Lockdown Protocol

The data for Lockdown Protocol shows a system pairing the AMD Ryzen 5 8400F with the NVIDIA GeForce RTX 5060. This combination delivers a wide range of frame rates depending on resolution and quality settings, with the measured results revealing a clear performance hierarchy. The following analysis breaks down how this combo scales across resolutions, answers common questions, and examines the distinct roles of the CPU and GPU in this specific title.

Resolution Scaling

The performance trajectory from 1080p to 4K is steep and tells a classic story of GPU-bound scaling. At 1920x1080 with Low settings, the combo achieves 202.1 FPS, which is a strong baseline. Moving to 2560x1440 at Low drops that to 146 FPS, a reduction of roughly 27.8%. At 4K with Low settings, the average is 95.4 FPS, which is about 52.8% lower than the 1080p Low figure. This pattern is consistent across all quality presets, confirming that the RTX 5060's rendering load increases dramatically as pixel count rises.

The High preset shows a similar curve: 126.4 FPS at 1080p, 93.9 FPS at 1440p, and 62.1 FPS at 4K. The drop from 1080p to 4K here is 50.9%, nearly identical to the Low preset's scaling. Medium settings follow suit with 139.4 FPS at 1080p, 104.9 FPS at 1440p, and 64.4 FPS at 4K. The Ultra preset is the most demanding, starting at 93 FPS for 1080p, falling to 65.7 FPS at 1440p, and bottoming out at 44.9 FPS at 4K.

These numbers indicate that the limiting component at lower resolutions is not the GPU, but at 4K it clearly becomes the bottleneck. The fact that 1080p Low yields over 200 FPS while 4K Ultra yields under 45 FPS shows a performance span of more than 4.5x. The scaling between 1440p and 4K is particularly aggressive, with the RTX 5060 struggling to maintain playable frame rates at the highest resolution on the most demanding settings. The data suggests that for a smooth experience, users should target 1440p or 1080p, as the 4K results at Medium and High are borderline, while Ultra is likely too demanding for consistent play.

FAQ

Q: What is the best resolution for this combo in Lockdown Protocol?

A: Based on the data, 2560x1440 with High settings provides a good balance, yielding 93.9 FPS. At 1080p with High settings, the combo reaches 126.4 FPS, offering a higher refresh rate experience. For maximum frame rates, 1080p Low hits 202.1 FPS.

Q: How does the RTX 5060 handle 4K gaming in this title?

A: The RTX 5060 produces 62.1 FPS at 4K High and 64.4 FPS at 4K Medium. At 4K Ultra, the average drops to 44.9 FPS. These results suggest that 4K is playable at lower presets, but Ultra settings will likely cause noticeable stutter.

Q: Is the CPU a bottleneck at any resolution?

A: The data shows that at 1080p Low, the frame rate reaches 202.1 FPS, which is likely near the CPU's limit for this title. However, at higher resolutions like 4K, the GPU becomes the primary limiting factor, as shown by the steep drop in FPS.

Q: What is the performance difference between Low and Ultra settings at 1080p?

A: The difference is substantial. Low settings produce 202.1 FPS, while Ultra produces 93 FPS. This represents a 109.1 FPS gap, meaning Ultra settings nearly halve the frame rate compared to Low.

Q: How does this combo rank against other tested configurations?

A: The combo ranks 811 out of 1637 tested combinations in Lockdown Protocol. This places it in the middle percentile of all tested systems, indicating it is neither a top-tier nor a low-end configuration for this game.

Q: Does the RTX 5060's VRAM capacity affect results?

A: The RTX 5060 has 8 GB of GDDR7 memory. The data shows a significant drop in frame rates at 4K with higher settings, which could be related to memory capacity, but the exact cause is not specified in the benchmark results.

CPU Role

The AMD Ryzen 5 8400F is a 6-core, 12-thread processor based on the Zen 4 architecture, codenamed Phoenix. It features a base clock of 4.20 GHz and a boost clock of 4.70 GHz. In synthetic benchmarks, it scores 20,851 points in Cinebench R23 multicore and 2,943 points in single-core. These results position it as a mid-range desktop chip, with an 82nd percentile ranking among all CPUs.

