Minecraft
This combination delivers exceptional performance with an average of 202 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 57 | 91 | 115 | 145 |
| 1440p QHD | 109 | 174 | 220 | 277 |
| 1080p Full HD | 173 | 276 | 348 | 440 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Minecraft with AMD Ryzen 5 7600 + NVIDIA GeForce GTX 1080 Ti, In-Depth Analysis
The AMD Ryzen 5 7600 paired with the NVIDIA GeForce GTX 1080 Ti produces a wide spread of frame rates in Minecraft, ranging from 440 FPS at 1080p Low to 57 FPS at 4K Ultra. The data shows a clear pattern where the GPU becomes the primary constraint as resolution increases, while the CPU’s strong single-thread performance keeps frame rates exceptionally high at lower resolutions. This combination ranks in the 56th percentile of tested combos, indicating a mid-tier placement for this title.
Resolution Scaling
The measured FPS data reveals a significant drop in performance as resolution increases from 1920x1080 to 3840x2160. At High settings, the average frame rate falls from 276 FPS at 1080p to 174 FPS at 1440p, a reduction of 102 FPS, and then further down to 91 FPS at 4K, another 83 FPS decrease. This translates to a 67% reduction in frame rate from 1080p to 4K at High settings, showing that the GTX 1080 Ti’s rendering capabilities are heavily taxed at higher pixel counts.
The scaling pattern differs across settings presets. At Low settings, the drop from 440 FPS at 1080p to 277 FPS at 1440p is 163 FPS, and then to 145 FPS at 4K, a further 132 FPS reduction. The percentage drop from 1080p to 4K at Low is 67%, identical to High settings. However, at Ultra settings, the frame rate falls from 173 FPS at 1080p to 109 FPS at 1440p (a 64 FPS drop) and then to 57 FPS at 4K (a 52 FPS drop), representing a 67% total reduction as well.
These consistent percentage drops across all settings indicate that resolution scaling is primarily GPU-bound. The GTX 1080 Ti, with its 11 GB of GDDR5X memory and 484.4 GB/s bandwidth, handles the increased pixel workload, but the frame rate halving from 1080p to 4K suggests that the GPU’s compute units are the limiting factor rather than memory capacity. The data shows that at 1080p, the CPU is capable of feeding the GPU with enough frames to reach 440 FPS at Low, but at 4K, the GPU’s pixel fill rate and shading throughput become the bottleneck, capping performance at 145 FPS even at Low settings.
FAQ
Q: What is the highest average frame rate achievable with this combo?
A: The highest measured average frame rate is 440 FPS at 1920x1080 with Low settings. This drops to 348 FPS at Medium and 276 FPS at High, showing that even at 1080p, settings choices significantly impact performance.
Q: How does the combo perform at 4K resolution?
A: At 3840x2160, the average frame rates range from 145 FPS at Low settings to 57 FPS at Ultra. The Medium preset yields 115 FPS with a minimum of 98 FPS and a maximum of 132 FPS, while High settings produce 91 FPS.
Q: Is the Ryzen 5 7600 or GTX 1080 Ti the limiting factor in this game?
A: Benchmark results indicate that at 1080p, the CPU’s single-thread performance (scoring 999 in 3dmark_single_thread) allows for very high frame rates, suggesting the GPU is the limiting factor even at Low settings. At 4K, the GPU is definitively the bottleneck, as frame rates drop uniformly across all settings.
Q: What is the combo’s rank among all tested configurations?
A: This CPU-GPU combination ranks 2074 out of 3710 tested combos for Minecraft, placing it in the 56th percentile. This indicates a slightly above-average performance relative to other configurations.
Q: How does the GTX 1080 Ti compare to its nearest rivals in synthetic benchmarks?
A: The GTX 1080 Ti has an average benchmark score of 15548, which is 0.2% higher than the AMD Radeon R9 M380 and 1.7% higher than both the NVIDIA GeForce RTX 2060 and GeForce GTX 580. The AMD Radeon Pro W5500 scores 0.8% higher.
