Lockdown Protocol

# Lockdown Protocol — AMD Ryzen 5 5500X3D + NVIDIA GeForce RTX 4070 Ti

The AMD Ryzen 5 5500X3D paired with the NVIDIA GeForce RTX 4070 Ti delivers a compelling 1080p and 1440p experience in Lockdown Protocol, with the data showing a clear shift from CPU-bound behavior at lower resolutions to GPU-bound behavior as the resolution climbs to 4K. The combo ranks 428th out of 2,828 tested configurations, placing it comfortably in the top 15% of all combinations, and the measured frame rates reveal a system that can handle high-refresh-rate gameplay at 1440p while maintaining playable performance at 4K with adjusted settings.

Resolution Scaling

The measured FPS data across the three resolutions paints a clear picture of where this system's bottleneck shifts. At 1080p with Low settings, the combo achieves 230 FPS, while 1440p Low drops to 207 FPS, and 4K Low falls to 144 FPS. This represents a 37% reduction from 1080p to 4K at Low settings, indicating that even at the lowest graphical preset, the resolution increase still imposes a substantial load on the GPU. The scaling from 1080p to 1440p at Low settings is a modest 10% drop, suggesting the CPU is still contributing meaningfully at 1080p, but the 4K jump reveals the RTX 4070 Ti's rendering limits.

At High settings, the pattern becomes more pronounced. The system produces 189 FPS at 1080p, 139 FPS at 1440p, and 90 FPS at 4K. The 1080p-to-1440p drop is 26%, while the 1440p-to-4K drop is 35%, showing that the GPU becomes increasingly dominant as resolution rises. The Ultra preset tells a similar story: 142 FPS at 1080p, 104 FPS at 1440p, and 67 FPS at 4K. Here, the 1080p-to-1440p reduction is 27%, and the 1440p-to-4K reduction is 36%, reinforcing that the RTX 4070 Ti is the limiting factor at higher resolutions.

The Medium preset provides the most granular data, with min and max FPS recorded. At 1080p Medium, the average is 202 FPS with a minimum of 172 and maximum of 233. At 1440p Medium, the average drops to 159 FPS, with a range of 135 to 183. At 4K Medium, the average falls to 103 FPS, with a minimum of 87 and maximum of 118. The min-to-max spread widens at lower resolutions—61 FPS at 1080p versus 31 FPS at 4K—suggesting that CPU-driven frame time variability is more noticeable at 1080p, while the GPU delivers more consistent frame pacing at 4K.

The data indicates that 1080p is largely CPU-bound, as evidenced by the relatively small FPS differences between Low and Ultra presets at that resolution (230 versus 142 FPS, a 38% spread). At 4K, however, the preset selection matters far more: Low produces 144 FPS, while Ultra drops to 67 FPS, a 53% spread. This confirms that the RTX 4070 Ti's rendering throughput becomes the primary constraint at 4K, while the Ryzen 5 5500X3D's processing power can keep up with lower-resolution demands.

CPU Role

The AMD Ryzen 5 5500X3D is a 6-core, 12-thread processor based on the Zen 3 architecture, codenamed Vermeer, built on TSMC's 7 nm process. It operates with a base clock of 3.00 GHz and a boost clock of 4.00 GHz, with a 105 W TDP. The standout feature is the 96 MB shared L3 cache, which is substantial for a 5000-series chip and contributes to the processor's 85th percentile ranking among all CPUs. The CPU's average benchmark score is 37,018, placing it within 0.3% of its nearest rivals, including the AMD Ryzen 5 5600F, AMD Ryzen AI 7 PRO 450, Intel Core Ultra 5 225, and Intel Core i9-12900T.

In Lockdown Protocol, the CPU's role is most evident at 1080p, where the system achieves 230 FPS at Low settings—a figure that suggests the 12 threads are sufficient to feed the GPU without bottlenecking at lower resolutions. The PassMark single-thread score of 2,941 and multithread score of 20,363 indicate balanced performance, with the 96 MB L3 cache likely helping with game-world data access patterns typical of FPS titles. The CPU's floating-point math score of 34,511 and integer math score of 60,033 provide additional context, but the game-specific results show that the 5500X3D can maintain high frame delivery at 1080p even with the GPU pushing beyond 200 FPS.

