Microsoft Flight Simulator

Microsoft Flight Simulator

AVERAGE FPS
66
good

This combination provides smooth gameplay with an average of 66 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 39 40 49 65
1440p QHD 50 54 69 91
1080p Full HD 61 64 90 114

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 65
3840x2160 Medium 49
3840x2160 High 40
3840x2160 Ultra 39
2560x1440 Low 91
2560x1440 Medium 69
2560x1440 High 54
2560x1440 Ultra 50
1920x1080 Low 114
1920x1080 Medium 90
1920x1080 High 64
1920x1080 Ultra 61

Microsoft Flight Simulator with Intel Core i5-9400 + NVIDIA GeForce GTX 1080 Ti, In-Depth Analysis

The Intel Core i5-9400 paired with the NVIDIA GeForce GTX 1080 Ti produces a mid-pack result in Microsoft Flight Simulator, landing at rank 1070 out of 1795 tested combos. This places the configuration in the 60th percentile of all combinations tested, a position that reflects a balanced but not exceptional partnership between a six-core CPU and a high-end Pascal GPU. The benchmark data reveals a system that can handle the simulation’s demands at 1080p and 1440p with playable frame rates, but struggles to maintain smooth performance at 4K Ultra settings.

CPU Role

The Intel Core i5-9400 is a six-core, six-thread processor based on the Coffee Lake architecture, built on a 14 nm process. It operates at a base clock of 2.90 GHz and can boost up to 4.10 GHz, with 9 MB of shared L3 cache. The CPU’s benchmark scores show a modest profile: it achieves 803 points in Cinebench R15 multi-core, 3346 in R20 multi-core, and 7969 in R23 multi-core. Single-core results are 113, 472, and 1125 across the same three tests. The processor’s average benchmark score is 2305, placing it at the 50th percentile of all CPUs tested.

In Microsoft Flight Simulator, the CPU’s role is significant because the game simulates complex flight physics, weather systems, and terrain data. The six threads of the i5-9400 are sufficient for the game’s core logic, but the data shows that at lower resolutions, the CPU becomes a limiting factor. When the resolution drops from 4K to 1080p, frame rates increase substantially, but not linearly with the reduction in pixel count. This suggests that the CPU cannot fully feed the GPU at lower resolutions, capping performance in scenarios where the GPU would otherwise be underutilized.

The nearest rivals to the i5-9400 in CPU benchmarks are the Intel Core i3-10305 and Core i3-1125G4, both with an average score of 2300, a delta of 0.2% from the i5-9400. The Xeon E-2134 scores 2295, a 0.4% delta, while the Core i7-8809G scores 2319, a -0.6% delta. These margins are negligible, meaning the i5-9400 performs essentially on par with these alternatives in synthetic tests. In the context of Flight Simulator, this parity suggests that swapping to any of these CPUs would produce very similar frame rates, with the limiting factor likely being the GPU at higher settings.

GPU Role

The NVIDIA GeForce GTX 1080 Ti is a Pascal architecture GPU with 11 GB of GDDR5X memory on a 352-bit bus, providing 484.4 GB/s of bandwidth. It runs at a base clock of 1481 MHz and a boost clock of 1582 MHz, with 3584 shading units, 224 texture mapping units, and 88 raster output units. The GPU’s compute capability is rated at 11.34 TFLOPS for FP32 operations, with a pixel rate of 139.2 GPixel/s and a texture rate of 354.4 GTexel/s. Its average benchmark score is 19402, placing it at the 61st percentile of all GPUs.

In Microsoft Flight Simulator, the GTX 1080 Ti’s large memory pool and high bandwidth are critical for streaming high-resolution textures. The 11 GB VRAM is ample for the game’s demands, even at 4K with Ultra settings, which explains why the GPU does not encounter memory bottlenecks in the measured data. The GPU’s benchmark rivals include the GeForce GTX 780 with a score of 19405 (0% delta from the 1080 Ti), the Radeon Pro 560X at 19426 (-0.1%), the Tesla K40m at 19519 (-0.6%), and the TITAN Xp at 19184 (1.1%). The GTX 1080 Ti is effectively equivalent to the GTX 780 in average score, an interesting result that suggests the older Kepler card performs similarly in synthetic workloads, though in real gaming the 1080 Ti would typically pull ahead.

The GPU’s role becomes more pronounced as resolution increases. At 1080p, the GTX 1080 Ti is often underutilized because the CPU cannot keep up, but at 1440p and 4K, the GPU becomes the dominant factor. The measured frame rates show a clear pattern: the GPU handles the load well until Ultra settings at 4K, where performance drops below 40 FPS.