Q: What are the minimum frame rates recorded at Medium settings?
A: At Medium settings, the minimum frame rates are 296 FPS at 1080p, 187 FPS at 1440p, and 98 FPS at 4K. These minimums represent the lowest recorded frames and show that even at Medium settings, 4K remains playable but with less headroom.
CPU Role
The AMD Ryzen 5 7600 is a 6-core, 12-thread processor from the 7000 series, built on the Zen 4 architecture with a 5 nm process node. Its base clock of 3.80 GHz and boost clock of 5.10 GHz provide substantial single-thread performance, which is critical for Minecraft’s game logic and world generation. The CPU’s 3dmark_single_thread score of 999 and passmark_single_thread score of 3910 indicate strong per-core capability, allowing the game to maintain high frame rates when the GPU is not the bottleneck.
The CPU’s 32 MB of shared L3 cache and 83.2 GB/s memory bandwidth with DDR5 support help reduce latency in chunk loading and entity processing. Benchmark results show a cinebench_r23_singlecore score of 1852, which is 78% above the average CPU percentile, placing the Ryzen 5 7600 in the 78th percentile of all CPUs. This strong single-core performance is evident in the 1080p Low setting result of 440 FPS, where the CPU can feed the GPU with frames faster than it can render them.
The 6-core, 12-thread configuration also handles multithreaded tasks, with a cinebench_r23_multicore score of 12735 and a geekbench_multicore score of 13413. In Minecraft, this translates to smoother performance in modded scenarios or when multiple background processes are active, but the primary factor remains single-thread speed. Compared to its nearest rivals, the Ryzen 5 7600 scores 0.2% higher than the AMD Ryzen 9 6900HX and 0.4% higher than the Intel Core i9-11900KF, while trailing the AMD Ryzen 7 7435HS by 0.3%.
How This Combo Ranks
The combo of the Ryzen 5 7600 and GTX 1080 Ti ranks 2074 out of 3710 tested combinations for Minecraft, placing it in the 56th percentile. This rank indicates that the combo performs better than a majority of configurations, though it is not in the top tier. The ranking reflects a balance between the CPU’s strong single-thread performance and the GPU’s mid-range capabilities relative to modern hardware.
The GTX 1080 Ti, with its percentileVsAllGpus of 58, is slightly above average, while the CPU’s percentileVsAllCpus of 78 is notably higher. This disparity suggests that the CPU has more headroom than the GPU, meaning that upgrading the graphics card would likely yield larger performance gains than upgrading the processor. The combo’s rank of 2074 places it in the middle of the pack, with roughly 56% of tested combos performing worse and 44% performing better.
In practical terms, this rank means the combo can handle Minecraft at high frame rates at 1080p and 1440p, but at 4K, the GPU becomes a limiting factor, pulling the overall rank down. The data shows that at 1440p High, the combo achieves 174 FPS, which is competitive, but 4K Ultra at 57 FPS is below the 60 FPS threshold for smooth gameplay. This positioning suggests the combo is well-suited for 1080p and 1440p gaming but not ideal for 4K enthusiasts.
Settings Recommendations
Based on the measured FPS data, the best experience for this combo depends on the target resolution and frame rate preference. At 1920x1080, all settings presets deliver playable frame rates, with Low at 440 FPS, Medium at 348 FPS, High at 276 FPS, and Ultra at 173 FPS. For competitive play or high refresh rate monitors, Medium settings at 1080p provide a good balance with 348 FPS, while High settings at 276 FPS are also excellent and offer better visual fidelity.
At 2560x1440, the Medium preset yields 220 FPS with a minimum of 187 FPS, making it the recommended choice for smooth gameplay without sacrificing too much visual quality. High settings at 174 FPS are also viable, but Ultra at 109 FPS may be preferable for those prioritizing visuals over frame rate. Low settings at 277 FPS are unnecessary unless aiming for maximum performance.
