Lockdown Protocol

# Lockdown Protocol with AMD Ryzen 7 5700G + NVIDIA GeForce GTX 1070

The AMD Ryzen 7 5700G paired with the NVIDIA GeForce GTX 1070 delivers a playable but resolution-sensitive experience in Lockdown Protocol, a 2024 FPS title. This combination ranks 1407th out of 1637 tested combos, placing it in the lower tier of configurations. The data reveals a system where the GPU becomes the clear limiting factor as resolution climbs, while the 8-core processor provides ample headroom for the game's demands. The measured FPS range from 31.7 at 4K Ultra to 129.4 at 1080p Low tells a story of a setup that rewards settings tuning and resolution choices.

Resolution Scaling

The FPS drop from 1080p to 4K is stark and reveals a GPU-bound workload. At High settings, the average frame rate falls from 82.3 FPS at 1920x1080 to 56.7 FPS at 2560x1440, a decrease of 25.6 FPS, and then further down to 35.6 FPS at 3840x2160. That is a 56.7% reduction in frame rate from 1080p to 4K for the same settings tier. The pattern holds across all settings: Low goes from 129.4 FPS at 1080p to 93.5 at 1440p and 64.9 at 4K, while Ultra drops from 59.7 FPS at 1080p to 42.3 at 1440p and 31.7 at 4K. The scaling is nearly linear with pixel count, which strongly suggests the GTX 1070's pixel throughput is the bottleneck. The 1070's 64 ROPs and 107.7 GPixel/s pixel rate are being saturated at higher resolutions, while the CPU's role diminishes. At 1080p Low, the 129.4 FPS result approaches what the Ryzen 7 5700G can feed, but the GPU still governs overall performance. The data implies that 4K gaming is only viable at Low settings (64.9 FPS), and even then, the experience is far from the 1440p or 1080p smoothness.

GPU Role

The NVIDIA GeForce GTX 1070, with its 8 GB of GDDR5 memory on a 256-bit bus, provides 256.3 GB/s of bandwidth. This memory configuration is sufficient for Lockdown Protocol's demands at most settings, but the architecture shows its age. The GPU's 1920 shading units and 120 TMUs deliver 6.463 TFLOPS of FP32 performance, which translates to the measured frame rates. The boost clock of 1683 MHz is the standard reference figure, and the data indicates that the card operates within its expected envelope. Comparing to nearest rivals, the GTX 1070's average benchmark score of 12331 places it just 0.7% ahead of the NVIDIA Quadro K4200 (12241) and 1.4% behind the GeForce GTX 1650 SUPER (12504). This tight grouping suggests that Lockdown Protocol's performance is consistent with the card's general compute capabilities. The 8 GB VRAM is not the limiting factor in these tests; the frame rate drops across resolutions are more consistent with raw shading and ROP throughput limits than memory capacity exhaustion. The 1070's 51st percentile ranking among all GPUs places it squarely in the mid-range, and the measured FPS reflect that positioning.

CPU Role

The AMD Ryzen 7 5700G is an 8-core, 16-thread processor based on Zen 3 architecture, running at a base clock of 3.80 GHz and a boost clock of 4.60 GHz. Its 16 MB of L3 cache and dual-channel DDR4 memory support provide solid fundamentals for gaming. In synthetic benchmarks, it scores 20755 in Cinebench R23 multi-core and 2930 in single-core, which are respectable numbers. The CPU's percentile rank of 83rd among all CPUs indicates it sits in the upper tier of processors. In Lockdown Protocol, the CPU's role is largely to feed the GPU with draw calls and game logic. At 1080p Low, the 129.4 FPS result is likely near the CPU's practical limit for this title, as the GPU is not heavily taxed at those settings. However, the data shows that the frame rate scales down smoothly with resolution, which means the CPU is not introducing a bottleneck at higher resolutions. The nearest rivals for the 5700G include the AMD Ryzen 7 6800U (0.3% slower) and Intel Xeon D-2752TER (0.4% slower), showing that its performance is competitive with modern mobile and server parts. The 5700G's 16 threads are more than enough for a 2024 FPS title, and the data suggests that the CPU is not the constraint in this pairing.