The data shows that the CPU's influence diminishes as resolution increases. At 4K, the FPS differences between presets are driven almost entirely by GPU load, with the CPU maintaining frame delivery above 67 FPS even at Ultra settings. The 5500X3D's 6 cores and 12 threads appear adequate for Lockdown Protocol's engine, as no min FPS data was recorded for most settings, and the Medium preset min FPS values (172 at 1080p, 135 at 1440p, 87 at 4K) suggest no severe CPU-induced stuttering. The CPU's 85th percentile ranking versus all CPUs, combined with its proximity to rivals like the Ryzen 5 5600F (0.2% higher average score) and Intel Core Ultra 5 225 (0.2% higher), indicates it is a mid-to-upper-tier processor that pairs well with the RTX 4070 Ti for this title.

Settings Recommendations

The measured FPS data provides clear guidance for optimizing the Lockdown Protocol experience with this hardware. At 1080p, the Low preset delivers 230 FPS, but the Medium preset still achieves 202 FPS with a minimum of 172 FPS, making it the recommended choice for high-refresh-rate monitors. The Ultra preset at 142 FPS is also playable, but the 60 FPS gap between Low and Ultra suggests diminishing returns for the extra graphical fidelity. For competitive play where frame rate is paramount, Low or Medium at 1080p offers the headroom needed for 240 Hz displays, though the data shows the system cannot quite sustain 240 FPS even at Low settings.

At 1440p, the Medium preset provides the best balance, with 159 FPS average and a minimum of 135 FPS. This keeps frame rates above the typical 144 Hz refresh rate threshold while maintaining visual quality. The High preset at 139 FPS is also viable for 144 Hz displays, but the Medium preset's 20 FPS advantage over High makes it the superior choice. The Ultra preset at 104 FPS is playable but drops below the 120 FPS mark, which may be noticeable in fast-paced FPS gameplay. The Low preset at 207 FPS is excessive for most 1440p monitors and sacrifices too much visual fidelity.

At 4K, the recommendations shift toward lower presets. The Low preset achieves 144 FPS, which is excellent for 4K gaming but requires significant visual compromises. The Medium preset at 103 FPS with a minimum of 87 FPS is the most balanced option, providing decent visual quality while staying above 60 FPS consistently. The High preset at 90 FPS is also playable, but the Ultra preset at 67 FPS, while technically above 60 FPS, leaves little headroom for demanding scenes. For 4K, Medium is the recommended preset, as it offers the best combination of frame rate and visual quality without dipping below 87 FPS.

How This Combo Ranks

The combination of the AMD Ryzen 5 5500X3D and NVIDIA GeForce RTX 4070 Ti ranks 428th out of 2,828 tested combos in Lockdown Protocol, placing it in the top 15.1% of all configurations. This ranking reflects the system's strong performance at 1080p and 1440p, where the data shows frame rates exceeding 200 FPS at lower presets. The GPU's 84th percentile ranking among all GPUs, with an average benchmark score of 44,795, and the CPU's 85th percentile ranking, with an average score of 37,018, indicate that both components are well above average, and their combination produces a balanced system for this game.

The GPU's nearest rivals include the NVIDIA GeForce RTX 5090 Mobile (0.8% higher average score), AMD Radeon Pro 5500 XT (1.3% higher), NVIDIA RTX A6000 (1.6% lower), and Intel Arc A730M (1.7% higher). These comparisons show that the RTX 4070 Ti sits in a competitive middle ground, with its performance being within 1.7% of several very different GPUs. The CPU's nearest rivals are similarly close, with the Ryzen 5 5600F and Intel Core Ultra 5 225 both being 0.2% faster, and the Ryzen AI 7 PRO 450 being 0.2% slower.

The combo's 428th rank out of 2,828 suggests that while it is not a top-tier configuration, it outperforms the majority of tested systems in Lockdown Protocol. The data indicates that the system is well-suited for high-refresh-rate 1080p and 1440p gaming, with the 4K performance being acceptable at lower presets. The rank reflects the synergy between the 5500X3D's strong cache architecture and the RTX 4070 Ti's rendering capabilities, resulting in a system that delivers competitive frame rates across all tested resolutions.

FAQ

Q: What is the best resolution for this combo in Lockdown Protocol?

A: The data shows 1440p Medium offers 159 FPS average with a minimum of 135 FPS, making it the sweet spot for high-refresh-rate gaming. At 1080p, the system exceeds 200 FPS on Medium, but 1440p provides better visual quality while still maintaining frame rates above 135 FPS.

Q: Can this system handle 4K gaming in Lockdown Protocol?

A: Yes, but with caveats. At 4K Medium, the average FPS is 103 with a minimum of 87, while at 4K Low, it reaches 144 FPS. The Ultra preset drops to 67 FPS, which is playable but leaves limited headroom. Medium is the recommended 4K preset for this hardware.

Q: How does the CPU compare to its nearest rivals?

