Minimum

# Minimum — AMD Ryzen 5 7500F + NVIDIA GeForce RTX 5070 Ti

The AMD Ryzen 5 7500F paired with the NVIDIA GeForce RTX 5070 Ti delivers a benchmark profile in Minimum that is heavily resolution-dependent, with the GPU becoming the clear limiting factor at 4K while the CPU's strong single-thread performance keeps frame rates high at 1080p. Measured data across three resolutions and four quality settings shows a system that scales predictably with both pixel count and graphical load, though the relationship between settings and frame rate reveals where each component's headroom ends.

Resolution Scaling

The measured FPS data shows a steep drop as resolution increases from 1920x1080 to 3840x2160, with the magnitude of that drop varying significantly by quality setting. At High settings, the average frame rate falls from 221.4 FPS at 1080p to 139.1 FPS at 1440p, then to 75.3 FPS at 4K — a reduction of approximately 66% from 1080p to 4K. This pattern indicates that the GPU is the dominant constraint at higher resolutions, as the pixel count quadruples from 1080p to 4K while the frame rate does not scale proportionally.

At Low settings, the scaling is even more dramatic: 343 FPS at 1080p, 220.3 FPS at 1440p, and 120.7 FPS at 4K. The 1080p Low result of 343 FPS suggests the CPU is approaching its limit at that resolution, since the GPU has ample headroom to render frames far faster than the processor can feed it. The fact that 4K Low still achieves 120.7 FPS, which is higher than 4K High's 75.3 FPS, reinforces that graphical settings — not resolution alone — determine the GPU workload.

Medium settings show a similar curve: 262.6 FPS at 1080p, 168.7 FPS at 1440p, and 87.6 FPS at 4K. Ultra settings produce the lowest frame rates across all resolutions: 167 FPS at 1080p, 108.8 FPS at 1440p, and 55.6 FPS at 4K. The Ultra 4K result of 55.6 FPS is the only measured configuration that falls below 60 FPS, indicating that this combo can maintain playable frame rates at 4K only when settings are reduced to Medium or below.

The delta between 1440p and 4K is proportionally larger than the delta between 1080p and 1440p across all settings, which aligns with the pixel-count increase being more substantial at the higher step. This scaling behavior confirms that the RTX 5070 Ti's rendering capability is the binding constraint at 4K, while at 1080p the Ryzen 5 7500F's processing speed becomes comparatively more important.

GPU Role

The NVIDIA GeForce RTX 5070 Ti is built on the Blackwell 2.0 architecture with a 5 nm process node from TSMC, containing 45,600 million transistors on a 378 mm² die. Its memory subsystem features 16 GB of GDDR7 on a 256-bit bus, yielding 896.0 GB/s of bandwidth — a figure that becomes relevant when analyzing 4K performance, where texture data and frame buffer demands increase substantially.

The GPU's clock behavior shows a base clock of 2295 MHz and a boost clock of 2452 MHz, with memory running at 1750 MHz (28 Gbps effective). These clocks, combined with 8960 shading units and 96 ROPs, produce a pixel rate of 235.4 GPixel/s and a texture rate of 686.6 GTexel/s. The FP32 throughput of 43.94 TFLOPS places this GPU in the upper tier of the benchmark database, with a percentile ranking of 87 against all GPUs.

In Minimum, the GPU's role is most evident in the Ultra setting results. The drop from High to Ultra at 4K — from 75.3 FPS to 55.6 FPS — represents a 26% performance penalty, while the same setting change at 1080p only reduces frame rates from 221.4 FPS to 167 FPS. This disproportionate impact at 4K indicates that Ultra settings introduce rendering features that heavily tax the GPU's shading and memory bandwidth, rather than the CPU. The RTX 5070 Ti's nearest rival, the NVIDIA GeForce RTX 4080, shows a deltaPct of 0 in average benchmark score, suggesting near-identical general compute performance, though game-specific results may differ.

The GPU's 16 GB frame buffer is sufficient even at 4K Ultra, as evidenced by the measured data showing playable frame rates (above 55 FPS) rather than catastrophic drops that would indicate memory capacity exhaustion. The bandwidth figure of 896.0 GB/s appears adequate for the game's demands at 4K, since the scaling from 1440p to 4K follows a consistent pattern rather than showing an anomalous cliff.

CPU Role

The AMD Ryzen 5 7500F is a 6-core, 12-thread processor based on the Zen 4 architecture (Raphael codename), manufactured on TSMC's 5 nm process. It operates with a base clock of 3.70 GHz and a boost clock of 5.00 GHz, with 64 KB L1 cache per core, 1 MB L2 per core, and 32 MB shared L3 cache. Its dual-channel DDR5 memory support provides 83.2 GB/s of bandwidth, and the CPU is unlocked for overclocking.

Benchmark data shows this CPU's single-thread strength: a 3dmark single-thread score of 974 and a Cinebench R23 single-core score of 3218. Multi-thread performance is solid for a 6-core part, with Cinebench R23 multicore reaching 22799 and Geekbench multicore at 12686. The CPU's percentile ranking against all processors is 82, with its nearest rival being the Intel Core i7-11850H at a deltaPct of 0.1 — essentially a statistical tie in average benchmark score.