Settings Recommendations

The measured FPS rows provide a clear hierarchy of settings for each resolution. At 1920x1080, Low settings deliver 129.4 FPS, Medium 90.6 FPS, High 82.3 FPS, and Ultra 59.7 FPS. The jump from Low to Medium costs 38.8 FPS, while the jump from High to Ultra costs 22.6 FPS. For competitive play at 1080p, Low settings offer the highest headroom, but Medium at 90.6 FPS is a balanced choice for visual quality and responsiveness. High at 82.3 FPS is also viable for most players. At 2560x1440, Low delivers 93.5 FPS, Medium 69.7 FPS, High 56.7 FPS, and Ultra 42.3 FPS. The 1440p Medium setting is the sweet spot, providing nearly 70 FPS while maintaining decent visuals. At 3840x2160, only Low (64.9 FPS) reaches playable territory; Medium (42.6 FPS) and High (35.6 FPS) are marginal, and Ultra (31.7 FPS) is below the threshold for smooth gameplay. The data indicates that for a consistent 60+ FPS experience, players should use Low at 4K, Medium at 1440p, and can comfortably use High or Ultra at 1080p.

How This Combo Ranks

This combination ranks 1407th out of 1637 tested combos in Lockdown Protocol, placing it in the 14th percentile of all tested systems. This rank is a function of the GTX 1070's mid-range standing and the 5700G's strong CPU performance. The GPU's 51st percentile rank among all GPUs is the primary driver of this low combo ranking, as the CPU's 83rd percentile rank is comparatively high. The data suggests that the combo is limited by the GPU, and upgrading the graphics card would yield significantly better results. The measured FPS at 1080p High (82.3 FPS) is respectable, but the rank reflects that many other combinations achieve far higher frame rates. The GTX 1070's nearest rivals, such as the GTX 1650 SUPER (1.4% faster in average score), would likely produce similar combo rankings, indicating that this tier of GPU is the bottleneck for modern FPS titles at higher resolutions. The 5700G's integrated Radeon Vega 8 graphics are not used in this configuration, so the standalone GPU is entirely responsible for the rendering output.

FAQ

Q: What is the best resolution for this combo in Lockdown Protocol?

A: The data shows 1920x1080 is the best resolution, with Low settings delivering 129.4 FPS and High settings achieving 82.3 FPS. At 2560x1440, only Low (93.5 FPS) and Medium (69.7 FPS) provide smooth gameplay.

Q: Can this system handle 4K gaming in Lockdown Protocol?

A: Only at Low settings, which yields 64.9 FPS. Medium (42.6 FPS), High (35.6 FPS), and Ultra (31.7 FPS) all fall below 60 FPS, making them less desirable for fast-paced FPS play.

Q: How does the GTX 1070 compare to its nearest rivals in general benchmarks?

A: The GTX 1070's average benchmark score is 12331, which is 0.7% higher than the Quadro K4200 (12241) and 1.4% lower than the GTX 1650 SUPER (12504). The performance is closely clustered among these mid-range GPUs.

Q: Is the Ryzen 7 5700G a bottleneck for the GTX 1070?

A: No, the data indicates the CPU is not the limiting factor. At 1080p Low, the system reaches 129.4 FPS, which is near the CPU's practical limit, but at higher resolutions, the GPU becomes the clear constraint.

Q: What settings should I use for the most balanced experience at 1440p?

A: Medium settings at 2560x1440 deliver 69.7 FPS, which is the best balance of visual quality and smoothness. Low settings reach 93.5 FPS but sacrifice visual fidelity, while High drops to 56.7 FPS.

Q: How does this combo rank among all tested systems?

A: It ranks 1407th out of 1637 total combos in Lockdown Protocol. This is a low ranking, driven primarily by the GPU's mid-range performance, while the CPU ranks in the 83rd percentile among all processors.

Measured FPS Breakdown

The measured data covers three resolutions and four settings tiers. At 1920x1080, the average FPS values are 129.4 (Low), 90.6 (Medium), 82.3 (High), and 59.7 (Ultra). Moving to 2560x1440, the averages are 93.5 (Low), 69.7 (Medium), 56.7 (High), and 42.3 (Ultra). At 3840x2160, the averages are 64.9 (Low), 42.6 (Medium), 35.6 (High), and 31.7 (Ultra). The delta between Low and Ultra at each resolution is 69.7 FPS at 1080p, 51.2 FPS at 1440p, and 33.2 FPS at 4K. This narrowing delta at higher resolutions indicates that the GPU's pixel throughput limits the impact of settings changes. The largest absolute FPS jump between settings is from Low to Medium at 1080p (38.8 FPS difference), while the smallest is from High to Ultra at 4K (3.9 FPS difference). These numbers quantify the GPU's diminishing returns at higher resolutions and settings. The 129.4 FPS at 1080p Low represents the ceiling for this combo, while the 31.7 FPS at 4K Ultra represents the floor. The data shows a consistent pattern: the GTX 1070 provides playable frame rates up to 1440p with settings tuning, but 4K requires significant compromises.