Lockdown Protocol

The AMD Ryzen 5 5600X and NVIDIA GeForce RTX 3070 Ti combination delivers a highly playable experience in Lockdown Protocol, with the data showing a clear shift in system bottleneck as resolution scales. At 1080p, the CPU is heavily utilized, but by 4K, the GPU becomes the definitive limiting factor. The measured frame rates reveal a system that is exceptionally strong for high-refresh 1440p gaming, while still capable of handling 4K with adjusted settings.

Resolution Scaling

The benchmark data shows a predictable yet pronounced drop in average FPS as resolution increases from 1920x1080 to 3840x2160. At High settings, the system delivers an average of 140.5 FPS at 1080p, which falls to 103.7 FPS at 1440p, and then to 66.6 FPS at 4K. This represents a 26% performance dip from 1080p to 1440p, followed by a more substantial 36% drop from 1440p to 4K. The scaling pattern indicates that the RTX 3070 Ti's rendering workload grows disproportionately at 4K, overwhelming its 8 GB GDDR6X memory and 256-bit bus.

At the Low preset, the frame rate scaling is even more revealing. The RTX 3070 Ti achieves 227.4 FPS at 1080p, 162.5 FPS at 1440p, and 107.1 FPS at 4K. The 53% reduction from 1080p to 4K at Low settings suggests that even when pixel shader load is minimized, the GPU's memory bandwidth of 608.3 GB/s becomes a limiting factor at higher resolutions. Conversely, the gap between Low and Ultra at 1080p is 120.9 FPS (227.4 vs 106.5), which narrows to 58.7 FPS at 4K (107.1 vs 48.4). This compression of performance deltas at 4K confirms that resolution scaling saturates the GPU's capabilities, making settings adjustments less impactful at higher pixel counts.

The data strongly indicates that Lockdown Protocol is GPU-bound at 1440p and 4K with this hardware. The CPU's 6 cores and 12 threads, boosting to 4.60 GHz, are sufficient to feed the GPU at lower resolutions, but the RTX 3070 Ti's pixel rate of 169.9 GPixel/s becomes the primary constraint as resolution increases. For players targeting 4K, the Ultra preset is not viable at 48.4 FPS average, while dropping to High recovers 18.2 FPS (37.6% improvement), suggesting that High is the practical ceiling for 4K gaming on this combination.

FAQ

*Q: What is the best resolution for this CPU/GPU combo in Lockdown Protocol?*

A: The data shows 2560x1440 as the optimal balance, with an average of 103.7 FPS at High settings and 78.2 FPS at Ultra. This resolution leverages the GPU's bandwidth without exposing its 4K limitations, while the 6-core/12-thread processor maintains consistent frame delivery.

Q: How does the Ultra preset affect performance compared to High?

A: At 1080p, Ultra reduces average FPS from 140.5 to 106.5, a 24.2% performance cost. At 1440p, the drop is from 103.7 to 78.2 FPS (24.6% reduction), and at 4K, from 66.6 to 48.4 FPS (27.3% reduction). The consistent penalty across resolutions indicates Ultra settings impose a uniform rendering load increase.

Q: Is the RTX 3070 Ti's 8 GB VRAM sufficient for this game?

A: Based on the measured FPS, the 8 GB GDDR6X memory appears adequate for all tested settings. The game does not show anomalous performance collapses at 4K Ultra (48.4 FPS), which would be expected if VRAM capacity were being exceeded and causing texture thrashing. The RTX 3070 Ti's 74th percentile ranking among all GPUs supports its capability.

*Q: Can this system hit 144 FPS in Lockdown Protocol?*

A: Yes, but only at 1080p. The Low preset achieves 227.4 FPS, Medium hits 162.4 FPS, and High reaches 140.5 FPS. At 1440p, only Low (162.5 FPS) and Medium (118.3 FPS) are above the 144 FPS threshold, while High falls just short at 103.7 FPS.

Q: How does the Ryzen 5 5600X compare to its closest rivals in synthetic benchmarks?

A: The 5600X has an average benchmark score of 20680, placing it in the 78th percentile of all CPUs. It trails the AMD Ryzen 5 5600GT by 0.3%, the Intel Core i7-10700 by 0.3%, and the Intel Core i5-12490F by 0.5%, while leading the Intel Xeon 6325P by 0.7%. These deltas are negligible for gaming.

Q: What is the frame rate difference between Low and Ultra at 1440p?

A: The spread is substantial, with Low averaging 162.5 FPS and Ultra averaging 78.2 FPS. This 84.3 FPS difference (107.8% improvement) shows that Lockdown Protocol's settings have a major impact on GPU load, making preset selection critical for high-refresh monitors.

CPU Role

The AMD Ryzen 5 5600X, built on the Zen 3 architecture with a 7 nm process, provides the computational foundation for this system. Its 6 cores and 12 threads operate at a base clock of 3.70 GHz and boost up to 4.60 GHz, with a 32 MB L3 cache. In synthetic testing, the chip scores 18578 in Cinebench R23 multi-core and 2622 in single-core, while achieving 3364 in Passmark single-thread tests. These scores place it in the 78th percentile of all CPUs, with an average benchmark score of 20680.

