders at 1080p with high settings?

A: Yes. At 1920x1080 High, the measured average FPS is 112.5. That is well above the 60 FPS threshold for smooth play, and it gives headroom for background tasks or recording.

Q: What is the best setting for a 1440p monitor with this combo?

A: At 2560x1440 Medium, the average FPS is 94.2, which is solid for fast-paced combat. High settings drop to 69 FPS, still playable, but Medium offers a better balance for keeping frame times consistent.

Q: Is 4K gaming viable with the RTX 3060 Ti in Outriders?

A: Only with low settings. At 3840x2160 Low, the average FPS is 68, which is acceptable. Medium drops to 49.8, High to 39.4, and Ultra to 26.5, so 4K High or Ultra is not recommended.

Q: How does the CPU compare to its nearest rivals in synthetic benchmarks?

A: The Ryzen 5 7600 scores 26617 on average, which is 0.2 percent higher than the AMD Ryzen 7 5800X3D at 26574, and 0.2 percent higher than the AMD EPYC 8024P at 26555. It is 0.2 percent behind the Intel Core i9-12900HK at 26672.

Q: Does the GPU have enough memory for Outriders at higher resolutions?

A: The 8 GB frame buffer is adequate for 1080p and 1440p, but at 4K Ultra the average FPS falls to 26.5, indicating the memory capacity and bandwidth are stressed. Reducing settings to Low at 4K brings the average up to 68 FPS.

Q: What is the CPU’s single-thread performance like for this game?

A: The Ryzen 5 7600 scores 3246 in Cinebench R23 single-core and 999 in 3DMark single-thread. These numbers show strong single-core capability, which helps with Outriders’ game logic and physics, though the GPU is the primary limiter in most scenarios.

Measured FPS Breakdown

At 1920x1080, the combo delivers its best results. Low settings produce an average of 208.4 FPS, Medium hits 149.1 FPS, High reaches 112.5 FPS, and Ultra falls to 79.2 FPS. These numbers show that at 1080p, the RTX 3060 Ti is the bottleneck only at Ultra, where the frame rate still stays above 75 FPS. At 2560x1440, the scaling is predictable: Low averages 130.9 FPS, Medium 94.2 FPS, High 69 FPS, and Ultra 49.4 FPS. The drop from High to Ultra at 1440p is steep—nearly 20 FPS—which points to the GPU’s memory and shading limits being hit hard by the Ultra preset. At 3840x2160, the card struggles. Low averages 68 FPS, Medium 49.8 FPS, High 39.4 FPS, and Ultra 26.5 FPS. The 4K Ultra result is the lowest in the entire dataset, and even 4K High is below the 60 FPS target. For a smooth experience at 4K, you must use Low settings, and even then the average is just above 60 FPS.

Resolution Scaling

The scaling from 1080p to 4K shows a clear pattern of GPU limitation. At 1080p Low, the average is 208.4 FPS. Moving to 1440p Low drops that to 130.9 FPS, a reduction of about 37 percent. At 4K Low, the average falls to 68 FPS, another 48 percent drop from 1440p. This steep decline is typical for a mid-range GPU with 8 GB of memory; the pixel count increase outpaces the card’s bandwidth and fill rate. At High settings, the trend is similar but less dramatic in percentage terms: 112.5 FPS at 1080p, 69 FPS at 1440p, and 39.4 FPS at 4K. The gap between 1080p and 1440p High is 43.5 FPS, while the gap between 1440p and 4K High is 29.6 FPS. This suggests that at 1080p, the CPU is still contributing some headroom, but by 1440p the GPU is fully saturated. At 4K, the GPU is the sole limiting factor, as evidenced by the 26.5 FPS Ultra result, which is below the 30 FPS threshold for most playable experiences. The data indicates that for this combo, 1440p Medium or High is the sweet spot, while 1080p Ultra is the highest setting that maintains a solid frame rate.

CPU Role

The AMD Ryzen 5 7600 is a 6-core, 12-thread processor based on Zen 4 architecture, with a base clock of 3.80 GHz and a boost clock of 5.10 GHz. It has 32 MB of shared L3 cache and supports DDR5 memory with a dual-channel bus and 83.2 GB/s bandwidth. In Outriders, the CPU’s role is to feed the GPU with draw calls and handle game logic, and the data suggests it does that without becoming a major bottleneck at most settings. The Cinebench R23 multicore score of 22992 and single-core score of 3246 show strong performance, and the 3DMark max-threads score of 6503 confirms it can handle multi-threaded workloads. However, the measured FPS at 1080p Low (208.4 FPS) versus 1080p Ultra (79.2 FPS) shows that the GPU, not the CPU, is driving the performance curve. At 1080p Low, the CPU is able to push the GPU to its maximum, but at higher settings the GPU’s rendering load dominates. The CPU’s percentile of 83 against all CPUs places it well above average, and its nearest rivals include the Ryzen 7 5800X3D and Core i9-12900HK, both of which are powerful chips. In this game, the Ryzen 5 7600 provides ample headroom, and the combo’s rank is dragged down by the GPU’s limits at 4K. For 1080p and 1440p gaming, the CPU is more than sufficient, and upgrading the GPU would yield a larger FPS improvement than swapping the processor.

Hardware Specifications

AMD Ryzen 5 7600

Cores / Threads 6 / 12
Base Clock 3800 MHz
Boost Clock 5100 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

NVIDIA GeForce RTX 3060 Ti

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 1665 MHz MHz
TDP 200 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 7600 + NVIDIA GeForce RTX 3060 Ti in Outriders

Resolution Settings Avg FPS
3840x2160 Low 68.0
3840x2160 Medium 49.8
3840x2160 High 39.4
3840x2160 Ultra 26.5
2560x1440 Low 130.9
2560x1440 Medium 94.2
2560x1440 High 69.0
2560x1440 Ultra 49.4
1920x1080 Low 208.4
1920x1080 Medium 149.1
1920x1080 High 112.5
1920x1080 Ultra 79.2

Outriders with Ryzen 5 7600 + Other GPUs

See how Outriders performs with the same CPU but different graphics cards.

Outriders with RTX 3060 Ti + Other CPUs

See how Outriders performs with the same GPU but different processors.

Other Games with Ryzen 5 7600 + RTX 3060 Ti

Explore FPS benchmarks for other games using this same hardware combination.