Lockdown Protocol

The AMD Ryzen 7 9700F paired with the NVIDIA GeForce RTX 3070 Ti delivers a performance profile in Lockdown Protocol that scales predictably with resolution and settings. The measured data indicates a system that is highly capable at 1080p, solid at 1440p, and still playable at 4K, though the demands of higher resolutions and ultra presets quickly expose the limits of the graphics card. This analysis breaks down the measured frames per second (FPS) across all nine tested configurations.

Resolution Scaling

The transition from 1920x1080 to 3840x2160 has a profound impact on frame rates, revealing a clear GPU-bound scenario at higher resolutions. At the High settings preset, the average FPS drops from 139 at 1080p to 102 at 1440p, a 26.6% reduction, before falling further to 66 at 4K, which represents a 52.5% decrease from the 1080p baseline. This steep decline indicates that the rendering load is scaling heavily with pixel count, which is typical for a game that relies on fill-rate and memory bandwidth.

The scaling pattern becomes even more pronounced when examining the Low preset. Here, the system achieves 225 FPS at 1080p, which drops to 165 FPS at 1440p (a 26.7% decrease) and then to 106 FPS at 4K (a 52.9% decrease from 1080p). The consistency of the percentage drops between the High and Low presets suggests that the resolution scaling is not being significantly mitigated by the CPU, meaning the Ryzen 7 9700F is keeping pace with the GPU's demands even at lower settings where draw calls might become a factor.

Looking at the Medium preset data, which includes minimum and maximum FPS figures, we see a similar trend. At 1080p, the average is 160 FPS with a minimum of 136 FPS. At 1440p, the average drops to 117 FPS (a 26.9% decline) with a minimum of 99 FPS. At 4K, the average falls to 76 FPS (a 52.5% decline) with a minimum of 64 FPS. The consistency of the average FPS drop between 1080p and 4K across all three presets (52.5%, 52.9%, and 52.5%) points directly to the GPU as the primary limiting component.

The data strongly suggests that the RTX 3070 Ti is the bottleneck at 1440p and 4K. The nearly identical percentage losses in performance when increasing resolution, regardless of the graphical preset, confirm that the CPU is not the constraining factor in these scenarios. At 1080p, the high frame rates, particularly the 225 FPS on Low, suggest the system is still GPU-limited, but the headroom is substantial, indicating that the CPU could potentially drive even higher frame rates if the GPU were more powerful.

GPU Role

The NVIDIA GeForce RTX 3070 Ti is characterized by its 8 GB of GDDR6X memory on a 256-bit bus, providing a bandwidth of 608.3 GB/s. This memory configuration is a critical factor in the game's performance at higher resolutions. The transition from 1440p to 4K shows a significant performance penalty, which is consistent with the increased memory pressure and bandwidth demands of rendering at 3840x2160. The 8 GB frame buffer is likely a contributing factor to the substantial FPS drops seen at 4K, especially on the Ultra preset where the average falls to 49 FPS.

The GPU's clock speeds are listed with a base of 1575 MHz and a boost of 1770 MHz. These clocks, combined with the 6144 shading units, allow the card to produce a texture rate of 339.8 GTexel/s and a pixel rate of 169.9 GPixel/s. These specifications directly influence the card's ability to handle the pixel and texture processing demands of Lockdown Protocol at different resolutions. The measured FPS at 1080p, where the card achieves 139 FPS on High, demonstrates that its raw compute power is sufficient for high-refresh-rate gaming at that resolution.

The RTX 3070 Ti's performance in synthetic benchmarks places it in the 75th percentile of all GPUs, with an average benchmark score of 29945. Its nearest rivals in that metric include the NVIDIA GeForce RTX 5070 Mobile, which scores 0.1% higher, and the AMD Radeon RX 6800, which scores 0.5% higher. This context suggests that while the card is not a top-tier performer in 2025, it remains a capable mid-to-high-range option. The in-game data for Lockdown Protocol confirms this, as the card is able to deliver smooth frame rates at 1080p and 1440p but struggles to maintain high FPS at 4K with the most demanding settings.

Settings Recommendations

The measured FPS rows provide clear guidance on the optimal settings for different priorities. For players targeting the highest possible frame rates at 1080p, the Low preset delivers an average of 225 FPS, which is ideal for competitive play on high-refresh-rate monitors. The Medium preset also offers a very high average of 160 FPS, with a minimum of 136 FPS, which provides a better visual experience while still maintaining excellent fluidity. The High preset at 1080p, with an average of 139 FPS, is also a viable option for a balanced experience.

At 1440p, the Medium preset emerges as the recommended choice for a smooth and visually appealing experience. It achieves an average of 117 FPS with a minimum of 99 FPS, which ensures consistent performance. The High preset at 1440p, averaging 102 FPS, is also playable and offers superior graphics, but the Medium preset provides a safer margin above the 60 FPS threshold. The Low preset at 1440p, with an average of 165 FPS, is again the choice for maximum performance, but it sacrifices visual fidelity.

For 4K gaming, the data suggests that the High preset is the most reasonable choice for a playable experience, with an average of 66 FPS. The Medium preset also achieves a playable average of 76 FPS, but it has a minimum FPS of 64, which could be noticeable in demanding scenes. The Ultra preset is not advisable for 4K, as its average of 49 FPS falls below the 60 FPS target for smooth gameplay. The Low preset at 4K, while achieving an average of 106 FPS, is a significant visual downgrade that most users would likely want to avoid on a high-resolution display.

