Lockdown Protocol

# Lockdown Protocol with AMD Ryzen 7 5800X3D + NVIDIA GeForce RTX 3070 Ti

The AMD Ryzen 7 5800X3D (8 cores, 16 threads, base 3.40 GHz, boost 4.50 GHz, 96 MB shared L3 cache) paired with the NVIDIA GeForce RTX 3070 Ti (8 GB GDDR6X, 256-bit bus, 608.3 GB/s bandwidth, 6144 shading units, boost 1770 MHz) produces a measured performance profile in Lockdown Protocol that tells a clear story about where the bottleneck shifts as resolution climbs. With 12 measured FPS data points spanning three resolutions and four quality presets, this combination ranks 1324th out of 3714 tested combos in this game, placing it in the upper-middle tier of systems. The data reveals a system that delivers high refresh rates at 1080p, remains very playable at 1440p, and starts to show GPU strain at 4K Ultra settings.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and becomes progressively more punishing as settings increase. At Low settings, the average frame rate falls from 225 FPS at 1920x1080 to 165 FPS at 2560x1440 (a 26.7% reduction) and then to 106 FPS at 3840x2160 (a 35.8% further reduction). This pattern — where the 1440p-to-4K drop is larger than the 1080p-to-1440p drop — indicates that the RTX 3070 Ti begins to hit its pixel-pushing limits as resolution scales, while the CPU still has headroom to spare.

At High settings, the scaling curve steepens further: 139 FPS at 1080p, 102 FPS at 1440p (down 26.6%), and 66 FPS at 4K (down 35.3%). The Medium preset shows a similar trajectory: 160 FPS at 1080p, 117 FPS at 1440p (down 26.9%), and 76 FPS at 4K (down 35.0%). Ultra settings produce the most dramatic degradation: 105 FPS at 1080p, 77 FPS at 1440p (down 26.7%), and just 49 FPS at 4K (down 36.4%).

The consistency of these percentage drops across all four quality presets is striking. Each step from 1080p to 1440p costs roughly 27% of performance, and each step from 1440p to 4K costs roughly 35%. This uniformity suggests that resolution scaling is governed primarily by the GPU's fill rate and memory bandwidth rather than by any CPU-side constraint. The RTX 3070 Ti's 608.3 GB/s memory bandwidth and 169.9 GPixel/s pixel rate are the limiting factors at higher resolutions, as the 8 GB VRAM capacity does not appear to cause a cliff-edge drop in any tested configuration.

How This Combo Ranks

The combination of the Ryzen 7 5800X3D and RTX 3070 Ti achieves a combo rank of 1324 out of 3714 tested combos in Lockdown Protocol, placing it in the 64th percentile of systems tested for this game. This is a solid mid-to-upper tier result, but not an elite one — the data suggests that many combinations with newer or higher-tier GPUs outperform this pairing in this specific title.

Contextualizing the individual components helps explain this ranking. The CPU sits in the 80th percentile against all CPUs, with an average benchmark score of 27896. Its nearest rivals in aggregate benchmark scores are the AMD Ryzen 7 6800U (27887, 0% delta), the Intel Core i9-10900K (27872, 0.1% delta), the AMD Ryzen AI 5 PRO 340 (27932, -0.1% delta), and the Intel Core i5-12600KF (27799, 0.3% delta). This clustering shows the 5800X3D is competitive with a wide range of processors, but none of these rivals are dramatically faster or slower in general compute.

The GPU ranks in the 75th percentile against all GPUs, with an average benchmark score of 29945. Its nearest rivals include the NVIDIA GeForce RTX 5070 Mobile (29928, 0.1% delta), the AMD Radeon RX 6800 (30095, -0.5% delta), the NVIDIA GeForce RTX 2080 Ti (29783, 0.5% delta), and the AMD Radeon RX 6700 (30433, -1.6% delta). The RTX 3070 Ti essentially trades blows with these cards in synthetic benchmarks, yet the in-game combo rank of 1324/3714 indicates that Lockdown Protocol's specific workload favors certain architectures or feature sets more than others.

CPU Role

The Ryzen 7 5800X3D brings 8 physical cores and 16 threads to this pairing, built on the Zen 3 architecture (Vermeer codename) using a 7 nm process from TSMC. Its base clock of 3.40 GHz and boost clock of 4.50 GHz, combined with a substantial 96 MB shared L3 cache, make it well-suited for gaming workloads that benefit from large, fast caches.

