Lockdown Protocol

The AMD Ryzen 5 5600X and NVIDIA GeForce RTX 2060 combination delivers a solid 1080p and 1440p experience in Lockdown Protocol, though 4K remains a challenge. Benchmark data shows the pairing ranks 1339th out of 1637 tested combos, placing it in the lower-middle tier of the database. The measured frame rates reveal a system that is clearly capable of high-refresh 1080p gaming with adjusted settings, but the 6 GB VRAM and mid-range GPU compute limits push 4K performance below playable thresholds at higher presets.

FAQ

Q: What is the best resolution for this combo in Lockdown Protocol?

A: The data indicates 1920x1080 is the optimal resolution. At Low settings, the combo achieves 143.1 FPS average, and even at Medium settings it holds 104.5 FPS. Performance at 2560x1440 is playable but requires preset adjustments, while 3840x2160 drops below 50 FPS on all presets except Low.

Q: How much faster is the combo at 1080p Low compared to 4K Ultra?

A: The difference is substantial. At 1920x1080 with Low settings, the average frame rate is 143.1 FPS, which is 4.2 times higher than the 34.4 FPS recorded at 3840x2160 with Ultra settings. This highlights the extreme scaling demands of 4K rendering.

Q: Does the RTX 2060's 6 GB VRAM become a bottleneck?

A: The measured data suggests VRAM capacity is a limiting factor at higher resolutions. At 4K Ultra, the average FPS drops to 34.4, while 4K High only reaches 44.6 FPS. The 6 GB GDDR6 memory with 336.0 GB/s bandwidth appears insufficient for the texture and geometry loads at 3840x2160.

Q: Which preset provides the largest performance jump?

A: Switching from Medium to Low provides the most significant gains. At 1920x1080, moving from Medium (104.5 FPS) to Low (143.1 FPS) yields a 37% increase. At 2560x1440, the same switch jumps from 77.8 FPS to 107.5 FPS, a 38% improvement.

Q: Is the Ryzen 5 5600X holding back the RTX 2060?

A: The CPU's benchmark scores suggest it is not the primary constraint. The Ryzen 5 5600X posts a Cinebench R23 multi-core score of 18578 and a single-core score of 2622, placing it in the 78th percentile of all CPUs. The GPU's PassMark G3D score of 14111 and 58th percentile ranking indicate the graphics card is more likely the performance limiter.

Q: How does this combo compare to the nearest GPU rival?

A: The RTX 2060's average benchmark score of 16074 is 0.5% higher than the AMD Radeon RX 7600S (15996), which is the closest rival. The delta is within the margin of error, meaning performance parity is expected.

Settings Recommendations

For the best balance of visual quality and frame rate, the Medium preset at 1920x1080 is the recommended starting point. The data shows 104.5 FPS average at this setting, which provides smooth gameplay while retaining better visual fidelity than Low. Players with high-refresh monitors should consider Low settings to reach 143.1 FPS, as the jump from Medium to Low is the most efficient performance gain in the dataset.

At 2560x1440, Medium settings deliver 77.8 FPS, which is adequate for most competitive scenarios. Dropping to Low increases this to 107.5 FPS, a substantial improvement that may justify the visual trade-offs for players prioritizing framerate. High settings at 1440p produce 63.7 FPS, which remains playable but leaves little headroom for demanding scenes.

The Ultra preset is not recommended at any resolution. At 1920x1080 it yields 67.1 FPS, which is only 64% of the Medium preset's performance. At 2560x1440, Ultra drops to 48.6 FPS, and at 3840x2160 it falls to 34.4 FPS. The data shows diminishing returns from Ultra settings relative to the substantial frame rate cost.

For 4K gaming, only the Low preset is viable, producing 70.4 FPS average. Medium at 4K drops to 48.5 FPS, and High falls to 44.6 FPS, both below the 60 FPS threshold that most players prefer. The performance scaling across presets indicates that Lockdown Protocol's visual settings have a significant impact on the GPU load.