Measured FPS Breakdown

The complete set of measured FPS data for the AMD Ryzen 7 9700F and NVIDIA GeForce RTX 3070 Ti combination in Lockdown Protocol is as follows:

At 1920x1080, the system produces an average of 225 FPS on Low, 160 FPS on Medium (with a minimum of 136 FPS and maximum of 184 FPS), 139 FPS on High, and 105 FPS on Ultra. The spread from Low to Ultra is 120 FPS, demonstrating a wide range of performance scaling.

At 2560x1440, the averages are 165 FPS on Low, 117 FPS on Medium (minimum 99 FPS, maximum 135 FPS), 102 FPS on High, and 77 FPS on Ultra. The gap between Low and Ultra narrows to 88 FPS, indicating that the GPU is becoming more of a limiting factor at this resolution.

At 3840x2160, the averages are 106 FPS on Low, 76 FPS on Medium (minimum 64 FPS, maximum 87 FPS), 66 FPS on High, and 49 FPS on Ultra. The difference between Low and Ultra is only 57 FPS, and the Ultra preset is the only configuration that fails to reach an average of 60 FPS. The minimum FPS of 64 on the Medium preset at 4K suggests that even this setting can experience occasional dips below the standard 60 FPS target.

FAQ

Q: What is the best resolution for this CPU and GPU combo in Lockdown Protocol?

A: The data shows that 2560x1440 on the Medium or High preset offers an excellent balance, with averages of 117 FPS and 102 FPS respectively. 1920x1080 is better for maximum frame rates, and 3840x2160 is playable but with a narrower margin for error.

Q: Can this system handle 4K gaming in Lockdown Protocol?

A: Yes, it can. The High preset at 3840x2160 achieves an average of 66 FPS, and the Medium preset achieves an average of 76 FPS. However, the Ultra preset is not recommended, as its average of 49 FPS is below the 60 FPS threshold typically desired for smooth gameplay.

Q: How does the RTX 3070 Ti compare to its nearest rivals in synthetic benchmarks?

A: The GPU's average benchmark score of 29945 is 0.1% lower than the NVIDIA GeForce RTX 5070 Mobile's score of 29928 and 0.5% lower than the AMD Radeon RX 6800's score of 30095. It scores 0.5% higher than the NVIDIA GeForce RTX 2080 Ti's score of 29783.

Q: Is the Ryzen 7 9700F a bottleneck for the RTX 3070 Ti in this game?

A: The data indicates that the CPU is not the primary bottleneck. The consistent percentage drops in FPS when moving from 1080p to 4K across all presets (around 52.5%) point to the GPU as the limiting factor at higher resolutions.

Q: What is the performance difference between the Low and Ultra presets at 1080p?

A: At 1920x1080, the Low preset averages 225 FPS, while the Ultra preset averages 105 FPS. This represents a 120 FPS difference, or a 53.3% performance increase for the Low preset over Ultra.

Q: What is the minimum FPS recorded for the Medium preset at various resolutions?

A: For the Medium preset, the minimum FPS values are 136 at 1920x1080, 99 at 2560x1440, and 64 at 3840x2160. This data shows that frame time consistency decreases as resolution increases.

CPU Role

The AMD Ryzen 7 9700F is an 8-core, 16-thread processor based on the Zen 5 architecture, with a base clock of 3.80 GHz and a boost clock of 5.50 GHz. It features 32 MB of shared L3 cache and has a TDP of 65 W. In the context of Lockdown Protocol, this CPU provides the computational foundation for the system, handling game logic, physics, and draw calls. The high boost clock of 5.50 GHz is particularly beneficial for gaming, as it ensures strong single-threaded performance, which is often critical in FPS titles.

The CPU's synthetic benchmark scores place it in the 94th percentile of all CPUs, with an average benchmark score of 69996. Its nearest rivals include the AMD Ryzen 9 7940HX, which it outperforms by 0.2%, and the Intel Core i7-14700KF, which outperforms it by 0.2%. The data from Lockdown Protocol suggests that the CPU's capabilities are more than sufficient to feed the RTX 3070 Ti at 1080p, as evidenced by the 225 FPS average on the Low preset. This high frame rate indicates that the CPU is not limiting the system's performance in this scenario.

The performance scaling data further supports this conclusion. The fact that the percentage decrease in FPS from 1080p to 4K is nearly identical for the Low, Medium, and High presets (52.9%, 52.5%, and 52.5% respectively) strongly suggests that the CPU's workload is not increasing proportionally with resolution, while the GPU's is. If the CPU were a bottleneck, we would expect to see a smaller performance drop at higher resolutions, as the CPU would not be able to push more frames regardless of the GPU's load. The consistent drop indicates a purely GPU-bound scenario at higher resolutions.

How This Combo Ranks

Within the benchmark database, the combination of the AMD Ryzen 7 9700F and NVIDIA GeForce RTX 3070 Ti ranks 969th out of 2828 tested combos for Lockdown Protocol. This places the system in the 65.7th percentile of all tested configurations, indicating that it performs better than the majority of systems tested. The ranking reflects the strong performance of the CPU and the mid-to-high range capability of the GPU.

The high rank is supported by the measured FPS data, which shows that the system can achieve very high frame rates at 1080p and solid performance at 1440p. The fact that it ranks in the top 35% of all combos, despite the RTX 3070 Ti being an older generation card, highlights the efficiency of the Ryzen 7 9700F. The CPU's ability to avoid becoming a bottleneck at lower resolutions allows the GPU to perform to its full potential, resulting in a strong overall ranking. The system's performance at 4K, while not top-tier, is still respectable, further contributing to its position above the median.