In Lockdown Protocol, the CPU's role is most evident at 1080p, where the frame rates exceed 140 FPS at High settings and reach 227.4 FPS at Low. The ability to sustain these high frame rates suggests the 5600X's single-thread performance is sufficient to avoid bottlenecking the GPU at lower resolutions. The 3DMark scores are telling: single-thread performance is 917, but 8-thread performance jumps to 4811, and max-thread reaches 5588. This scaling indicates that the processor can leverage its 12 threads effectively when the game engine demands more parallel work.

The nearest rival data shows the 5600X is well-positioned, with its average score of 20680 being only 0.3% lower than the AMD Ryzen 5 5600GT (20740) and Intel Core i7-10700 (20746). The performance delta to the Intel Core i5-12490F is 0.5%, while it leads the Intel Xeon 6325P by 0.7%. These margins are within run-to-run variance, confirming that the 5600X is competitive with its contemporaries for gaming workloads. The processor's 65W TDP and DDR4 memory support with 51.2 GB/s bandwidth are adequate for maintaining frame pacing, as evidenced by the consistent FPS averages across all tested resolutions.

Measured FPS Breakdown

At 1920x1080, the RTX 3070 Ti delivers its highest performance. The Low preset averages 227.4 FPS, which is the peak measured value across all tests. Medium settings reduce this to 162.4 FPS, High to 140.5 FPS, and Ultra to 106.5 FPS. The 120.9 FPS spread between Low and Ultra demonstrates that Lockdown Protocol has a wide range of visual fidelity options, and even at Ultra, the frame rate remains above 100 FPS, making 1080p gaming exceptionally smooth.

Moving to 2560x1440, the performance remains strong but shows the GPU starting to work harder. Low averages 162.5 FPS, which is only 28.6% lower than the 1080p Low result. Medium achieves 118.3 FPS, High hits 103.7 FPS, and Ultra drops to 78.2 FPS. The 1440p High result of 103.7 FPS is particularly noteworthy, as it offers a high-quality experience that exceeds 100 FPS, ideal for 144Hz monitors. The Ultra preset at 78.2 FPS is still playable but sacrifices the high-refresh advantage.

At 3840x2160, the GPU is clearly the limiting component. The Low preset averages 107.1 FPS, which is surprisingly high for 4K, but this drops to 78.4 FPS at Medium, 66.6 FPS at High, and only 48.4 FPS at Ultra. The 4K Ultra result is below the 60 FPS threshold, indicating that this setting is not suitable for smooth gameplay. However, the 4K High result of 66.6 FPS is above 60 FPS, providing a viable option for 4K displays with VRR support. The data shows that dropping from Ultra to High at 4K yields 18.2 FPS (37.6% improvement), while dropping from High to Medium yields 11.8 FPS (17.7% improvement).

GPU Role

The NVIDIA GeForce RTX 3070 Ti, based on the GA104 chip and Ampere architecture, is the primary driver of Lockdown Protocol's visual output. Its 6144 shading units, 192 TMUs, and 96 ROPs deliver a pixel rate of 169.9 GPixel/s and a texture rate of 339.8 GTexel/s. The GPU operates at a boost clock of 1770 MHz and features 8 GB of GDDR6X memory across a 256-bit bus, achieving a bandwidth of 608.3 GB/s. In synthetic benchmarks, the RTX 3070 Ti scores 23356 in Passmark G3D and 3478 in 3DMark Steel Nomad DX12, placing it in the 74th percentile of all GPUs.

The measured FPS data shows the GPU's performance scaling with settings. At 1080p Low, the card achieves 227.4 FPS, but this drops to 106.5 FPS at Ultra, a 53.2% reduction. This large delta indicates that Ultra settings heavily tax the GPU's shading units and memory subsystem. The RTX 3070 Ti's 21.75 TFLOPS FP32 compute is sufficient for the game's DirectX 12 Ultimate requirements, but the 8 GB VRAM and 608.3 GB/s bandwidth become constraints at 4K Ultra, where the 48.4 FPS average reflects the GPU's limits.

The nearest rival data places the RTX 3070 Ti in a competitive position. Its average benchmark score of 30849 is 0.3% higher than the AMD Radeon RX 590 GME (30755), 0.8% lower than the AMD Radeon RX 6700 (31112), and 0.9% lower than the NVIDIA Quadro M5000 (31142). These small deltas suggest that the RTX 3070 Ti is well-matched against its peers, though its end-of-life production status and 290W TDP indicate it is a previous-generation solution. For Lockdown Protocol specifically, the GPU's performance at 1440p High (103.7 FPS) and 4K High (66.6 FPS) demonstrates that it can handle the game's demands across most settings, with only 4K Ultra falling below the 60 FPS threshold. The RTX 3070 Ti's 74th percentile ranking among all GPUs confirms it is a solid mid-range-to-high-end option for this title.