In synthetic benchmarks, the CPU delivers strong multi-threaded results: a Cinebench R23 multicore score of 14317 and a single-core score of 1452, a Geekbench multicore score of 11765 with a single-core score of 2017, and a 3DMark 16-thread score of 7299. The PassMark multithread score of 28309 and single-thread score of 3234 further confirm balanced performance across both lightly and heavily threaded workloads.

For Lockdown Protocol specifically, the FPS data suggests the CPU is rarely the limiting factor. At 1080p Low settings, the system achieves 225 FPS average, which is far above what most displays can show. Even at 1080p Ultra, the 105 FPS average indicates the GPU is still the primary constraint, as the CPU's 8 cores and 16 threads can feed frames faster than the RTX 3070 Ti can render them at higher settings. The 3DMark 2-thread score of 1746 and 4-thread score of 3392 show that the CPU handles lightly threaded game logic well, while the 8-thread score of 5906 and max-thread score of 7285 demonstrate that it scales effectively when the game uses more cores.

The CPU's percentile ranking of 80 against all CPUs, with an average benchmark score of 27896, places it above most desktop processors. Its nearest rival, the Intel Core i9-10900K, scores 27872 — a 0.1% delta that puts them statistically at parity. This means the 5800X3D is not holding back the RTX 3070 Ti in any meaningful way in this game; rather, the GPU's performance ceiling defines the system's overall capability.

Measured FPS Breakdown

At 1920x1080, the system delivers its highest frame rates across all presets. Low settings produce an average of 225 FPS, Medium yields 160 FPS (with a minimum of 136 and maximum of 184), High achieves 139 FPS, and Ultra drops to 105 FPS. The spread from Low to Ultra is 120 FPS, showing that quality settings have a massive impact at this resolution.

Moving to 2560x1440, the averages decrease substantially. Low settings deliver 165 FPS, Medium produces 117 FPS (minimum 99, maximum 135), High achieves 102 FPS, and Ultra falls to 77 FPS. The spread from Low to Ultra is now 88 FPS, indicating that the GPU's workload is becoming more uniform across settings as resolution increases.

At 3840x2160, the system struggles with the highest presets. Low settings still manage 106 FPS, Medium averages 76 FPS (minimum 64, maximum 87), High drops to 66 FPS, and Ultra bottoms out at 49 FPS. The spread from Low to Ultra narrows to 57 FPS, which signals that at 4K, even Low settings are heavily GPU-bound.

The Medium preset is the only one with recorded minimum and maximum FPS values across all three resolutions. At 1080p Medium, the range is 136-184 FPS; at 1440p Medium, it is 99-135 FPS; and at 4K Medium, it is 64-87 FPS. These ranges show that frame pacing remains consistent relative to the average, with the minimum typically sitting about 15% below the average and the maximum about 15% above it.

FAQ

Q: Can this system achieve 144 FPS at 1440p in Lockdown Protocol?

A: No. At 2560x1440, the highest measured average is 165 FPS on Low settings, but Medium drops to 117 FPS, High to 102 FPS, and Ultra to 77 FPS. To sustain 144 FPS, you would need to use Low settings, which do not reach that threshold in the measured data.

Q: Is 4K gaming viable with this combination?

A: Yes, but with compromises. At 3840x2160, Low settings average 106 FPS and Medium averages 76 FPS, both playable. High settings average 66 FPS, which is acceptable for many players, but Ultra drops to 49 FPS, which may feel sluggish in a fast-paced FPS.

Q: How does the RTX 3070 Ti compare to its closest GPU rivals in aggregate benchmarks?

A: The RTX 3070 Ti scores 29945 on average. The NVIDIA GeForce RTX 5070 Mobile scores 29928 (0.1% delta), the AMD Radeon RX 6800 scores 30095 (-0.5% delta), the NVIDIA GeForce RTX 2080 Ti scores 29783 (0.5% delta), and the AMD Radeon RX 6700 scores 30433 (-1.6% delta). All are within 2% of each other.

Q: What is the performance gap between 1080p and 4K at the same settings?

A: At Low settings, FPS drops from 225 at 1080p to 106 at 4K, a 52.9% reduction. At Medium, it drops from 160 to 76, a 52.5% reduction. At High, it drops from 139 to 66, a 52.5% reduction. At Ultra, it drops from 105 to 49, a 53.3% reduction. The percentage drop is remarkably consistent at roughly half the performance lost.