In Lockdown Protocol, the CPU's role becomes evident when examining the 1080p Low results. The 202.1 FPS figure is likely near the ceiling for this processor in this game, as the GPU has less work to do at lower resolutions and settings. The 3DMark scores support this: the chip achieves 6,091 points in the 16-thread test and 951 points in single-thread. The single-thread performance is crucial for FPS titles, as game logic and physics often rely on single-core speed.

The nearest rivals to the 8400F include the AMD Ryzen 7 2700X, which shows a 0% deltaPct, meaning they perform nearly identically in average benchmark scores. The AMD Ryzen 5 7500F is also close, with a 0.3% deltaPct, indicating the 8400F is slightly faster. This suggests that for Lockdown Protocol, the 8400F provides adequate processing power, but it is not a top-tier performer. The 6-core/12-thread configuration is sufficient for modern games, but the 16 MB of shared L3 cache might limit performance in scenarios with large data sets. The data indicates that the CPU is not the primary bottleneck at 1440p and 4K, as frame rates scale sharply with resolution, pointing to GPU limitations.

How This Combo Ranks

The Ryzen 5 8400F and RTX 5060 combination holds a rank of 811 out of 1,637 tested combos in Lockdown Protocol. This places it in the 49.5th percentile, meaning it outperforms roughly half of all tested systems. This is a middle-of-the-road result, suggesting that while the combo is capable, it is not exceptional for this particular game.

The ranking reflects the balance between the CPU and GPU. The RTX 5060 has a percentile ranking of 73 among all GPUs, which is relatively strong, while the CPU's percentile is 82. However, the combo's rank is lower than both individual component percentiles, indicating that the pairing might not be optimal for this workload. The nearest GPU rivals include the AMD Radeon RX 7700 XT with a 0% deltaPct, suggesting similar performance, and the NVIDIA GeForce RTX 5070 Mobile with a 0.6% deltaPct, meaning the RTX 5060 is slightly slower.

The fact that the combo ranks 811 out of 1,637 suggests that many other configurations deliver better performance in Lockdown Protocol. This could be due to the 8 GB VRAM limit on the GPU or the CPU's 6-core configuration, which may not be ideal for this game's engine. The data shows that the combo is capable of high frame rates at 1080p, but it falls behind at 4K, which likely contributes to its mid-pack ranking.

GPU Role

The NVIDIA GeForce RTX 5060 is built on the Blackwell 2.0 architecture and features 3,840 shading units, 30 RT cores, and 120 tensor cores. It has a base clock of 2,280 MHz and a boost clock of 2,497 MHz. The 8 GB of GDDR7 memory operates on a 128-bit bus, providing a bandwidth of 448.0 GB/s. The GPU's FP32 performance is rated at 19.18 TFLOPS, and it has a TDP of 145 W.

In Lockdown Protocol, the GPU is clearly the dominant factor in determining frame rates at higher resolutions. The 4K results show a significant decline: 62.1 FPS at High, 64.4 FPS at Medium, and 44.9 FPS at Ultra. The jump from 1440p to 4K is particularly damaging, with the High preset dropping from 93.9 FPS to 62.1 FPS, a 33.9% reduction. This indicates that the RTX 5060's memory bandwidth and VRAM capacity are being pushed to their limits at 4K.

The GPU's PassMark G3D score of 20,891 and its 73rd percentile ranking among all GPUs suggest it is a solid mid-range performer. However, its nearest rival, the AMD Radeon RX 7700 XT, has a 0% deltaPct, meaning they are statistically tied in average scores. The RTX 5060's 8 GB VRAM might be a limiting factor in Lockdown Protocol at 4K Ultra, as the frame rate drops below 45 FPS, suggesting the GPU is struggling to manage the memory load. At 1080p and 1440p, the GPU provides excellent performance, with 202.1 FPS at 1080p Low and 146 FPS at 1440p Low, showing that the card has ample headroom for competitive play at lower resolutions. The data suggests that the RTX 5060 is best suited for 1080p and 1440p gaming, where it can fully utilize its 19.18 TFLOPS of compute power without being constrained by its memory subsystem.