In Minimum, the CPU's role becomes apparent at 1080p Low, where the system achieves 343 FPS. This figure represents the practical ceiling imposed by the processor's ability to submit draw calls and update game state, since the GPU could likely render more frames if fed faster. The Ryzen 5 7500F's boost clock of 5.00 GHz and strong single-thread performance are what enable such high frame rates in a third-person shooter, where per-frame CPU work is often concentrated on a few threads.

However, the CPU is not the primary bottleneck at higher resolutions. At 1440p High, the frame rate of 139.1 FPS is roughly 63% of the 1080p High result, which suggests the GPU is now the limiting factor. The CPU's 12 threads handle the game's multi-threaded workload adequately, as evidenced by the fact that 1080p results scale consistently with settings changes — if the CPU were severely limited, we would expect similar frame rates across different quality settings at the same resolution. The 1080p spread from 167 FPS (Ultra) to 343 FPS (Low) demonstrates that the CPU has enough headroom to allow GPU-bound settings to significantly affect output.

How This Combo Ranks

Among the 1733 tested combinations in the benchmark database, this pairing of the AMD Ryzen 5 7500F with the NVIDIA GeForce RTX 5070 Ti ranks 144th in Minimum. This places it in the top 8.3% of all tested combos, a strong result that reflects both components' high individual percentiles — 82 for the CPU and 87 for the GPU.

The CPU's nearest rivals in average benchmark score include the AMD Ryzen 7 2700X (deltaPct -0.3) and the AMD Ryzen 5 8400F (deltaPct -0.3), both of which are effectively tied with the 7500F. The Intel Core i7-11850H is 0.1% ahead, while the AMD Ryzen 9 6900HX is 0.4% ahead. These tight deltas indicate that the 7500F's performance is well-matched to other mid-range processors, and system-level differences in Minimum are more likely attributable to the GPU.

The GPU's nearest rival, the NVIDIA GeForce RTX 4080, shows a deltaPct of 0, meaning the two cards are statistically indistinguishable in average benchmark performance. The AMD Radeon RX 7700S is 0.8% behind, while the NVIDIA RTX A1000 is 2.5% ahead and the AMD Radeon Pro W6600M is 2.5% behind. This positioning suggests the RTX 5070 Ti is a high-end part whose game-specific performance in Minimum aligns with its general compute ranking.

The rank of 144 out of 1733 is driven primarily by the GPU's ability to maintain high frame rates at 4K and the CPU's capacity to push very high frame rates at 1080p. Combos ranking above this pairing likely feature even stronger CPUs or GPUs (or both), but the data shows this combination offers a balanced profile where neither component dramatically limits the other in most tested configurations.

FAQ

*Q: What is the best resolution for this combo in Minimum?*

A: The measured data shows 1440p High achieving 139.1 FPS, which is comfortably above 60 FPS while still delivering high visual quality. At 4K High, the average drops to 75.3 FPS, which is playable but leaves less headroom. At 1080p, all settings exceed 160 FPS, with Low reaching 343 FPS.

*Q: Can this system handle 4K Ultra settings in Minimum?*

A: The measured 4K Ultra average is 55.6 FPS, which is below the 60 FPS threshold that many consider the minimum for smooth gameplay. Dropping to 4K Medium raises the average to 87.6 FPS, while 4K High achieves 75.3 FPS, so players targeting 4K should use High or Medium settings.

Q: How does the CPU compare to its closest rivals?

A: The Ryzen 5 7500F has an average benchmark score of 24993, which is 0.1% behind the Intel Core i7-11850H (24974) and 0.3% behind the AMD Ryzen 7 2700X (25057) and AMD Ryzen 5 8400F (25064). The AMD Ryzen 9 6900HX (24897) is 0.4% behind the 7500F.

Q: What GPU is most similar to the RTX 5070 Ti in general performance?

A: The NVIDIA GeForce RTX 4080 shows a deltaPct of 0, meaning their average benchmark scores are essentially identical. The RTX 5070 Ti scores 52086 on average, while the RTX 4080 scores 52085. The AMD Radeon RX 7700S is 0.8% behind, and the AMD Radeon Pro W6600M is 2.5% behind.

Q: Does the 16 GB VRAM limit performance at 4K?

A: The measured 4K results show consistent scaling from Medium (87.6 FPS) to High (75.3 FPS) to Ultra (55.6 FPS), without the dramatic frame rate collapse that would indicate VRAM capacity exhaustion. The 896.0 GB/s memory bandwidth appears sufficient for this game's 4K demands.

Q: Is the CPU or GPU the bottleneck at 1080p?

A: At 1080p Low, the system achieves 343 FPS, which is likely near the CPU's maximum frame rate ceiling given its 5.00 GHz boost clock and 6-core/12-thread configuration. The wide spread between 1080p Low (343 FPS) and 1080p Ultra (167 FPS) indicates the GPU is the limiting factor when settings increase, but the CPU constrains maximum achievable frame rates at lower settings.