Q: Does the Ryzen 7 5800X3D bottleneck the RTX 3070 Ti in this game?

A: The data suggests no. At 1080p Low, the system averages 225 FPS, indicating the CPU can feed frames well above typical display refresh rates. The CPU's 80th percentile ranking and its parity with the Intel Core i9-10900K (0.1% delta) further support that it is not the limiting factor.

Q: Is the 8 GB VRAM on the RTX 3070 Ti sufficient for Lockdown Protocol?

A: Based on the measured results, yes. There is no evidence of a VRAM capacity cliff at any resolution or setting. The FPS drops from 1080p to 4K are consistent across all presets, which would not be the case if VRAM overflow caused sudden performance collapses at higher resolutions.

Settings Recommendations

For players prioritizing high refresh rates at 1080p, Low settings provide the highest measured average of 225 FPS, but Medium at 160 FPS offers a better balance of visual quality and speed. The 136 FPS minimum at Medium ensures that frame drops remain manageable. At 1080p, High settings at 139 FPS are also viable for competitive play, while Ultra at 105 FPS is best reserved for those who value image quality over raw speed.

At 1440p, the choice becomes more constrained. Low settings deliver 165 FPS for maximum smoothness, but Medium at 117 FPS (minimum 99) is the sweet spot for most players, offering good visuals without dropping below 100 FPS. High at 102 FPS is acceptable, but Ultra at 77 FPS may feel inconsistent for fast-paced gameplay.

For 4K, Low settings at 106 FPS are the only preset that clears 100 FPS. Medium at 76 FPS (minimum 64) is playable, but High at 66 FPS and Ultra at 49 FPS are best avoided for competitive play. The data suggests that 4K Ultra is only suitable for slower-paced modes or screenshot purposes.

Overall, the best experience per the measured rows depends on the target resolution. At 1080p, Medium provides the best combination of quality and performance. At 1440p, Medium is again the recommended preset, as it keeps the average above 115 FPS while offering substantial visual improvements over Low. At 4K, Low is the only preset that maintains a comfortable frame rate, making it the default choice for 4K gaming with this hardware.

GPU Role

The NVIDIA GeForce RTX 3070 Ti is the primary performance driver in this pairing, and its characteristics explain the FPS patterns observed across resolutions and settings. Built on the Ampere architecture (GA104 chip) using an 8 nm Samsung process, the GPU packs 6144 shading units, 192 TMUs, and 96 ROPs, along with 48 RT cores and 192 tensor cores. Its boost clock of 1770 MHz and base clock of 1575 MHz, combined with 8 GB of GDDR6X memory on a 256-bit bus, deliver 608.3 GB/s of memory bandwidth.

The GPU's synthetic benchmark results confirm its mid-to-high tier positioning. It scores 23356 in PassMark G3D, 11601 in PassMark GPU compute, 3478 in 3DMark Steel Nomad DX12, 119718 in Geekbench OpenCL, and 139541 in Geekbench Vulkan. The PassMark DirectX scores are notably lower — 192 for DirectX 11 and 91 for DirectX 12 — but these are likely workload-specific measures rather than representative of real-world gaming performance.

The GPU's 75th percentile ranking against all GPUs, with an average benchmark score of 29945, places it in a tight cluster with its nearest rivals. The fact that the RTX 5070 Mobile scores within 0.1% and the RX 6800 within 0.5% indicates that the RTX 3070 Ti is well-matched against both newer and older competitor products.

In Lockdown Protocol, the GPU's role becomes increasingly dominant as resolution rises. The consistent ~27% FPS drop from 1080p to 1440p and ~35% drop from 1440p to 4K across all settings points to a GPU that is fill-rate and bandwidth limited at higher pixel counts. The 169.9 GPixel/s pixel rate and 339.8 GTexel/s texture rate are the hardware specifications most likely to constrain performance in this scenario, as the game appears to scale with pixel throughput rather than being limited by the CPU or memory capacity.

The RTX 3070 Ti's FP32 performance of 21.75 TFLOPS and FP16 of 21.75 TFLOPS (1:1) suggest strong compute capability, but the measured FPS data indicates that Lockdown Protocol does not heavily leverage these capabilities. Instead, the game's performance profile aligns with a traditional rasterization workload where raw pixel fill and memory bandwidth dominate. The 8 GB VRAM, while sufficient per the measured data, sits at the edge of what future titles might demand, but for this game, it poses no measurable limitation.