GPU Role

The NVIDIA GeForce RTX 2060 is the defining component in this pairing, and its specifications explain the measured performance patterns. The GPU features 1920 shading units, 120 texture mapping units, and 48 render output units, with a boost clock of 1680 MHz. Its FP32 performance of 6.451 TFLOPS and texture rate of 201.6 GTexel/s provide the raw compute needed for modern FPS titles.

The 6 GB GDDR6 memory on a 192-bit bus delivers 336.0 GB/s of bandwidth. This configuration is adequate for 1080p and 1440p gaming, but the 4K results reveal the limitation. At 3840x2160, the frame rates scale poorly: 70.4 FPS at Low, 48.5 FPS at Medium, 44.6 FPS at High, and 34.4 FPS at Ultra. This pattern suggests memory bandwidth and capacity constraints at higher resolutions.

The GPU's architecture includes 30 RT cores and 240 tensor cores, supporting DirectX 12 Ultimate and Vulkan 1.4. The PassMark G3D score of 14111 places it in the 58th percentile of all GPUs, while its nearest rival, the AMD Radeon RX 7600S, scores 15996, a 0.5% difference. The GPU's PassMark DirectX 12 score of 53 is notably lower than its DirectX 11 score of 110, which may affect performance in titles using newer DX12 features.

The 160 W TDP and dual-slot design are modest for a desktop GPU, and the 450 W suggested PSU requirement is reasonable. The PCIe 3.0 x16 interface is a potential bottleneck given that the CPU supports PCIe Gen 4, but the measured data does not indicate this is a limiting factor in Lockdown Protocol.

How This Combo Ranks

The combination ranks 1339th out of 1637 tested combos in Lockdown Protocol, placing it in the bottom 18% of the database. This ranking reflects the age of both components: the RTX 2060 launched in January 2019 and is now end-of-life, while the Ryzen 5 5600X debuted in November 2020. The pairing is functional but not competitive with modern hardware.

The CPU's average benchmark score of 20680 places it in the 78th percentile of all CPUs, which is respectable. Its nearest rivals include the AMD Ryzen 5 5600GT (20740, -0.3% delta) and the Intel Core i7-10700 (20746, -0.3% delta), indicating the 5600X is closely matched with its contemporaries. The GPU's average score of 16074 places it in the 58th percentile, with the AMD Radeon Pro 5700 (16351, -1.7% delta) as a slightly faster alternative.

The rank of 1339 out of 1637 suggests that most other tested combinations deliver higher average frame rates in Lockdown Protocol. The measured data shows the combo is capable of 143.1 FPS at 1080p Low, but many rivals likely exceed this at higher presets. The combination's performance profile is typical of a mid-range system from the 2019-2020 era, and the data confirms it is better suited to 1080p gaming than higher resolutions.

CPU Role

The AMD Ryzen 5 5600X provides 6 cores and 12 threads, based on the Zen 3 architecture on a 7 nm process. Its base clock of 3.70 GHz and boost clock of 4.60 GHz deliver strong single-thread performance, which is critical for FPS games. The CPU's 32 MB L3 cache and dual-channel DDR4 memory support with 51.2 GB/s bandwidth ensure adequate data throughput for gaming workloads.

The CPU's benchmark scores show balanced performance across synthetic tests. The Cinebench R23 multi-core score of 18578 and single-core score of 2622 indicate strong multi-threaded and single-threaded capabilities. The PassMark single-thread score of 3364 reinforces this, while the multi-thread score of 21858 suggests the 6-core configuration handles parallel workloads effectively.

The measured frame rates in Lockdown Protocol suggest the CPU is not the primary bottleneck. At 1080p Low, the combo achieves 143.1 FPS, which is likely near the CPU's limit for this title given the GPU's mid-range positioning. The CPU's 78th percentile ranking and its close competition with the Ryzen 5 5600GT (-0.3% delta) suggest that upgrading the GPU would yield greater performance gains than upgrading the CPU.

The CPU's 65 W TDP and unlocked multiplier make it an efficient and overclockable option. Its 4,150 million transistors on a 74 mm² die are modest by modern standards, but the Zen 3 architecture provides strong instructions-per-clock performance. The socket AM4 platform supports PCIe Gen 4, though the GPU only utilizes PCIe 3.0, which does not appear to hinder results based on the measured data.