Minecraft

Minecraft couples the AMD Ryzen 7 9700F with the NVIDIA GeForce RTX 3060 Ti in a benchmark profile that reveals distinct frame-rate behavior across resolutions and quality presets. The measured data places this combination at rank 1802 out of 3710 tested combos, with the CPU scoring 96 percentile vs. all CPUs and the GPU at 59 percentile vs. all GPUs. The dataset includes values for 1080p, 1440p, and 4K under Low, Medium, High, and Ultra settings, along with the CPU's launch MSRP of $289 and the GPU's launch MSRP of $399 USD.

How This Combo Ranks

The rank of 1802 out of 3710 represents a mid-tier position among all CPU-GPU combos tested for Minecraft. The Ryzen 7 9700F alone holds the 94th percentile among all CPUs, giving it substantial single-thread capability, while the RTX 3060 Ti sits at the 59th percentile of all GPUs. The combined score reflects a balance where the CPU is relatively strong and the GPU is more modest by comparison. Given the game's reputation for CPU sensitivity, the high CPU percentile likely explains why the combo manages to stay near the middle despite a GPU that ranks only slightly above average. The data also shows that the CPU's average benchmark score is 69,996 points, whereas the GPU average is 16,129 points—two very different scales that indicate Minecraft's frame rates are highly responsive to the CPU's performance.

GPU Role

The GPU's memory capacity is 8 GB of GDDR6, connected via a 256-bit bus, delivering a peak bandwidth of 448 GB/s. Its GPU clocks measure 1410 MHz at base and 1665 MHz at boost, and the card is built on the Ampere architecture with 4864 shading units, 152 TMUs, 80 ROPs, 38 RT cores, and 152 Tensor cores. The pixel rate is 133.2 GPixel/s, texture rate is 253.1 GTexel/s, and the FP32 throughput is 16.20 TFLOPS.

In Minecraft, the GPU clock speed and memory bandwidth directly influence the frame delivery. At 4K Ultra, the combo yields an average of 62 FPS, while at 4K Medium the average climbs to 125 FPS with a min of 106 FPS and a max of 144 FPS. The GPU can handle the heavy geometry and texture loads of Minecraft when the settings are lowered, but the heavy workload at Ultra at 4K leaves it just above the 60 FPS threshold. The GPU's 8 GB VRAM is an essential factor for high-resolution rendering: at 4K, even the Medium preset with many blocks can fill that memory, though the measured data does not show any out-of-memory artifacts because Minecraft's asset size is relatively modest. The boost clock of 1665 MHz enables a consistent frame rate up to 1440p, where 190 FPS appears at High settings. The GPU's architecture supports real-time Raytracing and DLSS, but Minecraft does not force those features in the measurement set, so the core performance is driven purely by the classic Visety pipeline.

Settings Recommendations

The measured FPS table suggests that the Medium preset delivers the best balance across all three tested resolutions. At 1080p, Medium produces an average of 380 FPS (min 323, max 437) – only 21% lower than the Low preset's 479 FPS but significantly higher than High's 301 FPS and Ultra's 188 FPS. At 1440p, Medium gives 240 FPS (min 204, max 275) while High reaches 190 FPS and Ultra 119 FPS. Switching to 4K, Medium is the highest-preset that still stays above 100 FPS, with an average of 125 FPS (min 106, max 144); High drops to 66 FPS and Ultra to 62 FPS. Thus, for a crisp 1440p or 1080p experience, choosing Medium provides a large margin above the 60 FPS knee, while accommodating shader cores and chunk updates without causing stutter. At 4K Ultra, the frame rate is too low for fluid gameplay, so earlier on Ultra is not advised unless the user prefers absolute visual fidelity over playback. The Low preset at 4K delivers 158 FPS, which is high but loses significant depth of field. For a stable 4K experience, Medium is the recommended presets combination as measured: it maintains a substantial framerate while retaining the majority of Minecraft's graphical environment.

Measured FPS Breakdown

4K (3840×2160)

| Settings | Average FPS | Min FPS | Max FPS |

|----------|-------------|---------|---------|

| Low | 158 | – | – |

| Medium | 125 | 106 | 144 |

| High | 99 | – | – |

| Ultra | 62 | – | – |

WQHD (2560×1440)

| Settings | Average FPS | Min FPS | Max FPS |

|----------|-------------|---------|---------|

| Low | 302 | – | – |

| Medium | 204 | 204 | 275 |

| High | 190 | – | – |

| Ultra | 119 | – | – |

FHD (1920×1080)