A: The Ryzen 5 5500X3D has an average benchmark score of 37,018, placing it 0.2% behind the Ryzen 5 5600F and Intel Core Ultra 5 225, and 0.2% ahead of the Ryzen AI 7 PRO 450. The Core i9-12900T is 0.3% faster. All rivals are within 0.3% of each other.

Q: What is the GPU's performance relative to its closest competitors?

A: The RTX 4070 Ti has an average benchmark score of 44,795, which is 0.8% lower than the RTX 5090 Mobile, 1.3% lower than the Radeon Pro 5500 XT, 1.6% higher than the RTX A6000, and 1.7% lower than the Intel Arc A730M.

Q: Is the system CPU-bound or GPU-bound at 1080p?

A: The data suggests the system is partially CPU-bound at 1080p. The FPS difference between Low (230) and Ultra (142) is 38%, while at 4K the difference is 53% (144 versus 67). The smaller spread at 1080p indicates the CPU limits frame rates before the GPU becomes fully saturated.

Q: What is the combo's overall ranking?

A: This combination ranks 428th out of 2,828 tested combos in Lockdown Protocol, placing it in the top 15.1% of all configurations. This rank reflects the balanced performance of the 5500X3D and RTX 4070 Ti across all tested resolutions.

Measured FPS Breakdown

At 1920x1080, the system delivers 230 FPS on Low, 202 FPS on Medium (with a minimum of 172 and maximum of 233), 189 FPS on High, and 142 FPS on Ultra. The Medium preset shows the widest range between minimum and maximum FPS, indicating some frame time variability, but the overall averages are consistently above 140 FPS across all presets.

At 2560x1440, the measured averages are 207 FPS on Low, 159 FPS on Medium (with a minimum of 135 and maximum of 183), 139 FPS on High, and 104 FPS on Ultra. The Medium preset's minimum of 135 FPS ensures that frame rates stay above the 120 FPS threshold, while the Ultra preset dips to 104 FPS, which is still smooth for most displays.

At 3840x2160, the averages drop to 144 FPS on Low, 103 FPS on Medium (with a minimum of 87 and maximum of 118), 90 FPS on High, and 67 FPS on Ultra. The Medium preset's minimum of 87 FPS is notably lower than the average, suggesting occasional frame drops, but it remains above 60 FPS. The Low preset at 144 FPS is the only 4K setting that approaches high-refresh-rate territory.

The data shows a consistent pattern across all resolutions: the Low-to-Medium gap is smaller than the Medium-to-High or High-to-Ultra gaps, indicating that the Medium preset captures most of the performance headroom while providing superior visuals to Low. The Ultra preset consistently delivers the lowest FPS, with the 4K Ultra value of 67 FPS being the only measurement close to the 60 FPS baseline.

GPU Role

The NVIDIA GeForce RTX 4070 Ti is built on the Ada Lovelace architecture with the AD104 chip on TSMC's 5 nm process, containing 35,800 million transistors on a 294 mm² die. It features 12 GB of GDDR6X memory on a 192-bit bus, delivering 504.2 GB/s of bandwidth. The GPU operates at a base clock of 2310 MHz and a boost clock of 2610 MHz, with memory running at 1313 MHz (21 Gbps effective). It has 7,680 shading units, 240 texture mapping units, and 80 raster output units, along with 60 ray tracing cores and 240 tensor cores.

In Lockdown Protocol, the GPU's role becomes increasingly dominant as resolution rises. At 1080p, the data shows that the GPU can deliver over 200 FPS at Low and Medium presets, but the CPU limits the maximum frame rate, as evidenced by the 230 FPS cap at Low settings. At 1440p, the GPU's rendering load increases, and the FPS drops to 207 FPS on Low, showing that the GPU is now the primary constraint. At 4K, the GPU is clearly the bottleneck, with the Ultra preset producing 67 FPS—a 71% reduction from the 1080p Ultra figure of 142 FPS.

The GPU's 84th percentile ranking among all GPUs, with an average benchmark score of 44,795, indicates it is a strong performer. Its PassMark G3D score of 31,624 and GPU compute score of 18,396 provide additional context, but the game-specific data shows that the RTX 4070 Ti is well-suited for Lockdown Protocol at 1080p and 1440p, with acceptable 4K performance at Medium settings. The 12 GB VRAM capacity is sufficient for the game's requirements, as no VRAM-related performance issues are indicated in the measured data. The GPU's 285 W TDP and dual-slot design are consistent with its performance class, and its 1x 16-pin power connector requires a 600 W suggested PSU, though these power figures are not directly reflected in the game's FPS measurements.