Resolution Scaling

The measured FPS data shows a clear progression from 1080p to 4K, with frame rates dropping as pixel count increases. At 1080p with Low settings, the combo achieves 114.2 FPS, which drops to 90.3 FPS at Medium, 64.3 FPS at High, and 61.1 FPS at Ultra. Moving to 1440p, the Low setting produces 90.6 FPS, Medium 69.3 FPS, High 54.2 FPS, and Ultra 49.8 FPS. At 4K, the numbers fall further: Low yields 64.5 FPS, Medium 48.5 FPS, High 40.2 FPS, and Ultra 39.2 FPS.

The scaling from 1080p to 1440p shows a reduction of approximately 20-25% across settings, while the drop from 1440p to 4K is roughly 25-30%. This indicates that the GPU is the primary limiting component at higher resolutions, as the CPU’s workload does not increase with resolution. The fact that 4K Ultra produces 39.2 FPS, only slightly below 4K High at 40.2 FPS, suggests that the GPU is hitting a performance ceiling where additional settings changes have minimal impact. Conversely, at 1080p, the difference between Low and Ultra is 53 FPS, indicating that the CPU is the bottleneck at lower resolutions, as the GPU could handle more frames if the CPU could deliver them.

How This Combo Ranks

The combo ranks 1070 out of 1795 tested combinations in Microsoft Flight Simulator, which places it in the upper-middle tier of all tested systems. This rank is consistent with the hardware’s age and specifications: the i5-9400 is a mid-range CPU from 2018, while the GTX 1080 Ti was a flagship GPU from 2017. The combination of a six-core CPU with a high-end GPU is typical of a system built for 1440p gaming, and the data reflects that.

The rank of 1070 means that roughly 60% of tested combos perform better, while 40% perform worse. This is a solid result for a system with components that are several generations old. The combo’s position is likely influenced by the CPU’s performance ceiling at lower resolutions, as the GPU is capable of much higher frame rates than the CPU can provide. In synthetic benchmarks, the CPU sits at the 50th percentile and the GPU at the 61st percentile, so the combined rank is slightly below what the GPU alone would suggest, indicating the CPU is holding back overall performance.

Measured FPS Breakdown

At 1080p, the combo delivers its best performance. Low settings produce 114.2 FPS, which is smooth and well above the 60 FPS threshold for most displays. Medium settings drop to 90.3 FPS, still excellent. High settings yield 64.3 FPS, which is playable but shows a significant drop from Medium. Ultra settings reduce performance to 61.1 FPS, which is barely above 60 FPS and indicates that the CPU is limiting performance, as the GPU should be capable of higher frame rates at this resolution.

At 1440p, performance scales down consistently. Low settings produce 90.6 FPS, which is still very playable. Medium settings drop to 69.3 FPS, maintaining a smooth experience. High settings yield 54.2 FPS, which is below the 60 FPS target but still acceptable for a flight simulator. Ultra settings produce 49.8 FPS, which is playable but requires some compromise on smoothness.

At 4K, the combo struggles to maintain high frame rates. Low settings produce 64.5 FPS, which is playable. Medium settings drop to 48.5 FPS, and High settings produce 40.2 FPS. Ultra settings yield 39.2 FPS, which is below the 40 FPS mark and would be considered borderline for a smooth experience. The small difference between High and Ultra at 4K (40.2 vs 39.2 FPS) suggests the GPU is nearing its limits, and additional settings have diminishing returns.

The data shows that this combo is best suited for 1080p and 1440p gaming, where it can achieve high frame rates at most settings. At 4K, users would need to accept lower settings to maintain playable performance. The CPU’s limitations are most evident at 1080p, where the GPU is not fully utilized, while the GPU becomes the bottleneck at 4K Ultra. This combination represents a balanced system for 1440p gaming, with the caveat that the CPU is several years old and may limit performance in CPU-intensive scenarios.

Hardware Specifications

Intel Core i5-9400

Cores / Threads 6 / 6
Base Clock 2900 MHz
Boost Clock 4100 MHz
TDP 65W
Socket Intel Socket 1151
View Full CPU Details →

NVIDIA GeForce GTX 1080 Ti

VRAM 11 GB GDDR5X
Base Clock —
Boost Clock 1582 MHz MHz
TDP 250 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i5-9400 + NVIDIA GeForce GTX 1080 Ti in Microsoft Flight Simulator

Resolution Settings Avg FPS
3840x2160 Low 64.5
3840x2160 Medium 48.5
3840x2160 High 40.2
3840x2160 Ultra 39.2
2560x1440 Low 90.6
2560x1440 Medium 69.3
2560x1440 High 54.2
2560x1440 Ultra 49.8
1920x1080 Low 114.2
1920x1080 Medium 90.3
1920x1080 High 64.3
1920x1080 Ultra 61.1

Microsoft Flight Simulator with ii5-9400 + Other GPUs

See how Microsoft Flight Simulator performs with the same CPU but different graphics cards.

Other Games with ii5-9400 + GTX 1080 Ti

Explore FPS benchmarks for other games using this same hardware combination.