For 3840x2160, the data shows that Ultra settings at 57 FPS are borderline playable, but Medium settings at 115 FPS provide a much smoother experience. The Medium preset at 4K achieves a minimum of 98 FPS, ensuring consistent performance. High settings at 91 FPS are also acceptable, but Medium offers the best balance of visual quality and frame rate at this resolution. Low settings at 145 FPS are recommended only if frame rate is the absolute priority.
Measured FPS Breakdown
At 1920x1080, the measured average frame rates are 440 FPS at Low, 348 FPS at Medium, 276 FPS at High, and 173 FPS at Ultra. The Medium preset records a minimum of 296 FPS and a maximum of 400 FPS, showing some variance but staying well above 200 FPS. Low and High presets do not have recorded minimum or maximum values, but the averages indicate strong performance.
At 2560x1440, the average frame rates are 277 FPS at Low, 220 FPS at Medium, 174 FPS at High, and 109 FPS at Ultra. The Medium preset shows a minimum of 187 FPS and a maximum of 253 FPS, indicating a tighter range than at 1080p. The drop from Low to Ultra is 168 FPS, representing a 61% reduction in frame rate.
At 3840x2160, the average frame rates are 145 FPS at Low, 115 FPS at Medium, 91 FPS at High, and 57 FPS at Ultra. The Medium preset records a minimum of 98 FPS and a maximum of 132 FPS. The difference between Low and Ultra is 88 FPS, a 61% reduction, which is consistent with the 1440p scaling. The 4K Medium results show that the combo can maintain frame rates above 60 FPS with moderate settings.
GPU Role
The NVIDIA GeForce GTX 1080 Ti is a Pascal architecture GPU with a base clock of 1481 MHz and a boost clock of 1582 MHz. It features 3584 shading units, 224 texture mapping units, and 88 raster output units, providing a texture rate of 354.4 GTexel/s and a pixel rate of 139.2 GPixel/s. The GPU’s 11 GB of GDDR5X memory operates at 11 Gbps effective on a 352-bit bus, delivering 484.4 GB/s of bandwidth.
In Minecraft, the GPU’s role becomes increasingly important as resolution and settings increase. At 1080p Low, the GPU can render frames at 440 FPS, but at 4K Ultra, it drops to 57 FPS, showing that the GPU’s shading and rasterization capabilities are the bottleneck. The GPU’s fp32 performance of 11.34 TFLOPS is sufficient for the game’s simple geometry but struggles with the higher pixel counts at 4K.
The GTX 1080 Ti’s percentileVsAllGpus of 58 places it in the 58th percentile of all GPUs, with an average benchmark score of 15548. Its nearest rivals include the AMD Radeon Pro W5500, which scores 0.8% higher, and the NVIDIA GeForce RTX 2060, which scores 1.7% lower. The GPU’s 16 nm process node and 11,800 million transistors contribute to its power, but it lacks modern features like ray tracing cores or tensor cores, which are not relevant for Minecraft’s default rendering. The GPU’s 250 W TDP and 600 W suggested PSU indicate a power-hungry design, but the data shows it delivers consistent performance across all tested presets.
Hardware Specifications
AMD Ryzen 5 7600
NVIDIA GeForce GTX 1080 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 7600 + NVIDIA GeForce GTX 1080 Ti in Minecraft
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 145.0 |
| 3840x2160 | Medium | 115.0 |
| 3840x2160 | High | 91.0 |
| 3840x2160 | Ultra | 57.0 |
| 2560x1440 | Low | 277.0 |
| 2560x1440 | Medium | 220.0 |
| 2560x1440 | High | 174.0 |
| 2560x1440 | Ultra | 109.0 |
| 1920x1080 | Low | 440.0 |
| 1920x1080 | Medium | 348.0 |
| 1920x1080 | High | 276.0 |
| 1920x1080 | Ultra | 173.0 |
Minecraft with Ryzen 5 7600 + Other GPUs
See how Minecraft performs with the same CPU but different graphics cards.
Minecraft with GTX 1080 Ti + Other CPUs
See how Minecraft performs with the same GPU but different processors.
Other Games with Ryzen 5 7600 + GTX 1080 Ti
Explore FPS benchmarks for other games using this same hardware combination.