| Settings | Average FPS | Min FPS | Max FPS |

|----------|-------------|---------|---------|

| Low | 204 | – | – |

| Medium | 204 | 323 | 437 |

| High | 301 | – | – |

| Ultra | 188 | – | – |

The table shows a consistent progression: as resolution increases from 1080p to 4K, average FPS falls across every preset. For instance, Low at 1080p yields 479 FPS, while the same Low preset at 4K yields 204 FPS – a severe drop. Medium, which is the only preset with recorded min/max data, illustrates a stable frame range: at 4K, the yields 106 FPS and highs 144 FPS; at 1440p, the range is 204 to 275 FPS; at 1080p, it is 323 to 437 FPS. The Ultra preset consistently yields the lowest FPS among all, with 188 FPS at 1080p, 119 FPS at 1440p, and 62 FPS at 4K. These numbers indicate that the GPU increasingly becomes the primary limiting factor when rendering at higher resolutions, while at 1080p even the Ultra preset still exceeds 180 FPS, freeing the CPU to convey a high frame rate.

FAQ

Q: What is the base and boost clock of the AMD Ryzen 7 9700F?

A: The CPU runs at a base clock of 3.80 GHz and a boost clock of 5.50 GHz.

Q: How much VRAM does the RTX 3060 Ti have, and what is the memory speed?

A: The GPU has 8 GB of GDDR6 memory, with an effective speed of 14 Gbps and a memory bandwidth of 448.0 GB/s.

Q: What measured frame rates does the combo deliver in 3840×2160 with High settings?

A: The average FPS at 4K High is exactly 99 FPS.

Q: At which preset does the GPU produce its maximum measured average FPS?

A: The highest average FPS recorded is 479 FPS, which occurs at 1920×1080 with Low settings.

Q: How does the Ryzen 2025's single-thread score compare to its nearest CPU and card?

A: The CPU's single-thread score (PassMark) is 4691, while the nearest CPU rival in overall average score, the AMD Ryzen 9 7940HX, is 0.2% higher in deltaPct, and the Intel Core i7-14700KF is 0.2% lower in deltaPct.

Q: What is the average GPU mass benchmark score and how does it compare to its closest GPU competitor?

A: The RTX 3060 Ti has an average benchmark score of 16129, and the nearest rival, the AMD Radeon RX 9060, shows a deltaPct of 0.7% (i.e., 16014).

CPU Role

The CPU contributes 8 cores, 16 threads, base 3.80 GHz, boost 5.50 GHz, and 32 MB L3 cache total, built on Zen 5 (Granite Ridge) at 4 nm. The Ryzen 7 9700F's integrated single-thread score of 4691 is a strong indicator for Minecraft's performance, since the game's integer and rounding operations mostly rely on a few core threads. The multithread score of 36470 and passmark single-thread scores show that the CPU is not the principal constraining factor in the measured data. However, at 1080p Low the FPS reaches 204 vs 479 at 1080p Low, all within the same processor. The high-speed boost clock of 5.5 GHz allows the CPU to execute the many small updates per frame of the block world with relative ease. The CPU's average benchmark score of 69996 (94th percentile) is about 98.7% of that obtained from the nearest rivals. At 4K Ultra, the FPS drops to 62 FPS, but the CPU still has no trouble feeding the GPU because the game's settings apply mostly graphics load rather than Android.

Resolution Scaling

The measured data provide a distinct view of how FPS scales from 1080p to 4K. At the lowest preset (Low), average FPS goes from 479 at 1080p to 302 at 1440p and finally 158 at 4K, showing a steep reduction as pixel work expands. At Medium, the numbers are 380, 240, and 125, respectively; High settings yield 301, 190, and 99; Ultra yields 188, 119, and 62. The relative decrease suggests that as resolution climbs, the GPU’s fill-rate and memory bandwidth dominate the limiter. At 1080p, the CPU is still capable of generating a large number of frames because the GPU only needs to render a modest pixel count; the 479 FPS low-per-adds result is likely limited by the game's frame output lock or the CPU’s single-thread capacity. At 1080p Ultra, the frame rate is still 188 FPS, which is more than enough for refresh rates typical of gamer monitors. Moving to 4K, the GPU must render 8.3 million pixels per frame, and the measured drop to 62 FPS on Ultra demonstrates that the GPU’s 163 GTex/s and 448 GB/s bandwidth become the constraining resource. The resolution data clearly indicate that the combo is balanced at 1440p, where even High and Ultra deliver 190 and 119 FPS, but becomes GPU-bound at 4K, making the CPU's strides feel unnecessary in that scenario. For a consistent experience across all settings, 1080p presents High and Ultra settings with FPS surpassing 100, and 4K basically requires Medium to stay at the prevention.